• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Sniper Front Fork suspension

Topkick

Veteran
Fellow Riders,

How true is it, and some riders say, that it is possible to modify the stock front forks of our sniper. Its stiffness/hardness just by adding a certain kind of oil inside. How true is it? Have you heard of it?
 

ambokz

Super Veteran
i've heard that too,specially if u lowered ur front fork, to prevent sayad.hehe.tama ba? :oops:
 

sniperjohnjohn

Super Veteran
ambokz said:
i've heard that too,specially if u lowered ur front fork, to prevent sayad.hehe.tama ba? :oops:


yup dats true, theres one more .. use washer if u dont want to fill a fork oil hehe.. sorry nose bleed..
 

acidrain

Super Veteran
Fellow Riders,

How true is it, and some riders say, that it is possible to modify the stock front forks of our sniper. Its stiffness/hardness just by adding a certain kind of oil inside. How true is it? Have you heard of it?
try motul fork oil you will see the difference but be sure you will put the same ratio on each fork,
stock fork oil is 60ml
 

traxxas-modifier

Super LOLO
Staff member
try motul fork oil you will see the difference but be sure you will put the same ratio on each fork,
stock fork oil is 60ml
if only motul offer a smaller quantity of the fork oil i will buy one.
sad to say they only have 1liter...

so right now i use 2T oil :( huhuhu
 

acidrain

Super Veteran
if only motul offer a smaller quantity of the fork oil i will buy one.
sad to say they only have 1liter...

so right now i use 2T oil :( huhuhu
i also used repsol fork oil (0.5L)and 2t but i'm not satisfied for the result, well that base only on my experienced
and beside you are not using the stock fork suspension, right?
 

bhek_21

Super Veteran
if you use your front brake it will go either way,.. left or right seems like your wheel is not aligned,..
Storm_rider

Sir thank you for your reply..:thumbsup: It seems like I'm experiencing this issue as of now..:( I've changed my front tire because I thought it was the problem since there are no dents or "bengkong" on my front mag wheel. Even the bearings are okay and my T-post doesn't have any "alog" if I shake it.. Maybe or should I say that my front shock uneven stiffness is my problem..:(
 
Top