• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

SNIPER 150 and CBR 150

traxxas-modifier

Super LOLO
Staff member
pssst english speaking area :D

i agree cbr150 is really fast in stock form, hands off :D
im just trying to see if an underpowered specs can match with cbr150.
and yes so far it can match...

again the purpose of the video is not to boast who has the fastest bike.
its for EDUCATIONAL PURPOSES ONLY for benefit of all motorcycle enthusiasts.


the sprocket on 120x70 tire is 16/43
 

haen

Super Veteran
nice vid mr. traxxas,
both bike got its own characteristics..
CBR was born for high rev with its short stroke, overbore to pick mid-hi powerband, not to mention its 6 speed transmission meant for reaching top speed.. also already equipped with 4 valves big valve.
while the DNA of LC135 was originally meant for fuel economy, and daily ride.. but speed lovas always have their way rite ? .. LoL..
 
that oversquare engine is really mid-high rpm range power...but it is faster than suzuki belang/raider?...but our t135 got some torque though...for high stroker.
 

traxxas-modifier

Super LOLO
Staff member
ghotichooder said:
that oversquare engine is really mid-high rpm range power...but it is faster than suzuki belang/raider?...but our t135 got some torque though...for high stroker.
stock cbr150 vs stock belang raider150 = cbr is faster

advantage of cbr is its 28mm and biggest valve 26/22
while belang raider has 26mm and big valve 22/18

if any belang/raider will match the specs of cbr,
thats what i want to know whats the result...

my top speed of 137kph gps reaches around 11,000rpm on 4th gear.
if i change my sprocket to a lower speed, it can reach 12500rpm,
 

traxxas-modifier

Super LOLO
Staff member
haen said:
nice vid mr. traxxas,
both bike got its own characteristics..
CBR was born for high rev with its short stroke, overbore to pick mid-hi powerband, not to mention its 6 speed transmission meant for reaching top speed.. also already equipped with 4 valves big valve.
while the DNA of LC135 was originally meant for fuel economy, and daily ride.. but speed lovas always have their way rite ? .. LoL..
yah heheh
even if our t135 has longer stroke
still we can get into higher rpm just like shorter stroke.

top speed so far on my bike reaches around 11000rpm on 137kph gps speedo
with higher gear ratio we can get more rpm...
 

phl6684

Moderator
Staff member
is ur bike can hold that much rpm sir traxxas???i mean..did the bike over revving??i just wanted to know if 12k rpm is possible if equip with high sprocket ratio..does it seem to be over revving...instead we have to lower the sprocket ratio in order to maintain the engine below over revving state??
 

macoolet

Super Veteran
jamskie's bike is really fast...hahahah...i'm wondering if racing cdi,28mm carb,ported head and stiffer valve spring is added to that cbr150,what will be the story...and just small changes for sir traxxas bike like narrow tires and lower sprocket combi...wild gues...still the same story...hehe
 

jamskie

Super Veteran
Fiat_01 said:
- nice vid sir traxx..may muntik makahead-on si jamskie ah..hehehe
:oops: :oops: because im just trying hard to overpass my groupmate eduard (cbr150) and sir traxxas..hehe
 

jamskie

Super Veteran
macoolet said:
jamskie's bike is really fast...hahahah...i'm wondering if racing cdi,28mm carb,ported head and stiffer valve spring is added to that cbr150,what will be the story...and just small changes for sir traxxas bike like narrow tires and lower sprocket combi...wild gues...still the same story...hehe
:shock: sir macoolet, im just a trying hard a wanna be rider :)
the only modification done to the cbr150 is his open pipe.the rest is stock
traxxas' sniper is superb!!!
 

traxxas-modifier

Super LOLO
Staff member
phl6684 said:
is ur bike can hold that much rpm sir traxxas???i mean..did the bike over revving??i just wanted to know if 12k rpm is possible if equip with high sprocket ratio..does it seem to be over revving...instead we have to lower the sprocket ratio in order to maintain the engine below over revving state??

our engine can hold that much rpm
remember the daytona japan video on R15?
they are running the engine upto 12500rpm

whats important if you are a high revving junkie
is you need to have good oil (fully synthetic) and good highflow oil filter

but again its really upto the owner,
engine response lies on his right hand :D
 
since we use high durability chromed inner wall aluminium die cast block, i think there should be no problem if we revving up to 13000 rpm, juz make sure the EO is enough and good enough to prevent metal wear...but if we speaking of hyper fast revving like 16k rpm, that should be avoided.
 
Top