• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Newbie Questions....Post it here.

Status
Not open for further replies.

BasTarD

Super Veteran
papa, i think mas ok ang denso iridium iu24 or 23 sa snipee natin but kung bago pa snipee mo (la pang 2-3k odo at wala pang prob sa engine), gamitin mo muna yung stock sp nya paps... :)
 

elyouch

Super Veteran
highlander said:
mga master my masusuggest po b kyo na magandang combi ng clearance ng valve???pinoproblema nmin po tlga ung ingay ng motor po nmin...2 na po kmi sniper ganun problem
slmat po...
may engine mods ka na ba??
ung stock valve clearance ng intake and exhaust di ba nag work sa motor mo?
 

YeshuaBL

Veteran
@bastard & to anybody-my odo is running to 6k.what u mean prob sa engine?makahelp b ang iridium to lessen the engine noise?my frend's snipee's odo is 3.5k,the engine has bothering noise but mine is worse,sounds like the piston is lightly hammering something(THOK THOK sound while on idle,even when running the noise persist,as i push faster up to 120 kph (max of my mc) the thok just go with the speed. on idle,slow thok2,as i rev so does the thok thok.my latest speed test wont reach 110kph.nilagpasan pa ko ng xrm(shame)..fyi: i weigh 85kg..PS:so far,the only good thing the norkis mechs here ever done to my mc is change the oil annnndd some brake & clutch adjustments..ow wait,one of the mechs advised me that the 1st valve adjustment (tune up ba yun?) shld be done when i reached 30k odo reading.?????..whew,tynx 4 reading.
 

BasTarD

Super Veteran
papsi...maraming pang diagnostics yan paps, hirap kasi mag guess work eh, hintay tayo kay super traxx sa kanyang opinion, although matagal na ko nag tormuts, bago pa lang ako sa snipee ko at so far sa mga forums regarding t135, common talaga ang engine sound, kumbaga trademark na sa snipee yan paps, regarding your bikes declining performance, some factors needs to be addressed like sa basics, tune ups, kailan ba sched ng tune up mo, and baka palit palit ka ng mekaniko...but first try muna palit ka ng engine oil paps, at pag meron pa din knocking, try mo patingin at pa chek valves mo if tama ang measureents, pag meron parin, timing chain or sa clutch, pag meron pa din buksan makina, its the only way...kailangan kasi senses mo gamitin eh not just hearing, kailangan din makita kung bakit ganun...best of all, marami tayo mga experts dito like sir wingman, papa jeff aka "da wan"...andyan din si senor pekz... :shock: ...haen, sir traxxx at marami pang iba...lets just wait for thier opinions too regarding your problem...but first...try muna yung mga basics sa itaas.... :D aprub? :D
 

BasTarD

Super Veteran
30k???wow...tamad mga mekaniko nyo dyan paps...chek mo sa tune up manual (red book)...parang evry 2k yun paps...have it cheked (valves) before damage is done... ;)
 

YeshuaBL

Veteran
tnx sa mga tips..

1st step: look for sniper expert mech dito sa aming lungsod.
2nd step: keep on browsinggggggggggg sa t135.
3rd " : ipon mode.pang upgrade/.

tnx agen bro..till my nxt newbie query.gud day 4 now.
 

highlander

Veteran
elyouch said:
highlander said:
mga master my masusuggest po b kyo na magandang combi ng clearance ng valve???pinoproblema nmin po tlga ung ingay ng motor po nmin...2 na po kmi sniper ganun problem
slmat po...
may engine mods ka na ba??
ung stock valve clearance ng intake and exhaust di ba nag work sa motor mo?
10 13 po ginamit nmin ..clutch spring clutch lining cdi en polish lng mods ng motor...pag ngpalit ka ng valve ba dapat po ba na ung tapet screw e replace din po b???
 

elyouch

Super Veteran
highlander said:
10 13 po ginamit nmin ..clutch spring clutch lining cdi en polish lng mods ng motor...pag ngpalit ka ng valve ba dapat po ba na ung tapet screw e replace din po b???
stock settings
valve clearance (cold)
intake- 0.10-0.14mm
exhaust- 0.16-0.20mm

valve stem to valve guide clearance
intake- 0.0010- 0.037mm
exhaust- 0.0025- 0.052mm


pag nag palit ka ng Valve palit ka din valve guide and valve stem seal
 

boldstardex

Moderator
Staff member
mga paps, ask ko lng po, alin sa tatlo ang mas mabigat stock swing arm,tdr swing arm or yung inverted swing arm (yung nasa snipee ni moderator trax)?
 

YeshuaBL

Veteran
elo agen..14 42 sprocket combi,castrol advans premium 20w40..is it ok for daily city driving?all stock mc..tnx.6k odo .
 

kalipo

Super Veteran
pEkz said:
rearset ba kamo?? ehem!
Sir pekz.. anu rearset meron k? at mgkano?? plan ko bumili by the end of this month.. hehehe.. 1st mod ko to sa mot mot ko.. salamat sa mga advice ng mga tga bulacan..
 

kalipo

Super Veteran
elyouch said:
YeshuaBL said:
elo agen..14 42 sprocket combi,castrol advans premium 20w40..is it ok for daily city driving?all stock mc..tnx.6k odo .
ayos yan sir mabilis acceleration nyo.
balak ko din mg palit ng ganyang combi.. pero try ko muna.. bili muna ko mumurahing sprocket..
 
Status
Not open for further replies.
Top