• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Sniper Mx Wobble At 115kph+

dekbu_otsira

New Member
good day sirs. i'm having a problem with my sniper mx. Everytime my bike reaches 115kph+ or at high speeds the front wheel starts to wobble. my sniper mx is already modified, with 100/80 rear tire and 90/80 front. my tires are dunlop arrowmax japan. i hope someone can help me with my problem
 

Stockbore

Super Veteran
good day sirs. i'm having a problem with my sniper mx. Everytime my bike reaches 115kph+ or at high speeds the front wheel starts to wobble. my sniper mx is already modified, with 100/80 rear tire and 90/80 front. my tires are dunlop arrowmax japan. i hope someone can help me with my problem
lower your front shocks for 3/4 or more inches until it doesn't wobble. and if your are using stock mags, 90/80 is too big for front use. that can also cause unstable ness at high speed. stick to 80/80
 
step by step fix I used.

1.) Use Tubeless tire. The Tube type tends to twist at highspeed. I now use 80/80 Tubeless front, 90/80 rear FDR Sports XR Evo. The grips is really great on asphalt and rough cement surface only on dry. The tires doesn't have the silica compound in battlax and michelin which I previously used,
2.) Use front Fork Stabilizer - used RB V3.
3.) Lower your front shocks - haven't tried this yet. But i observed that as the tire gets older, you will experience the wobble effect.

Question:

Can I lower my front fork still trying to use the two bolts per tube? most of the lowered i observed have only one bolt because of the locking mechanism.
 

Stockbore

Super Veteran
yes you can use all the bolts. simply remove the locking mechanism. its what we did. and you cant lowered it without removing the locking mechanism. we all use tube type front tyre and since we lowered our front shock, the wobble just gone
 

bhek_21

Super Veteran
lower your front shocks for 3/4 or more inches until it doesn't wobble. and if your are using stock mags, 90/80 is too big for front use. that can also cause unstable ness at high speed. stick to 80/80
step by step fix I used.

1.) Use Tubeless tire. The Tube type tends to twist at highspeed. I now use 80/80 Tubeless front, 90/80 rear FDR Sports XR Evo. The grips is really great on asphalt and rough cement surface only on dry. The tires doesn't have the silica compound in battlax and michelin which I previously used,
2.) Use front Fork Stabilizer - used RB V3.
3.) Lower your front shocks - haven't tried this yet. But i observed that as the tire gets older, you will experience the wobble effect.

Question:

Can I lower my front fork still trying to use the two bolts per tube? most of the lowered i observed have only one bolt because of the locking mechanism.
So 90/80 size for front tire is not recommended? hmmm... I think I will try your recommendation..;) because my tires as of now are 90/80-17 CORSA S123 and 100/70-17 Stock IRC.. I can feel wobble on uneven surfaces.. I'm planning to install 80/80 at front then transfer the 90/80 to rear..
Maybe you have point guys..

If you will also check the tires for Sniper MX at Malaysian Cub Prix Super 135 Series, their rear tires are not wide.. even the front tires..:)
 

adry

New Member
Gud day, i am newbie here.. i have sniper mx and i just want some advise regarding my tire size... im planning to change my tires to 80/80 rear, 70/80 front... would it fit well or would it look like the front tire is higher or thicker than my rear tire because the rear mags is too wide... please help, Thank you!

and by the way, is there anyone already used this combination?
 

Stockbore

Super Veteran
Gud day, i am newbie here.. i have sniper mx and i just want some advise regarding my tire size... im planning to change my tires to 80/80 rear, 70/80 front... would it fit well or would it look like the front tire is higher or thicker than my rear tire because the rear mags is too wide... please help, Thank you!

and by the way, is there anyone already used this combination?
yes it will fit but rear tire will look ugly. 90 80 will be better unless it is FDR tires then it will be just fine beacuse they are bigger
 

jayjayfzmx

New Member
sir ask ko lang po anu mgndang gawin..kc ung all stock ako nag wobble po..then nag change tires ako 90/80 rear,80/90 front michelin..pag try q kanina nag wobble parn po..then tinry ko na po ung suggestion na ipababa ang front shock..na machine shop na po..baba na..almost 1 inches na..pero nag wobble parn..T.T anu ggwin ko??napamachine shop na..T.T..
 

gunkhean

New Member
Try to change the fork oil & make the folk stiffer, check your T handle, cone bearing, rim & the disc plate....
 

jayjayfzmx

New Member
i havent install a fork stabilizer sir..i experience wobble when im reaching 5th gear and my speed is about 105-120..sometimes even 100kph its starts to wobble..T.T..
 
lol. make sure your tires are all Tubeless. The MX only weakness is the stock tubed type as well as very soft front fork.

USE tubeless tire
Install fork stabilizer
add fluid in your front fork
PSI should be @ 26 front 28 rear or even lesser. Wobble is pronounced on 30+psi specially in the front
 
check if there is a play on your front tire. Spin it and hold the Front fork < you shouldn't feel any vibration (even the slightest). Lower your front tire pressure to 25.

If all fails problem with your bearing, uneven fork play, loose/defective TPOST.
 

bhek_21

Super Veteran
I still have this problem.. :( I'm planning to purchase front fork assembly at YZone.. I'm still raising funds.. hehehe
I think that this is the only way that I can resolve my issue in steering.. I hope so..
 

jayjayfzmx

New Member
I still have this problem.. :( I'm planning to purchase front fork assembly at YZone.. I'm still raising funds.. hehehe
I think that this is the only way that I can resolve my issue in steering.. I hope so..
same here sir..i really dont know what to do..im just waiting for my stabilizer..hope it will work..
 

jayjayfzmx

New Member
I still have this problem.. :( I'm planning to purchase front fork assembly at YZone.. I'm still raising funds.. hehehe
I think that this is the only way that I can resolve my issue in steering.. I hope so..
same here sir..i really dont know what to do..im just waiting for my stabilizer..hope it will work..
 
Top