brake light not functioning

[badboy5474]

hi guys.. i juz made my own fenderless . i made new lights for my bike by myself.. followed the wiring all juz like the stock backlight. i use the same kind of 6pin socket.. the problem is,.. my brake light is not functioning.. .

i used the normal 12v flash light.


i joined the wayers to the black n the yellow.. is it correct? or wrong?

plz help...

 

[odie]

check wiring again or better yet check it with a tester to sve time

 

[badboy5474]

already tested.... i am using stripe light as the run light and 1 blue flash light as brake light...

how v should do the wiring if v are using 2 different lights>>??

 

[ronnelmarc_21]

kindly post the pics of the bulb ur using,,,make sure na ure using the right one,..if LED is used u need to add diode for parklight mo,..
for brake, u can use any bulb coz its direct to battery,... blue wire AC signal is present take note LED wont work if connected directly.

 

[badboy5474]

kindly post the pics of the bulb ur using,,,make sure na ure using the right one,..if LED is used u need to add diode for parklight mo,..
for brake, u can use any bulb coz its direct to battery,... blue wire AC signal is present take note LED wont work if connected directly.

hi.... tq guys for ur help.. now it my flash light is working.. the wire for tiz light is opposite.. now i already doen it... thanks guys