Denso Iridium or lower model
T135 technical/modification discussion (ENGLISH ONLY)
- Thread starter marcusfilter
- Start date
raider125jeigh
Super Veteran
ah OK..marcusfilter said:
whats the brand of our stock SP?
ngk
raider125jeigh
Super Veteran
ah okie... il try to regap it if it is hard starting hehe... tipidmeals hahahamarcusfilter said:
Undah-Bone
Super Veteran
TRD? TIPID RACING DEVELOPMENT? hahaha.raider125jeigh said:
raider125jeigh
Super Veteran
hehe..Undah-Bone said:
have you replace your stock SP?? or your a member of TRD hehehe
sniper135lc
Super Veteran
anyone here have use battlax 39ss on front wheel on a stock fender? 80/90 or 90/80? any modification required? thanks in advance..... ride safe 
raider125jeigh
Super Veteran
U better try 90 x 80 than 80 x 90.... but this tires are over size hehehe...sniper135lc said:anyone here have use battlax 39ss on front wheel on a stock fender? 80/90 or 90/80? any modification required? thanks in advance..... ride safe
denso iridium...tried twice already...both got busted...tried NGK platinum...so far so good
90 80 battlax need some adjustment on your FF
linjunvelasco
Super Veteran
im using ngk right now before denso iridium it get busted so easily ...my snipee is almost 3 years and if i remember i already consumed atleast 6 denso iridium ... some says that denso iridium is good for racing (one usage )only
goff_d_p
Super Veteran
Thanks for that tip. I was planning on getting a Denso Iridium SP for my Sniper, now, I think I will stick with the NGK.
I know the gap setting is .80-.90 for the stock plug, but sense the Iridium NGK is slightly shorter at the tip, what can we do to bring the tip down to the same stock SP langth? Remove the washer on the plug?? ??hummmm I don't think that is a good idea. It's their for a reason. I think
I have tried the Denso U24EPR-9 compaired to the stock NGK CPR8EA-9 I didn't feel any differance. but with the NGK Iridium i did feels some.
I know the gap setting is .80-.90 for the stock plug, but sense the Iridium NGK is slightly shorter at the tip, what can we do to bring the tip down to the same stock SP langth? Remove the washer on the plug?? ??hummmm I don't think that is a good idea. It's their for a reason. I think
I have tried the Denso U24EPR-9 compaired to the stock NGK CPR8EA-9 I didn't feel any differance. but with the NGK Iridium i did feels some.
interceptor
Super Veteran
been using ngk iridium since my first tuneup...marcusfilter said:
until now 34000kms odo, still workin...
its built to last ata... :lol: :lol: :lol:
when was your last tune up? your snipee is a work horse...
raider125jeigh
Super Veteran
34,000 ampf!!!!interceptor said:
how much is NGK iriduim.. hehehe
interceptor
Super Veteran
first and last po is at 10,000kmz or 12k ata...marcusfilter said:
i cant remember...
its the tuneup that comes free with the service warranty...
just like ERNIE BARON said, if you break it, its considered sold.. :lol:
my mistake.. its "IF IT AINT BROKE, DONT FIX IT"... :lol: :lol: :lol:
interceptor
Super Veteran
yes its 34500 on odo right now...raider125jeigh said:
excluding the unregistered mileage in a month while the speedo cable was broken...
ngk iridium original at TRES HERMANAS was p415 at that time... SULED!!!! :lol:
34500k ODO....watda....my snipee is 30k only...but if I dont have my other bike,Nuovo, who got 20k in Odo reading that is whooping 50k odo reading....adik....
interceptor
Super Veteran
yes sir, 34500....marcusfilter said:
plus a month of unknwon mileage while the odo cable is unavailable...