Sonnyjha
Super Veteran
thanks sa video admin.. ill go for MX nlng yun nman tlaga 1st choice ko..thanks again..
Sniper MX top speed...
- Thread starter Sonnyjha
- Start date
leatherback
Veteran
To SonnyJha
That is a very good decision, anyway, I have been with admin traxxxas sa mga GPS test namin jan sa gensan though taga mati ako. I usually ride 300plus kms from mati to gensan with my professional 12 channel garmin GPS. I already tested raider, CBR and the sniper as well with GPS but the suzuki raider got the worst speedo coz it exaggerates your speed about 20km increment compared to the reading of the GPS. Meaning, if you're running at 120km/hr, your actual speed is 100km/hr.
Anyway, using yamaha means using all good parts not from Thailand but Japanese parts to be exact. Kawahara, Faito and the yamaha original racing kits are available just contact admin traxxxas if you want to purchase genuine racing kits.
Previously, I am totally floored with the astig looks of raider as well as it's speed because raider is the second most common MC here in our locality, second to XRM. But i intensified my research on engine and performance and found out that the Yamaha Sniper engine was superbly designed. The only problem is that the parts is very scarce, I had to travel to gensan just to purchase jetting sets because even here in davao, there's no way you can buy mikuni jets. But don't worry, admin traxxas is always available.
Dun sa video na pinakita nya sayo, i tell you 57mm lang ang bore nya, he is using the vixion diasil bore kit. ang stock ng CBR is 67mm for sure. 10mm ang lamang ng CBR pero di makahabol.
Finally, the reason why i like sniper the most it's because, raider user exaggeratedly underestimating this bike but still they can't win a competition.
That is a very good decision, anyway, I have been with admin traxxxas sa mga GPS test namin jan sa gensan though taga mati ako. I usually ride 300plus kms from mati to gensan with my professional 12 channel garmin GPS. I already tested raider, CBR and the sniper as well with GPS but the suzuki raider got the worst speedo coz it exaggerates your speed about 20km increment compared to the reading of the GPS. Meaning, if you're running at 120km/hr, your actual speed is 100km/hr.
Anyway, using yamaha means using all good parts not from Thailand but Japanese parts to be exact. Kawahara, Faito and the yamaha original racing kits are available just contact admin traxxxas if you want to purchase genuine racing kits.
Previously, I am totally floored with the astig looks of raider as well as it's speed because raider is the second most common MC here in our locality, second to XRM. But i intensified my research on engine and performance and found out that the Yamaha Sniper engine was superbly designed. The only problem is that the parts is very scarce, I had to travel to gensan just to purchase jetting sets because even here in davao, there's no way you can buy mikuni jets. But don't worry, admin traxxas is always available.
Dun sa video na pinakita nya sayo, i tell you 57mm lang ang bore nya, he is using the vixion diasil bore kit. ang stock ng CBR is 67mm for sure. 10mm ang lamang ng CBR pero di makahabol.
Finally, the reason why i like sniper the most it's because, raider user exaggeratedly underestimating this bike but still they can't win a competition.
sniper135lc
Super Veteran
dre tutal may sniper old edition ka na bakit di mo i try mag scoot. mio 125 MX para maiba naman.
rowan
Super Veteran
even stock bore sniper can manage to do what you had never expect to perform , so those who ditch their sniper is a big loss
yes go for mx. yes leatherback is right very scarce or rare to find sniper performance parts. whats the use of this forum
kukulangin lang pera mo if u want mods. just pm the trusted sellers.
yes go for mx. yes leatherback is right very scarce or rare to find sniper performance parts. whats the use of this forum
kukulangin lang pera mo if u want mods. just pm the trusted sellers.
turbulence
Super Veteran
payo ko lang bro pag MX and dika nagpalit valve spring, half the throttle lang magagamit mu kc mabababa rpm ng stock MX valve spring. Useless mag rcdi pag dika nagpalit valve spring. Dahil kung saan magpaparatupot eh dun na din ang kaya ng valve spring.
macoolet
Super Veteran
kung wala pang aftermarket valve spring for MX,or hindi sila parehas ng valve spring ng old sniper,pwede naman hindi palitan yung stock valve spring,pwedeng sapinan na lang ung stock valve spring para tumigas...me iba pang technique para lumakas ang motor na hindi masyado magastos o bibili ng mga pyesa,andito lang sa site madami kayo matututunan,hanapin nyo post ni traxxas and jefraider like squish band,modified clutch housing,shaved balancer..syempre ung pagpalit ng rcdi and open pipe yan tlaga kailangan yan..madami dito sa site na malilikot ang kamay at magagaling,madami din ndi madamot mgshare ng ginawa nila(thopiang,chiglai,axon,ung mga nasa DIY thread)..halos applicable yan sa lahat ng 4stroke engine motorcycles..
sniper135lc
Super Veteran
try mo pwede yun. malamang para kang bumili ng 1 mio
rowan
Super Veteran
macoolet
Super Veteran
ndi pa naman sure..pero malay mo sukat ung mga pang loob ng old sniper sa MX..block tska head..mag 62 ka na lan tsaka big valves..pag nabitin ka pa jan e bigbike na papa hahahha
Sonnyjha
Super Veteran
yun nga eh msyado na magastos ang maintenance ng bigbike eh..tama nayung MX whehe..if wla pa msyado aftermarket parts, wait mode nlng muna me..pinatono ko knina ung OKO 27mm ko knina ndi pa ubos ung 3rdgear nka 110kph nko agad wla pa 1km ung ntatakbo ko, naubusan nko ng stright na daan.. stock bore lang gamit ko 15/40 combi.. pag nka 130kph lng me mmaya ok na sakin yun try ko ulit mmaya gabi pag maluwag na daan..
macoolet
Super Veteran
o nsan n un bore kit mo?
macoolet
Super Veteran
awww...me ppm ako sayo
turbulence
Super Veteran
Same lang naman cla ng head at bore