• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Anong Gamit Mo na Bore Up Kit?

Rolly

Super Veteran
romkazoo said:
@Rolly

the bigger the bore, the more gas consume?
not necessarily. gas consumption depends more on the carb setting and tuning. if the carb is set correctly (proper jettings and adjustment), the difference in gas consumption with a stock setting is not so much but the difference in power is very noticeable. (based on personal experience)
 

BHER

Super Veteran
@ rolly
thanks for the info ..

what about the disadvantages pag naka bore up kit na ??
 

Rolly

Super Veteran
BHER135 said:
@ rolly
thanks for the info ..

what about the disadvantages pag naka bore up kit na ??
faster tire wear and you must also upgrade your brakes.. :D
 

Storm_rider

Super Veteran
malaki po ba talaga ang increase sa speed ng boreup kit? bakit po kaya need to change oil every 500km? gnun po ba talaga un? parang high maintenance?
 

m00nraker

Super Veteran
Storm_rider said:
malaki po ba talaga ang increase sa speed ng boreup kit? bakit po kaya need to change oil every 500km? gnun po ba talaga un? parang high maintenance?
ako kaya me nagpapalit every 500km eh dahil nadala na ko dun sa nangyare mc ko umusok mali pa ung unang mekaniko na napuntahan ko hehe.. nadoble gastos ko.. malaki talaga ung mababago medyo lalakas gas nga lang.. hehe laki ko pa...
 

markypong

Super Veteran
v-xion kit.... i've used it for about 3000kms without any problems. re: gas consumption ALMOST the same with stock, I see it irrelevant due to the power brought by the bigger bore.
 

markypong

Super Veteran
Storm_rider said:
malaki po ba talaga ang increase sa speed ng boreup kit? bakit po kaya need to change oil every 500km? gnun po ba talaga un? parang high maintenance?
ako depende sa usage ko ng MC ko... if i go on long trips and full throttle operation for prolonged period: 1000kms ang change oil, pag mejo tambay-tambay at tinatamad, inaabot ako ng mga 2000kms before change oil..... :) :)
 

yagbols

New Member
kakapalit ko plang ng CMR 61mm steel bore.. balak ko kc ibalik sa stock unfortunately medyo mahal un genuine parts nya.. kaya napabili ako ng bore kit.. nsa break in period pa ako ngaun and can't wait na ibirit hehehehe..... sbe nun mekanik na gumawa sken is tamang change oil lng daw para nde masira at tamang break in.. tska mag big carb daw ako para mas maramdaman un hatak ng snipee... un lng... hihi
 

lospeeder

Super Veteran
vixion kit...
advantages :
1.chrome bore (durability,pangmatagalan
2.halos same as fuel consumption sa stock block(proper tuning)
3.halos same sa stock bore ang heat pressure (after long ride)
4.easy to start using electric starter (no need hi amp battery)
5.parang stock lng ang tunog w/ stage1 cams
6.nakakadaya parang di ka nag upgrade

ano paba bale yan pa lang na experience ng fren ko hehehe

disadvantages:
......
 

markypong

Super Veteran
lospeeder said:
vixion kit...
advantages :
1.chrome bore (durability,pangmatagalan
2.halos same as fuel consumption sa stock block(proper tuning)
3.halos same sa stock bore ang heat pressure (after long ride)
4.easy to start using electric starter (no need hi amp battery)
5.parang stock lng ang tunog w/ stage1 cams
6.nakakadaya parang di ka nag upgrade

ano paba bale yan pa lang na experience ng fren ko hehehe

disadvantages:
......
bro lospeeder, vixion kit chromebore? :( :(
 

dowaldz

New Member
vixion kit sir...almost 3 years na,,,change oil every 1000km,, 34,000 km na ntatakbo,,,so far wala naman problema,,kahit babad sa birit,,basta alaga lang maintenace lagi,,,
 

romkazoo

Super Veteran
anu ba talga mas maganda, vixion kit, CMR, faito??

napansin ko kc mpa steel o chrome basta change oil and maintenance lang tatakbo ng matagal ang motmot
 

Rolly

Super Veteran
romkazoo said:
kung nka big bore ka like, 60 61mm o 62. di naba gagana starter natin?
if you are using the stock cam kaya pa ng electric starter but if you upgrade to a racing cam without the decompression pin, di na kaya ng electric start and mahirap na rin ikick start. what i'm doing is to use the electric and kick starters simultaneously.
 

Rolly

Super Veteran
as far as i know, there's no rcam that can readily accomodate the decompression pin. however, the kawahara k1 has a mark that you could use as a guide to make a hole for the decompression pin. a modern machine shop could easily drill the hole.
 

Rolly

Super Veteran
as far as i know, there's no rcam that can readily accomodate the decompression pin. however, the kawahara k1 has a mark that you could use as a guide to make a hole for the decompression pin. a modern machine shop could easily drill the hole. i am not aware if the other brands of rcam has that mark.
 
Top