• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Special Front Shock Under carriage

Status
Not open for further replies.
M

Mr.Rockies

New Member
Special Front Shock Under carriage for T135,sniper,exciter,MX.

Made from titanium material,lightweight,re adjust rake degree.
Very good for cornering,much more quicker and stable.
Price USD 450

For buyers,please direct email to mrnemo@YMAIL.com for inquiry or PM.



 
N

nadlina7

New Member
huh...racing??
i just wanna improve the smoothest pick-up for my bike...
that's all..if i wanna talking bout racing bro...of coz i'll try championship's...
 
traxxas-modifier

traxxas-modifier

Super LOLO
Staff member
bro what is the standard rake degree of our bike?

is rake degree the advancement of FORKS in relation to the steering hole?
 
M

Mr.Rockies

New Member
@marcusfilter
its pre adjust,mean the undercarriage made on fixed degree on your request.

@traxxas-modifier
yes,the shorter will make bike more agresive on cornering.
 
M

Mr.Rockies

New Member
no traxxas,it would not effect on straight line.Just on cornering,it become more agresive.very good investment on racing.
 
marcusfilter

marcusfilter

Moderator
Staff member
Mr.Rockies said:
@marcusfilter
its pre adjust,mean the undercarriage made on fixed degree on your request.

@traxxas-modifier
yes,the shorter will make bike more agresive on cornering.
Click to expand...
ok sir...

thank you so much..

up for this item

ride safe
 
S

stroker

Veteran
Mr.Rockies said:
Special Front Shock Under carriage for T135,sniper,exciter,MX.

Made from titanium material,lightweight,re adjust rake degree.
Very good for cornering,much more quicker and stable.
Price USD 450

For buyers,please direct email to mrnemo@YMAIL.com for inquiry or PM.



Click to expand...
Sorry to intrude again. When was this product ever made in titanium??? Its aluminium, pal. Made by David. And as far as I know, its 0-degrees offset. But NOT RAKE ADJUSTABLE. Unless you convince me.

Ups. (BTW, its not too expensive).
 
M

Mr.Rockies

New Member
@stroker

sorry but we make alu and titanium.its pre adjustable so if you want to order on any degree it will be made.it can not be adjust but pre adjust.hope you understand the difference between words.anyway David is also my team on development .you may ask him.
 
S

stroker

Veteran
Mr.Rockies said:
@stroker

sorry but we make alu and titanium.its pre adjustable so if you want to order on any degree it will be made.it can not be adjust but pre adjust.hope you understand the difference between words.anyway David is also my team in development.
Click to expand...
WOW! Titanium block of this same size (not to mention the steering tube!), CNC machined and only cost US$450??? Grab it guys! ITS A STEAL! Buy it and resell it as scrap titanium, you might even get a profit out of it! :lol:

Anyway, as far as I know, no one in the market makes billet cnc titanium triple clamps. The only one on a bike is done by Kenny Roberts Team, on the KR3 (I think). And its not CNC billet, but welded up titanium construction.

I did not misunderstood words. I said, David's clamps are zero-offset. That's what it is. Its not rake adustable (or rather in your words- rake pre-adjusted). There's a difference between rake and offset. Since you did not mention offset in your specs, Im guessing you got rake and offset mixed up. The rake degreeing and offset both results in shorter wheelbases. But works differently. Go do some read-up.

Nice to know that "David is also my team in development". Gotta ask him about it the next time I see him. Cheers.
 
M

Mr.Rockies

New Member
stroker said:
Mr.Rockies said:
@stroker

sorry but we make alu and titanium.its pre adjustable so if you want to order on any degree it will be made.it can not be adjust but pre adjust.hope you understand the difference between words.anyway David is also my team in development.
Click to expand...
WOW! Titanium block of this same size (not to mention the steering tube!), CNC machined and only cost US$450??? Grab it guys! ITS A STEAL! Buy it and resell it as scrap titanium, you might even get a profit out of it! :lol:

Anyway, as far as I know, no one in the market makes billet cnc titanium triple clamps. The only one on a bike is done by Kenny Roberts Team, on the KR3 (I think). And its not CNC billet, but welded up titanium construction.

I did not misunderstood words. I said, David's clamps are zero-offset. That's what it is. Its not rake adustable (or rather in your words- rake pre-adjusted). There's a difference between rake and offset. Since you did not mention offset in your specs, Im guessing you got rake and offset mixed up. The rake degreeing and offset both results in shorter wheelbases. But works differently. Go do some read-up.

Nice to know that "David is also my team in development". Gotta ask him about it the next time I see him. Cheers.
Click to expand...
sure why not? go ask david,dont wait nest time you see him,call him now.
 
traxxas-modifier

traxxas-modifier

Super LOLO
Staff member
hi bro

how i wish you have a cheaper version of it designed for street/racing use.
one that affordable by average joe...

professional racing products really expensive :)
cannot afford by average joe like me hehehehe

but up up up for this item
 
goff_d_p

goff_d_p

Super Veteran
I agree, the product is really nice looking, and i could only wish i could afford that price, it would be more help full if you offered something just like it, but at a much more reasonable price.
 
Status
Not open for further replies.
Top