• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Over voltage switch

ronnelmarc_21

Super Veteran
For DIYers here is one of the circuit I designed to protect our MCs battery from over charging for those MCs have this problem.,.

Features:
1. inexpensive and small number of components.
2. Automatic shutdown your fast charger circuit if the voltage reaches above 14 volts.

Note: If your fast charger uses 12V relay,you can use this one.

Function:
1. This circuit will have an Vout (output voltage) of 0V(zero) if your battery voltage is below 14 volts.
2. This circuit will have an Vout (output voltage) of 12V if your battery voltage is above 14 volts.
pls observe the NC(normally close) and NO(normally open of relays.

 

the_one

Super Veteran
ronnelmarc_21 said:
For DIYers here is one of the circuit I designed to protect our MCs battery from over charging for those MCs have this problem.,.

Features:
1. inexpensive and small number of components.
2. Automatic shutdown your fast charger circuit if the voltage reaches above 14 volts.

Note: If your fast charger uses 12V relay,you can use this one.

Function:
1. This circuit will have an Vout (output voltage) of 0V(zero) if your battery voltage is below 14 volts.
2. This circuit will have an Vout (output voltage) of 12V if your battery voltage is above 14 volts.
pls observe the NC(normally close) and NO(normally open of relays.

ok to paps lalo n s mga npupundihan ng mga LED's jan that cause our mc's to overcharge..
 

ronnelmarc_21

Super Veteran
the_one said:
[quote="ronnelmarc_21":1wir2bvu]For DIYers here is one of the circuit I designed to protect our MCs battery from over charging for those MCs have this problem.,.

Features:
1. inexpensive and small number of components.
2. Automatic shutdown your fast charger circuit if the voltage reaches above 14 volts.

Note: If your fast charger uses 12V relay,you can use this one.

Function:
1. This circuit will have an Vout (output voltage) of 0V(zero) if your battery voltage is below 14 volts.
2. This circuit will have an Vout (output voltage) of 12V if your battery voltage is above 14 volts.
pls observe the NC(normally close) and NO(normally open of relays.

ok to paps lalo n s mga npupundihan ng mga LED's jan that cause our mc's to overcharge..[/quote:1wir2bvu]

pwede to paps,..yung existing kc na fast charger ngayong ang feature,..
fast charger is activated if HID is ON,..pwede i-add din e2 don,..
 

ronnelmarc_21

Super Veteran
deadhungry said:
wala ako nakikitang nc at no haha
u cant see NC and NO there bro,..use the vout to drive your relay,..vout is changing 0V or 12 volts depending on your battery voltage,..check first the details on my post before laugh
 

Sidro

Super Veteran
ronnelmarc_21 said:
deadhungry said:
wala ako nakikitang nc at no haha
u cant see NC and NO there bro,..use the vout to drive your relay,..vout is changing 0V or 12 volts depending on your battery voltage,..check first the details on my post before laugh
oi, papa ronnel bigyan kita zagu para lamig. hehehe,, paps pwede na ba yung multi relay dito?. I mean yung 5 lines na relay hindi ko alam tamang term para dun.hehehe
Pa OT: 1st choice;Paps balak ko mag palit ng LED sa aking park lights applicable ba sa akin tong design mo? Second choice; kung hindi pwede to, balak ko edirect yung line ng park lights ko sa battery, kelangan ko ba mag lagay ng wire from park light to battery? tnx
tsaka bka pede pa email mo sa akin yung diagram mo, hindi ko kasi ma view. hehehe,, Thanks ulit
dennis.mahinay@qtrade.com.ph
 
Top