• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Honda CBR 150 Piston on T135

haen

Super Veteran
a CRF150 piston is good, combined with resleeved vixion block, what is not good is the price of the piston :D
 

kid

Super Veteran
iam asking for the size bros... in malaysia its goes only rm98 ..in indonesia about 274,457.90 IDR
 

epin

New Member
Hi,iam using 60mm piston(t135 aftermarket),since i was modified crankshaft pin up 3mm and using 2mm base gasket,i have to cut my piston head 1mm and rebore squesband.Is there any piston fix without lowered the piston head?
 

docgabby

Super Veteran
of course you can use a cbr 150 piston in your sniper. yup it has piston pin 15, you have to change your stock conrod to a mio plus 7mm conrod which is the same length as stock.
 

docgabby

Super Veteran
mio conrod plus 7 with piston pin15 sa sniper crankshaft

3mm offset crank straight pin with plus 7 mio conrod to accomodate piston with 15mm piston pin. there are several conrod brands you could use. there is lhk, hispeed (like this one) or rrgs. if you want a higher conrod to stroke ratio you can use the plus 9mm. ill be changing this to a plus 9. longer conrods have a more mechanical advantage by less piston to cylinder wall wear. or if you have faito 3.5mm crank up or stroke up that uses a oem conrod just change the conrod to the one mentioned above in order to accomodate a piston with pin 15. this crank was made for me by hispeed. the faito crank looks much prettier.
 

Attachments

jiGGer

Super Veteran
a CRF150 piston is good, combined with resleeved vixion block, what is not good is the price of the piston :D
BAKIT SA VIXION,?.
ANO PINAG KAIBA NILA SA OEM BLOCK.?.

AT ANO SA PALAGAY NYO BEST MATERIAL GAMITIN MAG RESLEEVE
 
Top