• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

200cc - Which Would You Choose

TryX

New Member
As I have read in Racing Boys FB page, it is for a 177cc engine...

as they have claimed, you will be achieving the 28hp with installing this head together with 62mm Uma Block, 34mm carb and a good exhaust...

they also said the valves is 25mm... they did not mentioned the size of the exhaust valve...
But that is just a figure from Racing Boy bro. If u try setting your machine and test it on the track than will be different feeling.. Like head to head shootouts against different combinations of mod..
 

alx.cruz

Super Veteran
But that is just a figure from Racing Boy bro. If u try setting your machine and test it on the track than will be different feeling.. Like head to head shootouts against different combinations of mod..
Yes, I know that they are just figures from Racing Boy... but the 28hp claim is very possible and you dont need to have too much engine displacement for that... and for them (Racing Boy) to give a false claim would be very bad for their reputation... btw, racing boy and uma racing are sister companies...

let me give you an example... The Takegawa Superhead+R, which is a 2 valved engine and with a displacement of 178cc only registered 24hp on dyno test...

we are talking about a 4 valve engine here and as we all know, 4 valve engines delivers more power than 2 valve engines... That is why it is very possible for a 177cc 4 valve engine to deliver a 28hp output...
 

rowan

Super Veteran
I got the feeling that UMA head is very big... Not suitable for normal machine that below 190cc... Need to be over 190cc to put that head on. I have been testing normal big bore like 60mm and 62mm using big head like 22/20 head but when i fight with machine with the same bore but using stock head. The Big head still loose to the small head bike... The power come not fast enough... Even big head is powerful but it take longer time before the power come.. Unless if the machine is jack rod than only i can can feel the not sinking power come pouring down to me.




i dont think so bro. bigger bore need bigger valves.
personally im using vixion kit and 22/19
our admin (traxxas)uses vixion kit and 22/18 valves
we can easily out run those who were using stock valves its not plug and play thing.
example"this racing boy products before they claimed it 28hp im sure they have tested it and have it installed properly
i wont be same 28hp if someone bought it and never put it right .

60mm borekit with 22/19 valves is way more powerful than our vixion kit w/22 19 valves
we personally do it and tested it
 

HKholic

Member
A lot of good points and questions brought up in this topic. I am going to put a new twist on this subject. I, myself, have really nothing left to do in the search for more power. I have gone through 3 cams, 2 big valve heads, 2 28mm carbs, 3 different pipes trying to find a combination that suits me. The 62mm bore I have had from the start, first mod purchase. That was only the beginning. I have enjoyed installing different parts to see their impact on power. It is what makes modding so addicting. So, my current setup: 62mm block, 22/18 ported head w/high lift cam, Mikuni TM28 carb w/pod air filter, BRT cdi, AHM M1 exhaust. Don't get me wrong, it is quick. But I want more. A 200cc sounds just about right! Calculations and more calculations of finding a path to 200cc. 65mm block or keep my current 62mm with a jack-up crank. Now as a play/commuter, ( play first, because this bike does not see rain and is not ridden everyday), I have studied which combination would give the most "usable" power delivery. I think a jack-up crank may give me the extra torque I am looking for. As of now, power is mostly topend. I have swapped cams over and over again trying to find one I liked. Faito turbo is my favorite. It may not give the highest output but it has a nice "hit" that makes me smile. You can say that my budget is a little higher than most people would spend, but this is my "hobby" so to speak. Take this how you like, just wanted to share some of what the purpose is of me building a 200cc monster. PLAY, PLAY, PLAY!! :D
 

docgabby

Super Veteran
remember guys speed cost money
doc gabby talk here about 200cc whether you choose or not
if u want to keep ur budget tight then its up to you and keeping things cheap you will end up an easy breakable bike.
10k alone is not sufficient unless you are satisfied with it ..a lot of things to consider to match the power of your bike like 200cc
especially on your stock parts. maintenance cost will double also unless you dont care for your bike.

i have only 150 cc but 10k is not enough to be honest
we modify our bike we dont spend on mech ...buying parts alone cost much
modifying bike is unending .you want better performance you have to spend. if you dont want to spend then dont modify and keep ur bike stock.just dont get envy on other bike's speed.


back to topic
now what would i choose for 200cc bike ? which is which??
i prefer 3.5 jack up and 62mm uma bore
if you want to modify dont make budget cuts
thats my own opinion only guys
:dance::hug::thumbsup::rolleyes::D
 

docgabby

Super Veteran
i dont think so bro. bigger bore need bigger valves.
personally im using vixion kit and 22/19
our admin (traxxas)uses vixion kit and 22/18 valves
we can easily out run those who were using stock valves its not plug and play thing.
example"this racing boy products before they claimed it 28hp im sure they have tested it and have it installed properly
i wont be same 28hp if someone bought it and never put it right .

60mm borekit with 22/19 valves is way more powerful than our vixion kit w/22 19 valves
we personally do it and tested it
hmmm..i use 63.5mm bore strokeup crank 3mm with 22/19 valves......that was send to me by hispeed 4 years ago....works fine....they say i should have gone 24in/22ex.....
 

TryX

New Member
Yes, I know that they are just figures from Racing Boy... but the 28hp claim is very possible and you dont need to have too much engine displacement for that... and for them (Racing Boy) to give a false claim would be very bad for their reputation... btw, racing boy and uma racing are sister companies...

let me give you an example... The Takegawa Superhead+R, which is a 2 valved engine and with a displacement of 178cc only registered 24hp on dyno test...

we are talking about a 4 valve engine here and as we all know, 4 valve engines delivers more power than 2 valve engines... That is why it is very possible for a 177cc 4 valve engine to deliver a 28hp output...
I not say anything about Racing Boy giving false claim.. So please read carefully what i say. I say it will be different if u actually setup the machine.. The number claim by Racing Boy just tell half of the story another half is we have to try it. I try smaller head like 22/19 and 22/20 but just from my riding style comparing with small head on big bore the power delivery abit slow. And not say is not powerful. Is way more powerful than small head but the power come abit late and when i changing gear i feel power abit sinking.. Not very ideal for me. Even i try bigger pipe and other combinations of mod to see if it will run better or not. But still i don't get the power i want unless it was jackrod. Than only the machine sound will come alive. And the power really crazy. So conclusion for me is Big head on lower than 190cc machine give good power but it come at higher RPM. But if u have more than 200cc machine with big head like 22/20 or 24/22. Than i can say is perfects. Short track or long track won't be a problem at all.
 

alx.cruz

Super Veteran
I not say anything about Racing Boy giving false claim.. So please read carefully what i say. I say it will be different if u actually setup the machine.. The number claim by Racing Boy just tell half of the story another half is we have to try it. I try smaller head like 22/19 and 22/20 but just from my riding style comparing with small head on big bore the power delivery abit slow. And not say is not powerful. Is way more powerful than small head but the power come abit late and when i changing gear i feel power abit sinking.. Not very ideal for me. Even i try bigger pipe and other combinations of mod to see if it will run better or not. But still i don't get the power i want unless it was jackrod. Than only the machine sound will come alive. And the power really crazy. So conclusion for me is Big head on lower than 190cc machine give good power but it come at higher RPM. But if u have more than 200cc machine with big head like 22/20 or 24/22. Than i can say is perfects. Short track or long track won't be a problem at all.
Hey... Did I mentioned that you said Racing Boy is giving a false claim? maybe you should be the one to read and understand carefully...

I mentioned that to give emphasis that Racing Boy has the credibility to make such claim... and also, if their mechanic/tuner can tune those part to achieve such horse power then why can't we?


We have a 165cc Sniper engine (lower than 190cc) with big head, but the power on low to mid rpm is crazy and even more powerful at high rpm... and you know what... its not about the big head, but its all about the camshaft...

Which puts me at a conclusion that the 28hp @ 177cc is very very possible...
 

TryX

New Member
Hey... Did I mentioned that you said Racing Boy is giving a false claim? maybe you should be the one to read and understand carefully...

I mentioned that to give emphasis that Racing Boy has the credibility to make such claim... and also, if their mechanic/tuner can tune those part to achieve such horse power then why can't we?


We have a 165cc Sniper engine (lower than 190cc) with big head, but the power on low to mid rpm is crazy and even more powerful at high rpm... and you know what... its not about the big head, but its all about the camshaft...

Which puts me at a conclusion that the 28hp @ 177cc is very very possible...
Like i say many time is possible. Just depend on what RPM than it will get that figure.. I never say it cannot right?
 

alx.cruz

Super Veteran
Like i say many time is possible. Just depend on what RPM than it will get that figure.. I never say it cannot right?
That is why racers are always on high rpm... who race on low rpms anyway...


With this head on a 200cc engine, will surely achieve more than 28hp..
 
Top