OFF TOPIC DITO!!!!! Nagugulo ibang mga thread. THANKS!!!

[ronnelmarc_21]

paps wala ako nun ehhh,..tingnan ko kung ano ano ang mga madala ko paps,...

 

[the_one]

paps wala ako nun ehhh,..tingnan ko kung ano ano ang mga madala ko paps,...

pwede p nman cguro un. need lng wire socket..

 

[ronnelmarc_21]

[quote="ronnelmarc_21":1g6ykzqt]paps wala ako nun ehhh,..tingnan ko kung ano ano ang mga madala ko paps,...

pwede p nman cguro un. need lng wire socket..[/quote:1g6ykzqt]

pwede pa yun paps basta ang relay ay OK pa,..ayusin nlang,..

naka HID knb paps??

 

[the_one]

[quote="the_one":1p4cixb2][quote="ronnelmarc_21":1p4cixb2]paps wala ako nun ehhh,..tingnan ko kung ano ano ang mga madala ko paps,...

pwede p nman cguro un. need lng wire socket..[/quote:1p4cixb2]

pwede pa yun paps basta ang relay ay OK pa,..ayusin nlang,..

naka HID knb paps??[/quote:1p4cixb2]
ok p nman ung relay ng stebel ko. ung isang mata ko nka HID & may sariling relay din tpos nkarekta n s batt. bali gus2 kong mang yari ngayn lagyan ng switch ung stock n headlight ko pra s umaga nka off lng sya. bali ngayn kc nka stationary sya bukas palagi. ang may switch lng sakin lahat ng park light ko..

 

[ronnelmarc_21]

[quote="ronnelmarc_21":2ofko6fa][quote="the_one":2ofko6fa][quote="ronnelmarc_21":2ofko6fa]paps wala ako nun ehhh,..tingnan ko kung ano ano ang mga madala ko paps,...

pwede p nman cguro un. need lng wire socket..[/quote:2ofko6fa]

pwede pa yun paps basta ang relay ay OK pa,..ayusin nlang,..

naka HID knb paps??[/quote:2ofko6fa]
ok p nman ung relay ng stebel ko. ung isang mata ko nka HID & may sariling relay din tpos nkarekta n s batt. bali gus2 kong mang yari ngayn lagyan ng switch ung stock n headlight ko pra s umaga nka off lng sya. bali ngayn kc nka stationary sya bukas palagi. ang may switch lng sakin lahat ng park light ko..[/quote:2ofko6fa]

ok ok good info,..i-rede ko muna ang rectifier paps na alternative natin,,,at dala nlang din me switch kung may spare pa ako d2,..

 

[Sidro]

[quote="ronnelmarc_21":2pvl14q7][quote="the_one":2pvl14q7][quote="ronnelmarc_21":2pvl14q7]ok cge paps mag undertime lang muna ako mamaya hehehe,..excited ako manood sa trackday yahooo

paps bka gus2 mong sumalang din P350 lng nman..
paps isa p bka meron kng ganito.. s inis ko sinira ko ung relay ng dyesabel horn ko eh..

[/quote:2pvl14q7]

watch mode lang muna ako paps,..d pa pwede ang gulong ko doon,..on the making pa ang mags ko w/ new tire,..hehe[/quote:2pvl14q7]
paps may mkukunan kba ng female n relay (check mo ung relay ko s taas)??[/quote:2pvl14q7]

paps kung yung sa ryt side na pics mo. male socket. kung ala mahanap may available yan male and female, iba nga lang yung orientaion ng pins..

 

[the_one]

[quote="ronnelmarc_21"5y9d4rl][quote="the_one"5y9d4rl][quote="ronnelmarc_21"5y9d4rl]ok cge paps mag undertime lang muna ako mamaya hehehe,..excited ako manood sa trackday yahooo

paps bka gus2 mong sumalang din P350 lng nman..
paps isa p bka meron kng ganito.. s inis ko sinira ko ung relay ng dyesabel horn ko eh..

watch mode lang muna ako paps,..d pa pwede ang gulong ko doon,..on the making pa ang mags ko w/ new tire,..hehe[/quote5y9d4rl]
paps may mkukunan kba ng female n relay (check mo ung relay ko s taas)??[/quote5y9d4rl]

paps kung yung sa ryt side na pics mo. male socket. kung ala mahanap may available yan male and female, iba nga lang yung orientaion ng pins..[/quote5y9d4rl]
female yan pareho paps binaliktad ko lng. ung may lawit n relay nsakin parin paps & i guess working parin. balaha n si AGENT RONNEL mmya s mc ko

 

[Sidro]

aw ah.. hehehe.. sana magawa na yan paps.. And correction "Master ronnel". hehehe,, thanks sa PM.. sana ako mablowjob Este!!! ma blow out din ni papa pekz/.... peaces!!

 

[ronnelmarc_21]

aw ah.. hehehe.. sana magawa na yan paps.. And correction "Master ronnel". hehehe,, thanks sa PM.. sana ako mablowjob Este!!! ma blow out din ni papa pekz/.... peaces!!

hahaha papa sidro OT ka hehehe,..hindi ako MASTER,...

operahan nmin ni the_one x1r nya hahaha..sama kna kaya paps,..

 

[the_one]

aw ah.. hehehe.. sana magawa na yan paps.. And correction "Master ronnel". hehehe,, thanks sa PM.. sana ako mablowjob Este!!! ma blow out din ni papa pekz/.... peaces!!

hahaha papa sidro OT ka hehehe,..hindi ako MASTER,...

operahan nmin ni the_one x1r nya hahaha..sama kna kaya paps,..

isa png tanong, ilang amp n fuse b dpat ang gamitin s HID??

 

[pEkz]

10amp lang papa jeff!

 

[ronnelmarc_21]

[quote="ronnelmarc_21":2034ch2n]

aw ah.. hehehe.. sana magawa na yan paps.. And correction "Master ronnel". hehehe,, thanks sa PM.. sana ako mablowjob Este!!! ma blow out din ni papa pekz/.... peaces!!

hahaha papa sidro OT ka hehehe,..hindi ako MASTER,...

operahan nmin ni the_one x1r nya hahaha..sama kna kaya paps,..

isa png tanong, ilang amp n fuse b dpat ang gamitin s HID??[/quote:2034ch2n]

10A to 15A paps ok lang yun,..hindi rin maganda na masyadong,,pag nag overloaded na kasi battery mo hindi bibigay ang fuse mo,...ok na yang range paps para sa protection,..usually ang HID natin it will consume approximately 9A pagka "ON" natin and will go down to 3A after 10sec approximately at steady na ang ilaw,.

kapag ON/OFF ang HID mo madalas hindi ibig sabihin nakatipid ka ng kuryente,,much better steady ON mo na yan,,kc mas malakas ang kuryente na kailangan sa una to "ARC" at mag ilaw ang bulb.

 

[Sidro]

Amp rating for fuse is actual ampere ratings ng HID mo or pwede ka mag plus 5. hehhe,
@pekz paps libre nman dyan. hehehe
@ronnel,, 10pm out ko ngaun or baka 3am kung mamalasin. hehhe,, ah! kahit ano sabihin mo kapag may alam sa MC dito forum master na tawag ko. hehehe

 

[ronnelmarc_21]

electric arc is an electrical breakdown of a gas which produces an ongoing plasma discharge, resulting from a current flowing through normally nonconductive media such as air.

 

[lockon]

what's happening??

 

[the_one]

electro magnetic achuchuchu!!!

 

[Rjloks]

@peks may txt ako. w8 mo lang, ehhehehe

 

[pEkz]

ok

 

[Sidro]

electric arc is an electrical breakdown of a gas which produces an ongoing plasma discharge, resulting from a current flowing through normally nonconductive media such as air.

Waaaa, hindi lang master, professor pa.. hehehe,,
dugtong: thats why most of semi con companies uses Ionizer blower ESD gadgets inside with in production lines to convert +/- air by eliminating negatively and positively charges on air that can contribute to contamination and defects on their products. bow!.. hehehe nosebleed na ako..

 

[ronnelmarc_21]

electric arc is an electrical breakdown of a gas which produces an ongoing plasma discharge, resulting from a current flowing through normally nonconductive media such as air.

Waaaa, hindi lang master, professor pa.. hehehe,,
dugtong: thats why most of semi con companies uses Ionizer blower ESD gadgets inside with in production lines to convert +/- air by eliminating negatively and positively charges on air that can contribute to contamination and defects on their products. bow!.. hehehe nosebleed na ako..

ayun ohhh scientist hehehe