• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

making DIY LED lighting...

syfull

New Member
Hi again...Just wanna ask if u guys know how to make DIY leds lighting(brake light,blinkers,auxhilary lighting..etc)suitable for our bike..so if u have the CIRCUIT DIAGRAM,HOW TO PICTURES, IDEAS or anything about it,please care to share it with me n to the rest of us..thanx for all your support guys..RIDE TO PEACE N FREEDOM..hehe :D
 

syfull

New Member
mmm ive read the article in the website that the_one gave...but i still cant understand...sorry,honestly im still new to this electrical stuff,mmm btw could i just connect as many LEDs as i want,without using transistors(or whatever they call it..hehe)then plug it to the bike's lighting?...bro trax or anyone could you explain it more precisely...thanx
 

goff_d_p

Super Veteran
no, the reason for the resisters is to resist the full voltage of the 12 volts of current to the light, most LED's are very low volts.
 

syfull

New Member
so i have to use these resistors then?so what kind of resistor do i have to use to supress the 12v current from the batt?from what i understand the more LEDs the more the current would be needed rite?...Damn,i should have concentrate more on my physics class during the ol' days...then i would understand what it all means...hehe..does any of u guys have open any LED lightings(for 12v application)so we could see and learn from it?
 

syfull

New Member
any way, if u line the LED in parallel, do u have to put resistors to every + terminal eg; 20 LEDs=20 resistors?
 

syfull

New Member
thanx master trax...may the force be with you hehe...and does this apply if u put LEDs in SERIES?...from the site,ive seen the instructor had just used one resistor to light up 2 LEDs in (series configuration)...?
 

traxxas-modifier

Super LOLO
Staff member
if you use 2 leds in series, the resistor value will change.
so better follow the instruction given in the website to avoid
burnout ledbulbs.

parallel configuration is better than series..
in series config, if one bulb burnsout, all the other led bulbs in the series
will not light.

unlike in parallel config, if one bulb burnout, only that burnout ledbulb
will be affected, the rest will still work.

syfull... and also with you too :) hehehe
 

syfull

New Member
oooo yeah thanx a million for the info bro...this sure 'lights up'my understanding about LEDs..it sure is useful for me n i hope this will be useful to all of u guys in this site too..well,gonna start making my own LED lighting now...hehehe...before i go bro trax,do u know how to make the on/off switch for all the lightin system for our bike(auxliary&rear)?i ask bcos i find it is relevent to what i got in plan(btw,i hve made a new topic regarding this question,please check it out)..thanx again bro..
 
Top