• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Dream Mods (100k, 50k, 25k Budget)

carltomy

Member
Hi guys!, newbie here..

What will you modify for your sniper if you have 50k :shag: /25k :thumbsup: peso budget?
You can post any parts: paint, stickers,seat, engine cover, cdi, v.springs, pipe, carbs, cams, park lights, head lights, swing arm, speedometer, tires etc, and ofcoure your safety gears! :)

Me first:

~50k++ - :shag:

~25k-49k - My budget right now, prices are estimates and subject to change without prior notice... hehe, and my planned mods are for everyday use.
Vixion Bore up kit 57mm- P6500
Rextor CDI - P4500
Vixion v.spring - P1700
Nob1 3Fold - P4000
Tires - Shinko 877 - F/R - P3000
HJC Helmet - P9000
Stickers - P1000
Shin/Knee guard - P1500
RB Rearset - P4500
Total: P35,700
 

tom snipes

Super Veteran
for 100 to 150k ,I'll add another mc.. honda super 4 maybe....i mean(150k) thats way too big for just mods,,-
 

raven

Super Veteran
... nice... super 4 would be great.. but if you really wanna put it on our beloved sniper.. hmmm.. a sniper with 200cc displacement that I can use everyday and for looooooooong rides... let's say Ride to Mindanao or North Loop.. Engine Modification/s that you wouldn't worry exceeding the capacity of your sniper.. haha ... but of course, that's just one of my crazy opinion.... hihi :oops:
 

chrisniper19

Super Veteran
50k budget goes a long way for me ive already reach that and still not satisfied need more changes... If i had 150k budget ill go for R15..... way to go.... :D

swifers personal file :angel:

swifer mods.jpg

excel file :D documented fill in the blanks :p engine mods next....
minus the helmet and balclava 66500 Php... labor not included +10% vat :p
 

Paladin

Super Veteran
I made a list of all the mods I put in my sniper:
CMS Valve spring, 61mm bore kit, faito clutch spring, faito clutch plate, RB fork stabilizer, nissin disk break assembly, corsa so1 f/r, rear set, Faito lighten valve, hi-speed forged piston, daytona quick throttle, RB bar end, RB throttle grip, decals, fibercraft tire hugger, Fibercraft engine cover, radiator cover, Fibercraft front sprocket cover, RB oil filter cover, TK Sprocket set, TK chain 428, bosch horn, X9 HID, X9 HID projector, BRT CDI, AHM M1 Pipe, RB clutch/break lever, soko side mirror, kaihin 28mm carb, moto suit seat cover, gas tank cover, Spark plug, LED lights and bulbs.
So far the total of these mods are are not more than P30,000. Not included the labor cost and other mods I replaced. So my total cost is more or less P40,000
Optional additional mods are koso digital speedometer, underneath with R6 taillight, swing arm and tranny
 

jangbest

Moderator
I made a list of all the mods I put in my sniper:
CMS Valve spring, 61mm bore kit, faito clutch spring, faito clutch plate, RB fork stabilizer, nissin disk break assembly, corsa so1 f/r, rear set, Faito lighten valve, hi-speed forged piston, daytona quick throttle, RB bar end, RB throttle grip, decals, fibercraft tire hugger, Fibercraft engine cover, radiator cover, Fibercraft front sprocket cover, RB oil filter cover, TK Sprocket set, TK chain 428, bosch horn, X9 HID, X9 HID projector, BRT CDI, AHM M1 Pipe, RB clutch/break lever, soko side mirror, kaihin 28mm carb, moto suit seat cover, gas tank cover, Spark plug, LED lights and bulbs.
So far the total of these mods are are not more than P30,000. Not included the labor cost and other mods I replaced. So my total cost is more or less P40,000
Optional additional mods are koso digital speedometer, underneath with R6 taillight, swing arm and tranny
Mamaw bike
 

chrisniper19

Super Veteran
I made a list of all the mods I put in my sniper:
CMS Valve spring, 61mm bore kit, faito clutch spring, faito clutch plate, RB fork stabilizer, nissin disk break assembly, corsa so1 f/r, rear set, Faito lighten valve, hi-speed forged piston, daytona quick throttle, RB bar end, RB throttle grip, decals, fibercraft tire hugger, Fibercraft engine cover, radiator cover, Fibercraft front sprocket cover, RB oil filter cover, TK Sprocket set, TK chain 428, bosch horn, X9 HID, X9 HID projector, BRT CDI, AHM M1 Pipe, RB clutch/break lever, soko side mirror, kaihin 28mm carb, moto suit seat cover, gas tank cover, Spark plug, LED lights and bulbs.
So far the total of these mods are are not more than P30,000. Not included the labor cost and other mods I replaced. So my total cost is more or less P40,000
Optional additional mods are koso digital speedometer, underneath with R6 taillight, swing arm and tranny
so mamaw :D
 

jangbest

Moderator
If i have given a chance i will immediately install this on my snipy

1, Racing boy Forged RIMS
2, Vixion kit
3, R6 tail light and fiber craft underneath
4, HID projector light, angel and demon eye
5, R9 exhaust pipe
6, Bridgestone Tire
7, Koso digital speedo
8, Pro arm
 

carltomy

Member
I made a list of all the mods I put in my sniper:
CMS Valve spring, 61mm bore kit, faito clutch spring, faito clutch plate, RB fork stabilizer, nissin disk break assembly, corsa so1 f/r, rear set, Faito lighten valve, hi-speed forged piston, daytona quick throttle, RB bar end, RB throttle grip, decals, fibercraft tire hugger, Fibercraft engine cover, radiator cover, Fibercraft front sprocket cover, RB oil filter cover, TK Sprocket set, TK chain 428, bosch horn, X9 HID, X9 HID projector, BRT CDI, AHM M1 Pipe, RB clutch/break lever, soko side mirror, kaihin 28mm carb, moto suit seat cover, gas tank cover, Spark plug, LED lights and bulbs.
So far the total of these mods are are not more than P30,000. Not included the labor cost and other mods I replaced. So my total cost is more or less P40,000
Optional additional mods are koso digital speedometer, underneath with R6 taillight, swing arm and tranny
Mga idol! :thumbsup:, hehe
 

aaakirasan

Super Veteran
25k lang budget.. poor mods lang ^_^ ( STOCK PISTON )

yypang Camshaft = 3k
5mm Stroke up = 2k
Rextor RCDI = 4.5k
Swallow Tires Rear and Front = 3k
X1r Rearset = 4k
AHM Silver Exhaust = 4k
Spyder Helmet = 3.7k
Mechanic Talent Fee for Stock Set up 800Php

Total = 25,000

Top Speed 145+ Kph _^^
 

Paladin

Super Veteran
If you only know where to buy, to whom to buy from and who will do the job will make you save so much. Most of things are business... And making money for our passion. I saved almost 40% from connection and influence and I give them credit for what I have.
 

Paladin

Super Veteran
Spending so much more than the bikes value or close to it is insignificant IMO. I might spend it on other bike with bigger displacement that will allow me on express ways.
 

raven

Super Veteran
If i have given a chance i will immediately install this on my snipy

1, Racing boy Forged RIMS
2, Vixion kit
3, R6 tail light and fiber craft underneath
4, HID projector light, angel and demon eye
5, R9 exhaust pipe
6, Bridgestone Tire
7, Koso digital speedo
8, Pro arm

VIXION? how about UMA? ;)
 

enjei_blessed

Super Veteran
If i have given a chance i will immediately install this on my snipy

1, Racing boy Forged RIMS
2, Vixion kit
3, R6 tail light and fiber craft underneath
4, HID projector light, angel and demon eye
5, R9 exhaust pipe
6, Bridgestone Tire
7, Koso digital speedo
8, Pro arm
forged rim? hehe 50k nkagad hay kung pnanganak lng akong mayaman hay
 
Top