mhokz
Veteran
Ako rin sir pa pm... TIA!
REAR DISK CONVERTION!!!
- Thread starter corgph666
- Start date
wingman44
Super Veteran
wingman44
Super Veteran
depends on the kind of conversion done on your rear disc brake.
if you have shaved the inner part of your hub or rear wheel, you can no longer use it to revert back to drum brake. you will have to replace the hub/wheel.
this is because the brake panel will no longer fit snugly into the wheel if the wheel has been shaved.
but if you have used a fabricated plunge without shaving the wheel, then there shouldn't be any problem going back to drum brake.
if you have shaved the inner part of your hub or rear wheel, you can no longer use it to revert back to drum brake. you will have to replace the hub/wheel.
this is because the brake panel will no longer fit snugly into the wheel if the wheel has been shaved.
but if you have used a fabricated plunge without shaving the wheel, then there shouldn't be any problem going back to drum brake.
nyr0
Super Veteran
copy that sir! which do you recommend or prefer rather? thanks for the info! ride safe!!!
wingman44
Super Veteran
yung sa sniper ko gumamit ako ng HDIII hub kasi alloy ito at magaang. mas mabigat kasi yung fabricated plunge na ginagawa sa machine shop. isa pa, ayoko ng may mga welded parts sa conversion.
kaya nga lang, hindi na maibabalik sa drum brake unless palitan ko ang mags ko
nyr0
Super Veteran
ok sir, so need tlga pagisipan mbuti pagpa2convert.. mgsolicit na rin sir ng konting advice sulitin q na itong chance.. mgstart pa lang kc aq sa mods sa mc ko sir mukhang pang-finale na ung RS and RD conversion..ipon mode muna, any ideas for minor mods para sa mc ko sir.. thanks!
attiado
Veteran
Pap's Im a newbie here,
I need your some advise...
Ihave a rear disc conversion already at my sniper and i feel sorry for it..too bad now ko lng nabasa about sa forum na toh..hindi ako nasatisfy sa convertion sa rear brake ko...minadali talaga yata paggawa eh..nagbubutas ba tlaga yun sa mags to fixed the hub on mags?Tapos tagusan lang yun turnilyo from mags to disc plate..medyo align nman sa caliper kaya lang masasabi kong hindi pulido..REGRETS on my part..
anu ba magandang remedyo para d2?..HELP mga paps!!!
I need your some advise...
Ihave a rear disc conversion already at my sniper and i feel sorry for it..too bad now ko lng nabasa about sa forum na toh..hindi ako nasatisfy sa convertion sa rear brake ko...minadali talaga yata paggawa eh..nagbubutas ba tlaga yun sa mags to fixed the hub on mags?Tapos tagusan lang yun turnilyo from mags to disc plate..medyo align nman sa caliper kaya lang masasabi kong hindi pulido..REGRETS on my part..
anu ba magandang remedyo para d2?..HELP mga paps!!!
corgph666
Veteran
@attiado - same here bro....my snipy is already converted into rear disk, just today..... I just notice that it was not properly aligned, i don't know, if it is the caliper or the rotor disk.... just like ocho...ocho.... hayzzz... big disappointment for me... b'coz, i thought the shop that was recommended to me is 100% guaranteed.. "kilala pa naman ung shop na un sa may cubao "new york st." Sana naman pag balik ko sa this coming monday, eh magawan ng paraan..... maganda naman usapan namin before sa FB eh... sabi nga 3.5k daw all na un package eh... pero 4.5k umabot.... big money... for me!!! "MAS MALAKAS PA UNG DRUM BREAK"
sana mairaise tong concern ko...... thanks god bless!!!!
sana mairaise tong concern ko...... thanks god bless!!!!
attiado
Veteran
pap's nag undergo ba mags mo sa machineshop?baka hindi maganda pagkakatanim ng disc or yun hub..ganu ktagal ginawa yun convertion mo?
kapg hindi yan nag undergo ng machineshop may pag asa pa yan..dalin mo sa racing plus sa taytay..maganda magconvert dun.. taga saan kba bro?
corgph666
Veteran
pap'z binutasan ung stock magz... barena!! salpak hub w/ rotor... halfday ginawa... ibabalik ko muna sa kanila... may warranty naman hehehe....hindi lang talaga nacheck mabuti.... saka ok nanaman... naka usap ko na ung rep. ng shop.... First time ko kasi mag pagawa dun eh.. naimpress ako sa mga ginawa nila...at may nag recommend sakin na tropa... mga astig naman eh....kaya dun ako nag pagawa.... taga mandaluyong ako pap's....
Thanks!! God Bless...
"Sorry for the confusion, I didn't mean to bad mouth their business" just a customer!!
Thanks!! God Bless...
"Sorry for the confusion, I didn't mean to bad mouth their business" just a customer!!
attiado
Veteran
oK..mabuti kung ganun..
anung hindi n check mabuti? panu ni-repair?
corgph666
Veteran
pag kainstall... pinaikot ung gulong.. aus na!!! hehehe hindi ko natest drive after... at check ulit kung may nabago sa alignment....medyo pagod narin kasi ung gumawa.. at umuulan pa... that time kasi inaaus ung tapat nila kaya ang hirap gumalaw... ok lang naman..... Then sa bahay ko nalang nakita nung naka stand na.... medyo gumegewang ung caliper pag inikot ung gulong... gumagalaw....ndi naman umaalog fixed naman.. kaso gumegewang kadaikot.. sumasabay saikot ng rotor na ndi pantay.... hehehe tapos napansin ko parang ung rotor disk ang may prob.. hindi patay ocho ocho....... sa monday ko pa maibabalik eh.... maaus naman cguro ito... thanks bro!!!
attiado
Veteran
Think positive paps..your snipey will be in good condition sooner..hehehe...
YUng sa akin tinira nmin ng tropa ko...ayun naayos nman nmin..
Pero tingin ko the best yung conversion kapag nag undergo tlaga ng machine shop plus malupit na mekaniko plus racing boy rearbrake kit..
pogi...hehehe
Goodluck sa monday ah..
Ride safe always!
YUng sa akin tinira nmin ng tropa ko...ayun naayos nman nmin..
Pero tingin ko the best yung conversion kapag nag undergo tlaga ng machine shop plus malupit na mekaniko plus racing boy rearbrake kit..
pogi...hehehe
Goodluck sa monday ah..
Ride safe always!
attiado
Veteran
musta na paps?
=X-II-AIRFORCE-ONE-II-X=
Veteran
paps sa mga master jan, bumili ako ng mags rb 522, and rear convertion kit, problema yung caliper bumabanga sa mags kc fabricated lng yung hub na ginamit maxado lapat sa mags yung hub. ano pwedeng hub na mag fifit sa rb mags na medyo nka usli ung disc? hd3 ba?
john_carlo
Super Veteran
kung gusto mo umangat lagay ka na lang ng washer sa pagitan ng hub at disc para umangat
=X-II-AIRFORCE-ONE-II-X=
Veteran
spacer? stable ba yun? bka maputol yung bolt
john_carlo
Super Veteran
yung dulo ba ng caliper tumatama bawasan mo na lang yun dulo tapos lagay ka ng washer na sakto lang yung butas sa turnilyuhan ng rotor, stainless na washer gamitin mo tapos lihahin mo muna yun washer para magparepareho ang kapal.. yung hub mo ba ay diresto ang turnilyo ng rotor sa mags...
=X-II-AIRFORCE-ONE-II-X=
Veteran
yung hub na nabili ko flat maxado design sa stock mags. nag rb mags na kc ako kaya dko na pwd gamitin yung dating hub kc dapat yung usli ng konte yung paglalagyan ng disc para d tumama yung caliper sa mags. prob ko lng kung anong hub ang bibilhin