• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Sniper Mx Modifications

S

spoked

New Member
mga boss, what brand performs better? faito or cms reagarding gear set.. do we need clutch modifications on 6th gear?
 
Eugene Quijada

Eugene Quijada

New Member
Hello everyone!

Pwedeng maka hinge nang idea kung saan tayo maka order nang vixion valve spring, and other modification accessories. yung trusted po ha.
Thanks in advance.
 
Eugene Quijada

Eugene Quijada

New Member
Im eager to upgrade my MX, to reach its maximum power but not compromising its stability standards in long drives. I've been receiving advices such as vixion valve spring, brt rcdi, & s2 cam. I considered these advices however it would be better to gather more opinions especially from a experienced buddies from this thread.
 
tabi1

tabi1

Super Veteran
Eugene Quijada said:
Im eager to upgrade my MX, to reach its maximum power but not compromising its stability standards in long drives. I've been receiving advices such as vixion valve spring, brt rcdi, & s2 cam. I considered these advices however it would be better to gather more opinions especially from a experienced buddies from this thread.
Click to expand...
Take your time and do lots of research first is the best path forward along with finding a really good Sniper mechanic. Find someone who specializes in snipers and comes highly recommended. If he's good he will save you money in the long run as you won't buy stuff that isn't worthy or is not needed. Another thing is your budget and how soon do you want the power. There's very cheap stuff out there and some very expensive motor upgrades, but you can buy a little at a time and then build the motor when you get all the parts which saves on mechanic fees :)
 
Eugene Quijada

Eugene Quijada

New Member
tabi1 said:
Take your time and do lots of research first is the best path forward along with finding a really good Sniper mechanic. Find someone who specializes in snipers and comes highly recommended. If he's good he will save you money in the long run as you won't buy stuff that isn't worthy or is not needed. Another thing is your budget and how soon do you want the power. There's very cheap stuff out there and some very expensive motor upgrades, but you can buy a little at a time and then build the motor when you get all the parts which saves on mechanic fees :)
Click to expand...
Thank you sir. Do you know someone who can provide us this vixion valve spring, RCDI, cam shaft, etc... I'm from mindanao and it's really hard to find those parts here.
 
C

CesarMontano

New Member
jessie jones canilla said:
promise bro...its not a joke..
for almost 3 kms i could do that..hehehe:thumbsup:
Click to expand...
that is a very very long way to reach 140kph. in my 15/42 ALL STOCK including pipe. i can reach 120-125kph for just 9 seconds. i am a 68kgs rider. if you're going ot be challenged for 1km drag you are absolutely lose. as from what i experienced before, 14/38 vs 15/42 both smx all stock is very far away from the acceleration. before you hit your 80-90kph on your 3rd gear the 15/42 combination is very much happy hitting 5 gear giving 115 to 120kph in less than 10 seconds.
 
Last edited:
S

sixty-thirty

Super Veteran
I need masters help . I currently have a faito turbo cam , cms valve spring ,cms gears 1 (31)-2 (29)-4 (20),Faito 7400 ignition coil ,ngk iridium plug and the problem is I don't know if I want a 60mm faito or 62mm uma block .. I know uma is way better but it costs a lot here for some reason . And other thing is do I need to change my head or is it possible to just polish my exaust port and plug and play with a uma 62mm bore ? And I have not installed any parts yet cux I want to install them all in once and I'm doing lots and lots of research because I know people here have lots of experience in lc135 or t135 . Thank you and please help.
 
grix

grix

Veteran
there Are altenatives to uma borekit bro.,u can use juwei,jvt,spec v,xray,pitsbike,.all quality parts depends on how you install them.,if your going to upgrade to 62 mm bore atleast upgrade to 19/22 valves or higher
 
S

sixty-thirty

Super Veteran
Bro .... only faito 60 mm and 62 uma block... here available ... rarely other brands ..very hard to get a valve spring other then cms or faito here
 
S

sixty-thirty

Super Veteran
And one more Question, is IKK a durable brand ? I wanted to buy a valve set by IKK to go with the cms valve spring ? Any experiences ?
 
You must log in or register to reply here.
Top