Recent content by sniper OCD

how do i get ahold of your non magnetic head. you have paypal

how do i get ahold of your non magnetic head. you have paypal

take your head and have it bored to 62 mm and make sure they are a hyperyotetic machine capable shop. .005 tolerance with diamond machine or get a molossi 64mm or 74mm cylinder. http://www.malossistore.be/Prodotto.asp ... MA250&C=31 9578 im going for the 74mm if it will fit , need to make a...

been faster on a sniper t135 ive been at 190 kph on sniper gps used for speed acuraccy .16 tooth frount 34 tooth rear. with major Horse power. and you have six gears! so keep working at it. :idea:

IF YOU CHANGE YOUR GEARS YOU CHANGE YOUR SPEDO IT HAS A PICKUP OFF THE FROUNT SPROCKET. I HAVE A SNIPER THAT WILL LEAVE A R 15 IN THE DUST JUST LIKE I DO THE RAIDER 150. IM RUNNING ABOUT 200KPH ON GPS . WITH 248 CC AND YES I HAVE A DIGITAL DASH ALSO THAT IS WAY OFF DUE TO CHANGING GEARS TO...

now being the soninlaw of the inventer of the high intensity LED what do you condider HIGH, i CONSITER 5 WATT PER LED hIGH. YOURS ARE PROBLY .3 WATT OR LESS.

I get good gas milage if i drive normal, and normal engine wear. its all in the quality of the build. it takes a long time to drain my tank. i can go very far on my 14.4 liter tank. Im getting 15 km to the liter. 216 km before refuling.this is the exact same as my Honda 919rr fireblade. at 138...

im ordering a new one in the morning for my 2,000 km sniper. have to bore it one mm over to run my 64mm piston. i think my compression is a little high my clutch slips when i try to kick start it. need a racing clutch and springs, I would say . clutch is in perfect shape. right now I have my...

im running a 64 piston with a nicer piston than mollasi. 190cc + i used a vixion cylinder and bored it out . the honeing is a long drown out procidure as it has to be perfect or your cylinder wont last.

man i just put my sniper to 190 cc 13.1 compresion. ported out the head and everything else i could touch. running stock came for break in and then going back to my stage 2. doing the math I should hit 28 kw or 32 hp or better. ill let you know if it blows when i hit the gas whith my stage 2...

getting past the speed wabble 130 kmh in 3rd gear dont have a long enough surface for 4th. . im trying to figure out how to get rid of the high speed wobble im getting from the forks in forth gear. i may need to get new fork setup. im planning on reduing my whole frame anyway like the r1...