• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

T135 SWING ARM BUSHING ROLLER BEARING UPGRADE

the_one

the_one

Super Veteran
haen said:
Hi guys and gals,
I'm selling these upgrade parts for ur swing arm.
Maybe we all experiencing sways when riding our bike, especially when we carry additional passenger.
Well, according to these parts manufacturer, this was caused because T135 using rubber bushing coded 3HB-F2123-00 from its brother the Jupiter Z a.k.a Spark Z 110.

Jupiter Z a.k.a Spark Z 110 is dual shock system, while monoshock system like Vixion, Scorpio especially T135 must use bearing system.

Using these, riding at 120 km/h still feels like riding at 80 km/h

The kit are :
Genuine Vixion bearing (4 pc)
Genuine Vixion inner bushing 2 pc
Outer and inner holder ring 4 pc
O-ring dust and water sealer (4) pc


contact me at +628157179198 or yahoo messenger id haentiara for pricing and ordering.

Thanks to dokter for his solution.
Click to expand...
pm me the price bro..
 
goff_d_p

goff_d_p

Super Veteran
Heads up! I purchused the bearing kit and it's Great. I onlu had one problem installing it. I had to get a longer swing arm shaft as the threads are or in my case wer not long enough. so keep inmind that this may also be a problem for you, the solution, a Yamaha STX swing arm shaft, but needed to cut some of the new threads off so you have the desired langth.

peace, take care guys
 
H

haen

Super Veteran
@goff : strange bro.. i dont need to change anything.. maybe wrong installation ? or does Philippine's T135 got a different shaft than Indonesian's ?
 
goff_d_p

goff_d_p

Super Veteran
Maybe Haen, the stock shaft was too short by about 1/2" it's not much but when you don't have enough threads to bold on-to it can give you a big headace.

My most reacent problem was a strange squeek sound when sitting or hitting bumps in the road. i had worked on it and needed to remove just the rearset on the right side, and for some reason it squeeked after re-installing everything back. i fixed it by adding some grease to the swing arm bolt.
 
H

haen

Super Veteran
@goff : well i think it needs to be regreased, but seriously, i didn't have to change the shaft to install this, maybe u got a custom swing arm ?

@all : check again ur inbox thanks.
 
marcusfilter

marcusfilter

Moderator
Staff member
@Haen, please PM me the cost and shipping for 5 or more bearing upgrade set...
and 1 set only

thanks

ride safe
 
A

arwin d. camino

New Member
haen said:
@paradox : the t135 swing does not use bearing for bushing, only rubber bushing type, u can imagine when the rubber shrinks 2 mm would sway the swing arm about 8 mm.
About comparison : here's the picture of T135 bushing



this is vixion bearing



you can see the difference above
Click to expand...
how about solid steel bushing... no rubber just pure steel and pressed... have you try that? im just wondering if it will work...
 
You must log in or register to reply here.
Top