change clutch spring

[The Bidin]

Dunno lah y..mayb my bike`s really weak..compare 2 ur bike,rite bro?nvrmind.

 

[jerimode]

sir what is the best clutch lining for my sniper kasi paglong drive ako napansin ko parang humihina ang makina nagpalit narin ako ng clutch spring pero ganon pa rin. tnx and more power.

 

[juandelacruz]

sir what is the best clutch lining for my sniper kasi paglong drive ako napansin ko parang humihina ang makina nagpalit narin ako ng clutch spring pero ganon pa rin. tnx and more power.

sir fyi, this is an international forum so please be guided that you must use english..

as for your bike, i don't think that clutch spring alone will solve your problem..maybe it's due to heat that your bike experience weakness on long drives..change to a better oil or maybe check your cooling system as well..

 

[justkir]

is it true, for our bikes, the best is having the highest torque, meaning bigger bore? so that u know need to pressure the bike to much.... because the engine itself already have enough power... pls advice...

meaning after you have bigger bore, then you start to change the cam, valve spring, valve, port&polish the head, change gear ratios etc...

 

[juandelacruz]

AFAIK, higher torque engine is good for road bike because it produce power in a wide range of RPM..higher RPM bike settings, on the other hand, usually were used for race engine due to its potetial of higher power..the downside is that you need to always maintain high rpm to access the higher powerband..

 

[stroker]

AFAIK, higher torque engine is good for road bike because it produce power in a wide range of RPM..higher RPM bike settings, on the other hand, usually were used for race engine due to its potetial of higher power..the downside is that you need to always maintain high rpm to access the higher powerband..

Summed it up nice and sweet.

 

[lc-motospeed]

talking bout port n polish, how often should v have the head port n polished?

 

[rudduan]

i think u should polish your intake and exhaust manifold rather than port it,coz i did polished it and my bike feels smoother than before,if u want to pot it better let pro's did it for u,if polish u can do it yourself....this is juat my opinion.....

 

[lc-motospeed]

then how often should v do polishing?

 

[rudduan]

just once

 

[lc-motospeed]

juz once 4 the bike's whole life?

 

[ady_hnr007]

i use racing spring clutc too, but i only use two only. it's better too. not to hard, but pick up

 

[ady_hnr007]

i use racing sping clucth only two, not too hard, but still better pick up

 

[lc-motospeed]

yupp, 2 is sufficient... if u change all four u'll b having heavy finger exercise everyday =)