• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Newbie Question Post It Here!!! [part V]

Status
Not open for further replies.

z33r0c00l

New Member
ano mgndang viscosity sir pang rat rat..
ang campione 10/60,
yun gamit ko sa lahat ng motor ko. maganda din yung motul Htech 100 4t
yung pang motor ha hindi yung pang kotse, kasi yung iba ang ginagamit yung pang kotse. ang comment ko lang sa motul sobra init ng makina unlike sa campione madali lumamig ang makina mo.
 

Noah501

Super Veteran
mga papa, may alam ba kayong scratch remover.. minor scratch.. at pantanggal ng decals?..​
Try mo VS1 bro. Hindi nakakaalis ng scratch pero nakakadagdag ng shine sa fairings. Kerosene ata pantanggal ng natitirang sticker pagtinanggal mo. IMO ok nmn ang decals ng new sniper models. I dont see any reason to remove it unless magpapadecals ka ng bago. :)
 

jcm1130

Super Veteran
Try mo VS1 bro. Hindi nakakaalis ng scratch pero nakakadagdag ng shine sa fairings. Kerosene ata pantanggal ng natitirang sticker pagtinanggal mo. IMO ok nmn ang decals ng new sniper models. I dont see any reason to remove it unless magpapadecals ka ng bago. :)
thanks bro, 3 yrs na kase MC ko, dami na scratches at medyo faded na sticker.. mahirap na magparepaint ngayon kase rainy seasons na..
 

thon

Super Veteran
mga papa, may alam ba kayong scratch remover.. minor scratch.. at pantanggal ng decals?..​
Gamit ka ng basahan bro ,basain mo ito ng mainit na tubig then idampi mo sa sticker/decals na tatanggalin mo para lumambot ang adhesive . Madali mo lang itong tanggalin bro pag malambot na adhesive ng sticker.;)
 

jcm1130

Super Veteran
Gamit ka ng basahan bro ,basain mo ito ng mainit na tubig then idampi mo sa sticker/decals na tatanggalin mo para lumambot ang adhesive . Madali mo lang itong tanggalin bro pag malambot na adhesive ng sticker.;)
thanks for the tip bro.. :thumbsup:
 

jay.frani

New Member
hi sirs,

i recently got my 2nd hand sniper and im still new to this. i have alot of questions in my head i hope you guys could help me out?

1. What is the advantage of open muffler to a mc? Also, If i put a silencer (rubber) will be there any potential risk?

2. what brand would you recommend for the chain and sprocket replacement? high end and mid range (quality)

3. what can i do to rectify my gas meter issue of not performing accurately?

4. how much will it cost me to change all my clutch lining? and for the clutch spring?

5. Cost of installing locking system to seat / compartment? cost of changing main keyswitch and keys?


for now this will be all. im still learning.. please help me. :)
 

neilryu04

Super Veteran
hi sirs,

i recently got my 2nd hand sniper and im still new to this. i have alot of questions in my head i hope you guys could help me out?

1. What is the advantage of open muffler to a mc? Also, If i put a silencer (rubber) will be there any potential risk?

2. what brand would you recommend for the chain and sprocket replacement? high end and mid range (quality)

For the Chain i would advised a DID HD 428 chain, tried and Tested on high end and mid range... Proper maintenance would be a great help in longevity of the chain life:thumbsup:

Try This link bro. http://www.yamahat135.com/threads/the-best-chain-for-our-beloved-t135.9679/page-2#post-402967
3. what can i do to rectify my gas meter issue of not performing accurately?

4. how much will it cost me to change all my clutch lining? and for the clutch spring?

5. Cost of installing locking system to seat / compartment? cost of changing main keyswitch and keys?


for now this will be all. im still learning.. please help me. :)
 

neilryu04

Super Veteran
tnx po sa reply sir, around how much po for the chain? how about the sprocket sir?
In a Yamaha3's shop DID is the stock brand chain for our Yamaha Sniper. In yamaha3s shop this cost almost 1k, but on other store its around 300 to 4oo peso, Just look for the 2 hologram sticker. there are a lot of counter fake products. About the sprocket one of the best is SSS sprocket and it also has a Chain set (Different colors to choose).
 

jay.frani

New Member
ohhh.. should be more careful then.. plano kasi ni bro magpalitan ung chain and sprocket ko mamaya. sabi nya dbs daw papalit nya. is this ok?
 

macoolet

Super Veteran
hi sirs,

i recently got my 2nd hand sniper and im still new to this. i have alot of questions in my head i hope you guys could help me out?

1. What is the advantage of open muffler to a mc? Also, If i put a silencer (rubber) will be there any potential risk? better looks and performance because it gives the engine a slightly bigger breathing space but need to adjust the carb settings,for the rubber silencer,if you're inside the compound then it's ok to put it then just remove it upon leaving the compound's gate haha

2. what brand would you recommend for the chain and sprocket replacement? high end and mid range (quality) SSS and DID 428H silver color

3. what can i do to rectify my gas meter issue of not performing accurately? no idea because even mine is not working..replacing it is my solution right now

4. how much will it cost me to change all my clutch lining? and for the clutch spring? what model is your bike?1 GENUINE lining costs around 220 to 250 pesos,just do the math if it's the 4 lining type or 5 lining type,and check also the pressure plates if it's worn out already,you'll need to replace it also for better use of the new linings..the clutch spring,if you're referring to the aftermarket,it costs around 500 to 700 pesos for the 4 pcs...or the original,i have no idea..but if you're planning to replace it,get CRG brand,been using it in my 3 bikes,around 500 to 600 pesos

5. Cost of installing locking system to seat / compartment? cost of changing main keyswitch and keys? 1200-1500 for solcar ignition keys, lock system for seat 400 to 800..


HTH

for now this will be all. im still learning.. please help me. :)
 
Status
Not open for further replies.
Top