Sniper Mx Modifications

[Sniper 03]

Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful

 

[Leoben Dioso]

Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful

nka rimset kba fafs? lakas ah hehe

 

[Sniper 03]

nka rimset kba fafs? lakas ah hehe

oo sir naka rim ako, kaya sumibak ng raider na naka cdi at carb

 

[albertwen12]

sir i lost my pasenger pegs foot rest on my sniper mx option 1 rear set. can i buy some spares? pls help

 

[Carlopasiliao]

Sir ANo pung size Sprocket mo po

 

[Carlopasiliao]

Sir Sa Sniper MX 135 Pag naka rim po ano po ang Sprocket po ang Pwede na size

 

[jef_flash]

Yes sir sagad talaga..

120kph sir topseed allstock

 

[albertwen12]

sir

Stock sprocket combination much better.. My mc top speed 130kph all stock. when i changed the mode of my mc i change it to 14/38 it almost same as stock but i top at 160kph this is the load of my bike crg cluch spring, oko flatslide carb 28, pj 39 mj 112 rextor cdi uma high cam, jvt v.spring yun lang po stock bore is powerful

sir where did you buy your uma racing cdi? i tried Hyper band and dual band BRT i hated when i get to 135kph my rcdi still limits me at this speed. my mode is BRT rcdi dualband. namban raider 150 pipe (rebend). open stock carb 25mm. rimset small tires. faito lowcam. and clutch springs. my mc is sniper mx.

 

[juanbaktaz]

good day fellow SMX'er is 80/90-17 front and 110/70- 17 rear ok in our stock fenders?.. just wondering for future tire replacement.. or what your preferred tire size for our SMX.. tnx and ride safe...

 

[ianghol]

good day fellow SMX'er is 80/90-17 front and 110/70- 17 rear ok in our stock fenders?.. just wondering for future tire replacement.. or what your preferred tire size for our SMX.. tnx and ride safe...

i use 90/80 front and 100/80 rear still fit.just small clearance bro..

 

[rich_havens]

what is the size of the bigger rear tire for SMX?

 

[juanbaktaz]

i use 90/80 front and 100/80 rear still fit.just small clearance bro..

is 90/80 and 80/90 same paps.. wat about 110/70 for rear?.. tnx for the reply appreciate it ride safe

maybe you can post pics if any tnx

 

[ianghol]

is 90/80 and 80/90 same paps.. wat about 110/70 for rear?.. tnx for the reply appreciate it ride safe

maybe you can post pics if any tnx

i think same on hight..also with 110/70 = 100/80..just confirm it with other forumer here paps

 

[prosper]

no tweaks?

 

[stacynlheslloyd]

is 90/80 and 80/90 same paps.. wat about 110/70 for rear?.. tnx for the reply appreciate it ride safe

maybe you can post pics if any tnx

90/80 is wider and little lower than the the other and 80/90 is slimmer and little taller than 90/80

 

[Sniper 03]

sir

sir where did you buy your uma racing cdi? i tried Hyper band and dual band BRT i hated when i get to 135kph my rcdi still limits me at this speed. my mode is BRT rcdi dualband. namban raider 150 pipe (rebend). open stock carb 25mm. rimset small tires. faito lowcam. and clutch springs. my mc is sniper mx.

You need to change your v.spring. Kaya nag lilimit. I think thats not a limit of your engine its. Valve float ang tawag don kasi nka cdi ka and stock v. Spring ka pa.

 

[albertwen12]

You need to change your v.spring. Kaya nag lilimit. I think thats not a limit of your engine its. Valve float ang tawag don kasi nka cdi ka and stock v. Spring ka pa.

I'll try this advice sir, parang tama nga kasi marami ng nag sasabi sakin, after hollyday balik bacolod ako, dun siguro makakahanap, pag hindi ill try to contact sir traxx.. SALAMAT

 

[Sniper 03]

I'll try this advice sir, parang tama nga kasi marami ng nag sasabi sakin, after hollyday balik bacolod ako, dun siguro makakahanap, pag hindi ill try to contact sir traxx.. SALAMAT

Welcome

 

[John Jordan]

rs100's sprocket fits sniper mx.. I have one here.. 42T..

sir @bhek_21 whats your chain for 42t? 420?

 

[choudrie]

some one know what engine upgrade to make smx 210 cc or up... for long ride...bore,cam,crank,spring, cdi,valve,pipe, cdi,...any brand,and combination, and size...

thanks