infinity01
Super Veteran
guys I just wanna ask if shifting gears too early can affect the strenght and performance of the bike?
early shift of gear
- Thread starter infinity01
- Start date
macoolet
Super Veteran
yeah..by everyday use you can know what's the ideal shifting of gears for your bike..you may use a tachometer,or the speedometer or just familiarization of the bike..disadvante of low rpm shifting,the bike won't accelerate and engine may turn off,in tagalog (tumotyope)..just familiarize with the shifting pattern of your bike and you wouldn't also need to look on a tachometer or the speedometer,feel the bike,and let the bike feel you
happy riding
macoolet
Super Veteran
because your bike is not stock like the rest of usyup thats correct.. you will feel that your bike will ask for another shift by your heart without over reving...
Machi09
Super Veteran
your info is incorrect paps... even you inspect my mc.. its fully stock..because your bike is not stock like the rest of us
macoolet
Super Veteran
stock chassis and mags?your info is incorrect paps... even you inspect my mc.. its fully stock..
macoolet
Super Veteran
stock clutch spring and valve spring?
macoolet
Super Veteran
yup it will affect gas consumption...but literally not early shifting,just finding the right timing on shiftinghahaha,ayaw talaga maniwla.ang kulit talga ni macoolet.heheh.
BTT: shifting early on gears,can it save us on gas consumption?(newbie here)
wilson09
Member
(ok lng ba na sinasagad muna bgo mag ship ng gear?)
macoolet
Super Veteran
yeah you can maximize every gear's rpm..because stock CDI has it's limiter,if you feel it's limit then it's time to shift..the downside is it eat's a lot gasoline than it's usual..and the engine is more stressed
JhayBoo
Super Veteran
macoolet
Super Veteran
hahaha try 14/45 sir..hahahahahhow can we do the jumping bike sir? like yours?
can we powershift, every gear?!
zcbitik
Super Veteran
what is powershift by the way sir? ..14/45 stock settings but mags was 120x70 is it good or bad? wow two question in a row ..sorry
BTT : on cage they said that reaching higher gear at the shortest time will save gas.. does it also apply to our bike?
@TS - sir macoolet was right, you can feel it by your self that your bike asking for shift gear without over rev.. you can feel it..pwamiz
PS : on cage the normal shifting was about 2000RPM to 2500RPM ..unless you have lots of money to buy gas then press your gas pedal up the the redline
infinity01
Super Veteran
thank you po mga sir with all your views and opinions
Machi09
Super Veteran
power shift = you will not release the Gas or throttle while shiftingwhat is powershift by the way sir? ..14/45 stock settings but mags was 120x70 is it good or bad? wow two question in a row ..sorry
BTT : on cage they said that reaching higher gear at the shortest time will save goes.. does it also apply to our bike?
@TS - sir macoolet was right, you can feel it by your self that your bike asking for shift gear without over rev.. you can feel it..pwamiz
PS : on cage the normal shifting was about 2000RPM to 2500RPM ..unless you have lots of money to buy gas then press your gas pedal up the the redline