• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Be cautious: bore up to vixion has some risk

Mas Catoer

Super Veteran
Guys.
I got info from some friend who use to have routine street race.
Boring up to 150cc vixion without changing the Connecting Piston Rod to vixion have its risk also.
It was reported know we already have 7 broken connecting rod.
Seems like the std t135 connecting can not handle the burden. Some of it even torn into 3 pieces.
Some also broken when revved.

So if you bore up to vixion do not leave the std connecting rod.
Don forget to change it guys.

Just my two cents. :) :)
 

haen

Super Veteran
well.. i've been using it up to > 10000 km.. crazy riding.. always at top speed.. using a programmable unlimiter CDI.. still doing fine alhamdullillaah.. maybe it's not all T135 have weak connecting rod or just per case.. or please do ask those who experiencing broken conrod.. what kind of mod they've done to their engine.. high comp ? cam change ?.. wrong cam sprocket TDC setting ?.. CMIIW

PS.
For extra protection..
1. Always use the vixion's PISTON PIN (i knew lots of vixion boreup users who DIDN'T change this while the stock T135 PISTON PIN has different LENGTH)
2. Harden process the conrod and cryo it if u have the time and money.. although these was not necessary at all... but for the faint hearted.. go for it..
 

Mas Catoer

Super Veteran
@Haen
Lucky you then.
Well I will try to ask if I meet them.
Maybe there are s'thing wrong wth the mods setting.
 

haen

Super Veteran
@traxxas : yes.. it had same specs.. length, pin hole size, big end size etc.. no difference at all.. only part code difference..

@mas catoer : yes.. me and my customers r so lucky then.. :)
 

traxxas-modifier

Super LOLO
Staff member
y4stroker said:
what suitable conrod then? Any suggestions?
conrod of vixion as mascatoer said...
dont know the part number

maybe the conrod of vixion is really more stiffer than t135...
or
does yamaha really change part numbers even if they are 100% exactly the same?
 

chiglai

Super Veteran
mine still doing well after a long ride.. still my daily bike.. still does top speeds everytime i hit the highway, still can go as fast as i want always doing practice run with my friends 160+cc mio. my conrod still intact...
 

X1R-Qan

New Member
seems fine to me.. been using about 3000km.. accelerated with high speed,
racing, dragging, doin' all kind of stunts stuff.. :twisted: stillthough, its unsatisfactory.. waiting for upgrading big valve head later from haen.
 

phl6684

Moderator
Staff member
i think that t135 conrod is smaller in lenght compared to vixion conrod...just my 2 cents here...
 

chiglai

Super Veteran
i dont think sniper has a shorter conrod compare to vixion they have the same stroke right? but the thing is if they have the same size bearing in the crankshaft.. but possible we can install vixion conrod in t135.. if vixion conrod is longer than the t135's then use spacers hehehe possible 1 or 2mm its like adding stroke to t135.. but increase the risk of engine malfunction.. not that durable for a daily use bike and specially not advicable for touring.. just my opinion
 

justkir

Super Veteran
erm...i had a different experienced but not with fzi block..currently im using a 60.5mm piston with aftermarket block... almost 20k of mileage...just today i have to overhaul again...the connecting just make noise....

just to share some of my new item...IBC P63 6305 bearings for the crankshaft...picture will upload later...

cheers....
 

Mas Catoer

Super Veteran
Hi guys
I didn't mean to scare yall.

What I posted was what reported by some friends who experienced that.
Sure some would have mods their bike in crazy manner or miscalculating it, I dont know, still need to figure it out.
But hearing from Bro Haen with his difference outcome is worth too.

Vixion conrod and T135 are identical in length. But vixion has bigger shaft.

So we may stick to original T135 conrod and drive with peaceful mind... :) :)
 
i was amazed that people who use vixion kit on their t135 has 21hp...can u give me address of that forum which shows the dyno result?
 
Top