question about Bore Up Kits

[snider150]

inquire ko lng kung ok ba ang peerformance ng cmr bore kits?? good for long drive and daily use?? im not into racing use poh.. i heard mas ok daw ang vixion kit. but d kaya ng budget..
and also if i change my stock cams is it ok lng ba to change it to stage 2 cam shaft??/

any comment and violent reaction.. ehhe will very much appreciated..

 

[jamskie]

pm mo si papa thopiang..certified CMR user sya

 

[thopiang]

bakit ako? hahahaha

baka sumabog yan kasalanan ko pa hehehe

cmr 61mm user here for over a year now, had several long rides and daily use . . as in daily kasi motor lang natirang sasakyan ko

kung cum paguusapan este cam hehehe, puede kahit yung may pinaka high lift

 

[jamskie]

ayun, nag testimonial na si papa thopiang.hehe

 

[oldskul_MAFIA]

idol papa piang..^)^

 

[snider150]

tnx po sa mga feed back.. sir thop ilang yrs nyo na gamit ung cmr nyo po?? d ba nag uusok ng puti yan agad?? tnx mga idol bago lng ako sa snipei eh..

 

[snider150]

and also if i use po cmr 61mm bore kit and stge 2 cams. anu pong ideal size ng carb for daily use and long drive.. and sprocket combi po..

 

[thopiang]

more than a year na cmr ko bro snider

eto starting set-up ko

61mm cmr
pan-asean cam 6.5 lift
30mm carb with accelarator pump wabron
jad racing pipe customized for 61mm
15/42 sprockets

usok - itim kasi overfed, walang puting usok dapat

 

[snider150]

gnda pla ng set nyo sir..

sir thop if u dnt mind po.. mag kanu at saan nyo sir nabili ung mga set up nyo..??

61mm cmr =?
pan-asean cam 6.5 lift =?
30mm carb with accelarator pump wabron
jad racing pipe customized for 61mm=?
15/42 sprockets=?

usok - itim kasi overfed, walang puting usok dapat

 

[yanski]

@toipang stock valve ka lang?

 

[thopiang]

Re:

61mm cmr = 4.5k ata including shipping cost,marami nagbebenta dito sa site
pan-asean cam 6.5 lift = 6k, isa lang ang source nyan, dito lang sa site
30mm carb with accelarator pump wabron - 3.5k galing kay master job
jad racing pipe customized for 61mm= 5k from jad racing
15/42 sprockets= stock front, 42 teeth pang rs

 

[thopiang]

@yanski

yes sir stock head and valves

 

[kikaipitoy]

Re:

61mm cmr = 4.5k ata including shipping cost,marami nagbebenta dito sa site
pan-asean cam 6.5 lift = 6k, isa lang ang source nyan, dito lang sa site
30mm carb with accelarator pump wabron - 3.5k galing kay master job
jad racing pipe customized for 61mm= 5k from jad racing
15/42 sprockets= stock front, 42 teeth pang rs

sir ano topspeed mo?

 

[thopiang]

@kakaipitoy - sa koso 135kph pero last ride namin alam ko niyukuan ako ng yzf 250cc hahaha nasa tail ko lang hehehehe. di man accurate speedo ko kasi yung mga kasama namin na nasa 140kph speedo, kaya ko sila daanan na nasa 120kph lang reading sa speedo ko

 

[kikaipitoy]

@kakaipitoy - sa koso 135kph pero last ride namin alam ko niyukuan ako ng yzf 250cc hahaha nasa tail ko lang hehehehe. di man accurate speedo ko kasi yung mga kasama namin na nasa 140kph speedo, kaya ko sila daanan na nasa 120kph lang reading sa speedo ko

mamaw motmot mo sir he he he tnx sa info

 

[traxxas-modifier]

hi all

Speak english please. thread on ENGLISH AREA

thanks

 

[thopiang]

thanks for the reminder sir job

 

[(sukiyama)]

Re:

61mm cmr = 4.5k ata including shipping cost,marami nagbebenta dito sa site
pan-asean cam 6.5 lift = 6k, isa lang ang source nyan, dito lang sa site
30mm carb with accelarator pump wabron - 3.5k galing kay master job
jad racing pipe customized for 61mm= 5k from jad racing
15/42 sprockets= stock front, 42 teeth pang rs

bro, can you please post some pics of your carburetor. thanks

 

[thopiang]

sir sukiyama, cant find pics of my carb, but you can check my thread under the t135 riders blog and showbike area, i think i had posted some pics there

 

[technician]

Bro lots of us here got CMR bore problems. We switched to SHARK. Tested for 2000km high RPM