• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Need help on how to remove parklight lens from its housing..

marvymavs

Veteran
SIr, I badly need your help. Does anybody know how to remove the clear lens of the parklight/signal light assembly on our T135? My bike got flooded and some flood water entered the parklight lenses and when the floor receded, mud and silt were left behind. I wanted to clean it and I do not want any memento of the disaster left in my bike.

Thanks and God bless you all.
 

rudduan

Super Veteran
maybe you should dis-assemble it,by soak it in hot water to melt the glue/sealant/silicone that hold it together then you can clean it,for detail on how to do it,i suggest you pm big poppa
 

jmoquin

Super Veteran
you mean the parklight assembly? just disassemble the front cowling and bwalahh you will see the screws, try to unscrew them... but the headlight, i dont know..
 

marvymavs

Veteran
rudduan said:
maybe you should dis-assemble it,by soak it in hot water to melt the glue/sealant/silicone that hold it together then you can clean it,for detail on how to do it,i suggest you pm big poppa
Thanks rudduan. I'll try doing it. I already tried to pry it out using a flathead screw driver but it doesn't budge. Maybe it is held together by glue or something like that. :cry:
 

marvymavs

Veteran
jmoquin said:
you mean the parklight assembly? just disassemble the front cowling and bwalahh you will see the screws, try to unscrew them... but the headlight, i dont know..
I've already done that sir. The problem is the lenses. I wanted to clean the inside of the parklight/lens assembly. Mud water ruined its luster. My parklights/signal lights are color brown due to dirt.. :cry:
 

marvymavs

Veteran
Up for this thread. More tips and suggestion please.. Still hesitant to remove the lenses without your guides..
 

JUNEX

Super Veteran
you can just remove the lens. there about four locks there just carefully unlock it. thats what i did when my reflectors in my parklight turns into black.
 

marvymavs

Veteran
mething

JUNEX said:
you can just remove the lens. there about four locks there just carefully unlock it. thats what i did when my reflectors in my parklight turns into black.
I tried doing that sir but the thing wont budge. There is a seal or something that held it together.. :cry:
 

sniper_eds

Super Veteran
madali lang tanggalin ang lens bro... use a negative screw driver and yung sa may signal light part ang una mong tang galin yung parang naka clip.... mahirap kasi king unahin mo yung nasa park light...
 

marvymavs

Veteran
I already removed the lenses and cleaned the luminator part of the assembly. I dip it first in hot water for a few seconds until the gluestick like sealant softened then pry out the locks. Cleaned it in warm soapy water and let it dry in the sun and wiped with cotton to avoid misting and finger print marks. Luckily we have a silicone sealant used in our glass window which I applied before locking it in place. Thanks for your help guys. May the good Lord bless you all.
 
Top