question about quick throttle and tires..

[hearthrob16]

hahaha..meron ka din pala sa japan! dami talaga source ni fafa dorae! ang sarap kaibiganin! wahahahah! :mrgreen: :mrgreen: :mrgreen: :mrgreen:

 

[doraemondizon]

hahaha..meron ka din pala sa japan! dami talaga source ni fafa dorae! ang sarap kaibiganin! wahahahah! :mrgreen: :mrgreen: :mrgreen: :mrgreen:

mamamasyal ka kasi..
wag puro j2cab lang.. 8)

 

[hearthrob16]

ayaw ko na kay j2cab for some reasons..hehehe..

 

[eboitot]

parang egg hunt lang ah..

baka ibang itlog mahanap ha... :lol:

 

[doraemondizon]

ayaw ko na kay j2cab for some reasons..hehehe..

next time ikot ikot muna paps..

 

[eboitot]

hahahahahaha

yabang..


gawang kalbo na eh..


:lol:

 

[raider125jeigh]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

 

[doraemondizon]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

 

[hearthrob16]

thanks fafa RJ..mwah!

 

[hearthrob16]

hmmmmm...looking for AHM pipe!!!!! pm me for the price! :twisted:

 

[doraemondizon]

hmmmmm...looking for AHM pipe!!!!! pm me for the price! :twisted:

wala pang dating ulit nyan..
dati kasi yung nag paparating ng yy pang nag parating din nyan..
ewan ko ngayon kung bakit puro yy pang na lang ang pinararating..

 

[raider125jeigh]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

 

[doraemondizon]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

dapat from the start kasi isa lang kalikot ng motor..
kung engine kay juan,kay juan lang palagi..
kung electrical kay jose kay jose lang palagi..
mahirap din yung papalit palit ng mekaniko..
minsan mahirap din mag trace ng mga naging problema..

 

[hearthrob16]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

yah! hindi ko naman pangkakarera motor ko..gusto ko lang maangas sa kalsada..let's say head turner yung MC,syempre yung iba mayayabangan,kaya kakarerahin ka..gusto ko kapag piniga ko na yung throttle wala na makakahabol sakin...kanya kanya lang trip at yabang..hehehe..pero fafa RJ125,yung hulaan mo magkano singil ni chief sakin..heheheh...

 

[raider125jeigh]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

dapat from the start kasi isa lang kalikot ng motor..
kung engine kay juan,kay juan lang palagi..
kung electrical kay jose kay jose lang palagi..
mahirap din yung papalit palit ng mekaniko..
minsan mahirap din mag trace ng mga naging problema..

hehehe... si raymond ba o si tsip gagawa???

 

[hearthrob16]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

dapat from the start kasi isa lang kalikot ng motor..
kung engine kay juan,kay juan lang palagi..
kung electrical kay jose kay jose lang palagi..
mahirap din yung papalit palit ng mekaniko..
minsan mahirap din mag trace ng mga naging problema..

kaya nga gusto ko isang mekaniko nalang..sino kya? chief? bong? ompong? rossi??? hehehe

 

[hearthrob16]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

dapat from the start kasi isa lang kalikot ng motor..
kung engine kay juan,kay juan lang palagi..
kung electrical kay jose kay jose lang palagi..
mahirap din yung papalit palit ng mekaniko..
minsan mahirap din mag trace ng mga naging problema..

hehehe... si raymond ba o si tsip gagawa???

sinong raymond papa?

 

[doraemondizon]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

yah! hindi ko naman pangkakarera motor ko..gusto ko lang maangas sa kalsada..let's say head turner yung MC,syempre yung iba mayayabangan,kaya kakarerahin ka..gusto ko kapag piniga ko na yung throttle wala na makakahabol sakin...kanya kanya lang trip at yabang..hehehe..pero fafa RJ125,yung hulaan mo magkano singil ni chief sakin..heheheh...

konting magic mods lang yan..

 

[eboitot]

uy may magpapalit ng gulong...hahaha...

2500 bnew.. 2k nlng hyperband na...hehehe.. pero gnada talaga battlax...

90 x 80 ka cali.. front an rear.. talagang pangresing resing ka na..

OT
may advised lng ako sayo pre.. kung madami pinapapalitan... think of it first... parehas lng naman un eh.. like rextor and brt.. still same cdi.. and UMA sa Keihin... sila na bahala magtono kung anu ung items mo hehehe..

depende rin papa kung san mo gagamitin..
like ordinary rextor over brt..
mas pang short track ang rextor rather than brt..
yy pang long,short,ahm,4n..
shorty pang short tracks rather than the longy and ahm..
lalo na sa 4n..
pang duluhan talaga..

naiinitindihan ko papa.. yah lng hindi naman kasi magdrag nor circuit si CALI..want nya lang malakas motor.. but not so powerful...na pang drag na..

pogi at mabilis ika nga hehehe..

kasi napapamhal na si pogi...
sa labor 15k??? ampf!!!!
i know someone n nagpagawa...baklas lahat palit gearing.. vixion and etc...7.5k hehehe.. 9k pero natawaran.. just being concern..

its for everyone..

dapat from the start kasi isa lang kalikot ng motor..
kung engine kay juan,kay juan lang palagi..
kung electrical kay jose kay jose lang palagi..
mahirap din yung papalit palit ng mekaniko..
minsan mahirap din mag trace ng mga naging problema..

hehehe... si raymond ba o si tsip gagawa???

pag si jaime gumawa, eh isangla mo nalang din yung motor sakanya.. :lol:

 

[hearthrob16]

yung sakin kasi may password...hehehe open sesame!