Ac To Hc Conversion..
- Thread starter Cerberus
- Start date
Francisco N. Maristela
Veteran
Sir, I used to have a Crypton Z converted to Manual Clutch using Yamaha's Original Kit.
It is almost plug and play with a modification on your handle bar and plastic cover to fit the new Clutch Level. You might as well convert it to full clutch since some conversion is partial, you can shift even without using the clutch lever. It depends on your mechanic. You might also need to replace your clutch lining and a stiffer clutch spring. Just make sure you use the original yamaha crank case and the rest of the accessories. after 1 year i now am now using Sniper MX.
It is almost plug and play with a modification on your handle bar and plastic cover to fit the new Clutch Level. You might as well convert it to full clutch since some conversion is partial, you can shift even without using the clutch lever. It depends on your mechanic. You might also need to replace your clutch lining and a stiffer clutch spring. Just make sure you use the original yamaha crank case and the rest of the accessories. after 1 year i now am now using Sniper MX.
manofsteel27
Veteran
mine is converted ac to hc..works perfectly well..one thing I notice is the sound that it makes..mas maingay ng konti compared when my mc is still AC..
manofsteel27
Veteran
with the kit that i bought,,,yeah sort of..plug n play..just a little bit of modification..with the topspeed..not sure about that, i never tested my mc to its full potential..even when still in ac..and now hc..im takot much hehehe
manofsteel27
Veteran
maybe the masters here can answer your querries for that matter...
manofsteel27
Veteran
4k sir...
Francisco N. Maristela
Veteran
Yes. the sound is comparable to my Sniper MX comparing my converted crypton.
Performance is the same as long it is installed correctly
Ericson
Super Veteran
hello there masters/brothers my conversion is still on waiting... hehe for some information my conversion goes like this.. first I bought the HC kit at first I thought it was just plug and play and then we realize that there's something wrong.. and that is I need to replace or modify my crank assy ( segunya ), since i choose to modify my crank assy I need to buy some parts like straight key and primary drive gear. And for more inputs we can contact sir @Bench Pineda for the performance.. =D hope that I help you.. 
hello there masters/brothers my conversion is still on waiting... hehe for some information my conversion goes like this.. first I bought the HC kit at first I thought it was just plug and play and then we realize that there's something wrong.. and that is I need to replace or modify my crank assy ( segunya ), since i choose to modify my crank assy I need to buy some parts like straight key and primary drive gear. And for more inputs we can contact sir @Bench Pineda for the performance.. =D hope that I help you..
i guess you ordered the Yamaha Parts from HC bike
if you used the syscast ac to hc kit, it should be ok, plug and play
manofsteel27
Veteran
whats the difference between the two sir?i guess you ordered the Yamaha Parts from HC bike
if you used the syscast ac to hc kit, it should be ok, plug and play
if you buy the parts from a HC bike
-side cover and internals,etc all from Yamaha Sniper HC, definitely you need to modify your crankshaft because HC crank has different length compared to AC crank.
BUT
if you buy the AC to HC conversion kit like this one, its Plug and Play
http://www.yamahat135.com/threads/f...h-ac-to-hc-conversion-kit-yamaha-sniper.9688/
its 99.99999% plug and play
Cerberus
New Member
LIKE!! Hahahahaha!!if you buy the parts from a HC bike
-side cover and internals,etc all from Yamaha Sniper HC, definitely you need to modify your crankshaft because HC crank has different length compared to AC crank.
BUT
if you buy the AC to HC conversion kit like this one, its Plug and Play
http://www.yamahat135.com/threads/f...h-ac-to-hc-conversion-kit-yamaha-sniper.9688/
its 99.99999% plug and play
manofsteel27
Veteran
http://www.yamahat135.com/threads/f...h-ac-to-hc-conversion-kit-yamaha-sniper.9688/
sir..in this kit..is there a thrust washer that is included here?..