Sniper Mx Modifications

[emerson]

sir?

 

[odie_perry44]

stacc parin paps .. satisfied pa namn ako sa takbo kahit lagi ako may ankas

ok kaya ang 15-42 or 14-42? sa tulad kong 85Kls w/ 56kls na angkas ??? di kaya mahirapan c engine???

sakto ang 14/42 bro...

 

[xyience87]

smx owner here.. need advice, nka stage 2 cams, valve spring, rcdi at open pipe.. plano ko bumili ng uma 62mm block,. ok lng ba gmitin mc png long distance ride..?

 

[pedro hunyo29]

try 14/42....that's what im using...

i agree.. im using 14-42 now with my SMX and it's good on acceleration and it reach 130 for just stock with open pipe..
just try it bro..

 

[Samboy Del Rosario]

ang alam ko bro. pag nag 62mm bore ka kelangan mo na rin mag big valves para mag match. at tumakbo ng mganda ang motor mo..

 

[pedro hunyo29]

by the way.. can you please guys tell me about how to engage underneath to our SMX? please..

 

[xyience87]

ang alam ko bro. pag nag 62mm bore ka kelangan mo na rin mag big valves para mag match. at tumakbo ng mganda ang motor mo..
pero ok lng ba png long distance khit d mg big valve?

 

[Samboy Del Rosario]

yup. oks lng pero hinde lalabas ang lakas ng 62mm sa stock valves. hinde cya mkaka hinga ng maayos.

 

[xyience87]

yup. oks lng pero hinde lalabas ang lakas ng 62mm sa stock valves. hinde cya mkaka hinga ng maayos.

ty bro.. pro sa power bro mlaki ba deperensya ng uma62mm w/ stock valve sa vixion kit?..

 

[Samboy Del Rosario]

malaki bro. uma 62mm bore kit equivalent mo dyan is 180cc na, sa vixion na 57mm 150cc..
tapos mag big valve kpa 19/22 or higher. mas malakas talga. malakas din sa gas hehehehe

 

[xyience87]

malaki bro. uma 62mm bore kit equivalent mo dyan is 180cc na, sa vixion na 57mm 150cc..
tapos mag big valve kpa 19/22 or higher. mas malakas talga. malakas din sa gas hehehehe

vixion kit nlng cguro ako,.. salamat bro sa pag sagot sa mga tnong ko..

 

[JhayBoo]

smx owner here.. need advice, nka stage 2 cams, valve spring, rcdi at open pipe.. plano ko bumili ng uma 62mm block,. ok lng ba gmitin mc png long distance ride..?

vixion kit nlng cguro ako,.. salamat bro sa pag sagot sa mga tnong ko..

malaki bro. uma 62mm bore kit equivalent mo dyan is 180cc na, sa vixion na 57mm 150cc..
tapos mag big valve kpa 19/22 or higher. mas malakas talga. malakas din sa gas hehehehe

Please edit your post guys, thanks!
Hi all members (especially filipinos),

Please be reminded again for the nth time to speak english in ENGLISH SPEAKING SECTION of the forum.
This is to encourage Worldwide YamahaT135 friends & share passion about our motorcycle.
Looking Forward for Understanding...

 

[yus]

sakto ang 14/42 bro...

14/42 your top speed?

 

[pedro hunyo29]

14/42 your top speed?

for the 14/42 size sprocket will top at 130 all stock with open pipe.. try it to witness..

 

[DeViLsToRm]

i have 1 client install stage 1 cams S4 evo & CMS Valve Spring (H)

I got same setup..but my sp too lean.need to adjust jettings.any advice from the masters? My stock jet #115 mj/#15pj. Carb 25mm.

 

[kr.r_sniper]

I got same setup..but my sp too lean.need to adjust jettings.any advice from the masters? My stock jet #115 mj/#15pj. Carb 25mm.

the problem is the jettings no stock available...maybe try the OEM Carb of R150 B26 instead of STOCK Carb of MX B25

 

[JOEYBOY]

hgm gp shorty tri oval bro! i forget im using brt racing cdi

 

[jiGGer]

try nyo mga paps ,combi 14-41 smx user din ako my mods is
vixion kit,vixion cams,vixion valve spring, and vixion clutch pring,ang main jet ko 117
satisfied ako sa takbo!

how bout you pipe bro?..

 

[JOEYBOY]

try this paps ,combi 14-41 im smx user my mods is
vixion kit,vixion cams,vixion valve spring, and vixion clutch pring, my main jet ko 117
satisfied!

 

[Remie C. Apao]

sir where did you buy your belly fan?and how much...

TIA...