Butas Ang Piston.

[febe gienel celebria]

Tamang break in lang. 60kmh average. 100kmh for a few seconds then back to 60kmh. Varying speed per gear level. After reaching 500 kms, full throttle all you want.

BTW, sinubukan ko ang Primo engine oil sa break in. Based on my observation, maganda ang response ng engine. Tahimik at smooth ang break in.

sir ask lng po... 5k odo ng MC... wats da best engine oil brand and geade??? thanks

 

[febe gienel celebria]

Tamang break in lang. 60kmh average. 100kmh for a few seconds then back to 60kmh. Varying speed per gear level. After reaching 500 kms, full throttle all you want.

BTW, sinubukan ko ang Primo engine oil sa break in. Based on my observation, maganda ang response ng engine. Tahimik at smooth ang break in.

nyc break=in sir.. ok lng po ba mghard break-in and soft?? kasi sa akin ganun gnawa ko...takot aq bka my nsira sa mc ko...thnks

 

[Paladin]

sir ask lng po... 5k odo ng MC... wats da best engine oil brand and geade??? thanks

Sa akin basta 20w 50 na langis okay sa akin. Wet clutch kasi ang sniper kaya kailangan medyo malapot. I've been a straight Yamalube user for 26,000kms. Just tried Primo this month. Madami pang magagandang engine oils dyan but so far yun palang dalawa ang natry ko and both are excellent.

 

[febe gienel celebria]

sir 5k odo mc... wats da best engine oil brand and grade??? salamat po

 

[febe gienel celebria]

Sa akin basta 20w 50 na langis okay sa akin. Wet clutch kasi ang sniper kaya kailangan medyo malapot. I've been a straight Yamalube user for 26,000kms. Just tried Primo this month. Madami pang magagandang engine oils dyan but so far yun palang dalawa ang natry ko and both are excellent.

salamat sir... h/c ksi MC ko... 5k odo ok lng ba ang 10w 40???

 

[Paladin]

nyc break=in sir.. ok lng po ba mghard break-in and soft?? kasi sa akin ganun gnawa ko...takot aq bka my nsira sa mc ko...thnks

Tamang break in lang paps (not soft not hard). Pag soft kasi matamlay ang MC after break in. Kapag hard naman baka sumabog, but okay narin if you want to take risk. Hindi pa kasi lapat ang piston rings sa cylinder kaya para sa akin tamang break in lang. ave 60kmh with varying speed per gear level. Sometimes I rev up to 100kmh for a few seconds then back to 60kmh. ganun lang for the first 1,000kms then bahala ka na after.

 

[Paladin]

salamat sir... h/c ksi MC ko... 5k odo ok lng ba ang 10w 40???

Okay lang din, malabnaw lang ng konti. May tendency kasi na magslide ang clutch if malabnaw. Better use engine oil that is 50 rather than 40 next time.

 

[febe gienel celebria]

Tamang break in lang paps (not soft not hard). Pag soft kasi matamlay ang MC after break in. Kapag hard naman baka sumabog, but okay narin if you want to take risk. Hindi pa kasi lapat ang piston rings sa cylinder kaya para sa akin tamang break in lang. ave 60kmh with varying speed per gear level. Sometimes I rev up to 100kmh for a few seconds then back to 60kmh. ganun lang for the first 1,000kms then bahala ka na after.

salamat paps ha.... 4k na odo ko.. ganun kasi break in ko.. my hard my soft... i do full throttle at 110 km/h.. below 150 odo noon... pasalamat aq hindi nag over heat... anu po ba resulta sa performance ng motor na hindi maganda ang break in??/ salamat

 

[febe gienel celebria]

Okay lang din, malabnaw lang ng konti. May tendency kasi na magslide ang clutch if malabnaw. Better use engine oil that is 50 rather than 40 next time.

ganun bah??? tsk... kasi parang mhina ung power ng mc ko eh... kya try ko gnun grade.. salamat sir

 

[Paladin]

salamat paps ha.... 4k na odo ko.. ganun kasi break in ko.. my hard my soft... i do full throttle at 110 km/h.. below 150 odo noon... pasalamat aq hindi nag over heat... anu po ba resulta sa performance ng motor na hindi maganda ang break in??/ salamat

mahina ang hatak at mababa ang top speed.

 

[febe gienel celebria]

mahina ang hatak at mababa ang top speed.

kaya pla... cguro gnun na mc ko

 

[febe gienel celebria]

mahina ang hatak at mababa ang top speed.

at 4k odo.. top speed ko 110 km/h lng... 1st gear - 45 kmh... 2nd - 75 kmh... 3rd - 100 kmh .. 4th - 110 kmh... kng yuyuko ako... abot 120kmh... ok lng po ba 2??? 4k odo??

 

[Paladin]

ano ba kakaibang napansin mo mc mo paps?

 

[Paladin]

at 4k odo.. top speed ko 110 km/h lng... 1st gear - 45 kmh... 2nd - 75 kmh... 3rd - 100 kmh .. 4th - 110 kmh... kng yuyuko ako... abot 120kmh... ok lng po ba 2??? 4k odo??

Okay naman ah. ganun din naman manakbo mc ko nung mga nasa ganung odo reading palang.
Suggestion lang, tamang break in lang. Hindi naman bibilis ang mc kung parating galit sa gas ang hinete eh. Nasa tamang gamit at maintenance and susi sa magandang performance ng motor.

 

[febe gienel celebria]

Okay naman ah. ganun din naman manakbo mc ko nung mga nasa ganung odo reading palang.

stock lng po sir ha... ilan odo mo sir at nka takbo mc mu hanggang 130??? stock lahat sir..

 

[febe gienel celebria]

ano ba kakaibang napansin mo mc mo paps?

npansin ko paps??hmmm vibration during 1/2 throttle... parang gnun lng eh,,, btw 4k odo hindi pa na tune up mc ko

 

[Paladin]

stock lng po sir ha... ilan odo mo sir at nka takbo mc mu hanggang 130??? stock lahat sir..

Nung 5k mc ko nakaka 130 ako pababa sa katipunan fly over all stock pati pipe.

npansin ko paps??hmmm vibration during 1/2 throttle... parang gnun lng eh,,, btw 4k odo hindi pa na tune up mc ko

Ma-vibrate talaga ang sniper kahit stock. Suggestion ko lang do minor tune up every 1,000 to 2,000kms.

OT na tayo paps, Sori. but don't worry I think okay naman pa ang MC mo.

 

[febe gienel celebria]

Nung 5k mc ko nakaka 130 ako pababa sa katipunan fly over all stock pati pipe.

Ma-vibrate talaga ang sniper kahit stock. Suggestion ko lang do minor tune up every 1,000 to 2,000kms.

OT na tayo paps, Sori. but don't worry I thing okay naman pa ang MC mo.

cge paps slamat sa advise... pasensya na... 1st tym ko ksi magka motor at sniper pa... salamat ride safe

 

[Samboy Del Rosario]

walangya kayo! hahaha nang iinget kayo hays mag 2weeks nang bakasyon ang MC ko tsk aabot pa ata ng 3 weeks pano wala paraw stock si sir EMCID ng forged piston so next week pa tapos marami pang gagawin bago mapaandar ulet hahaha nman! tapos mag bbreak in pa talaga nman! hahaha kainis...

kaya nga ako nag block agad di ko na tinapos break in ng stock bore dahil nkaka tamad ang break in process tapos ganun rin hahaha buset...

 

[febe gienel celebria]

walangya kayo! hahaha nang iinget kayo hays mag 2weeks nang bakasyon ang MC ko tsk aabot pa ata ng 3 weeks pano wala paraw stock si sir EMCID ng forged piston so next week pa tapos marami pang gagawin bago mapaandar ulet hahaha nman! tapos mag bbreak in pa talaga nman! hahaha kainis...

kaya nga ako nag block agad di ko na tinapos break in ng stock bore dahil nkaka tamad ang break in process tapos ganun rin hahaha buset...

after warranty nlng aq change ng mga ganun ah.. hehehe ride safe salamat