• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

help.. bagal ng sniper ko

sniperyaz

Super Veteran
ronnelmarc_21 said:
@TS
sa stock experience ko ganito ang speed bago ako mag change gear

1st gear = ave 45kph
2nd gear= ave 60 to 65 kph
3rd gear= ave 100kph
4th gear= 115kp(wag kna mag change gear d2 dahil hanggan apat lang tau hehehhe,..IMHO
ganito yung akin eh hehehe,, etong mga gear na to birit na birit na to sa akin may sakay ako nito,, sir baka feeling mo lang gigil na makina pero hindi pa yan kasi sa akin ganyan din feeling ko eh,, eh yung nainis ako sa sobrang bagal binirit ko talaga, kaya yun reach na niya yung sinasabi nila takot kasi ako baka biglang pumutok makina ko eh heheh pero na reach ko yung speed kanina ko tinary sa macapagal yung pumunta ako philpost
 

flict.g

New Member
paps try mo isagad ung takbo ng motor mo bago ka mag chage gear... maramdaman nman un eh... naranasan ko na yan dati.. halos parehas lng tau ng takbo... 4000 km pa lang ung akin... pro na reach ko na ung 115 nung nag byahe kami ng tanay...
 

febe gienel celebria

Super Veteran
@TS
sa stock experience ko ganito ang speed bago ako mag change gear

1st ger = ave 45kph
2nd gear= ave 60 to 65 kph
3rd gear= ave 100kph
4th gear= 115kp(wag kna mag change gear d2 dahil hanggan apat lang tau hehehhe,..IMHO
mine can reach 120km/h at forth gear.. basta yuko na ako..hehe kng wla yuko.. 110km/h only.. all stock snper
 

neilryu04

Super Veteran
Brother i think your Sniper Engine is not exploited at its full capacity. I personally tired on my Sniper AC 06 a 1st gear 40Kph, 2nd gear 70Kph, 3rd gear 110-almost 120 and 4th gear with no throttle play. If you worry about piston, piston ring and block damage? Yamaha Sniper Block and Piston is so toughed.
 

leekills

Super Veteran
wow ang tagal na nito.. sa una lang pla mabagal yung motor.. after break - in yun mala halimaw na.. hehehe.. thanks sa info mga master..
 

febe gienel celebria

Super Veteran
My first tune up is 10k mileage bro. For me its still consider in break in phase
after 10k odo..our sniper is done in break in?? for now at 6k odo.. i do full throttle.. do long distance.. its ok?? i thnk our piston, cylinder will not be damage coz our CDI has a limiter ang Diasil tech. ang cylinder.. so no worry for gasgas cylinder.. WAT DO think?? am i RYT??
 

alvindood

New Member
mine too, when im on the first gear it only took about 10kph then i need to shift to 2nd and it gets around 25kph then my 3rd gear will
play around the speed of 40 to 50kph then max is 80 sa 4th gear.. any suggestion guys? ive never done a tune-up on my sniper
its odo is 12k.. any suggestion guys???
 

JhayBoo

Super Veteran
Hi all members (especially filipinos),

Please be reminded again for the nth time to
speak english in ENGLISH SPEAKING SECTION of the forum.
This is to encourage Worldwide YamahaT135 friends & share passion about our motorcycle.
Looking Forward for Understanding...


Reminder: YOU ARE ON ENGLISH SPEAKING SECTION, Please post in ENGLISH!
​
 
Top