T135 technical/modification discussion (ENGLISH ONLY)

[idoy_23]

denso iridium...tried twice already...both got busted...tried NGK platinum...so far so good

been using ngk iridium since my first tuneup...
until now 34000kms odo, still workin...

its built to last ata... :lol: :lol: :lol:

thats great sir..... im still using the stock SP, on sat sched tune-up of my snipee im planning to replace it with irridium.. odo reading 12600+...

 

[raider125jeigh]

denso iridium...tried twice already...both got busted...tried NGK platinum...so far so good

been using ngk iridium since my first tuneup...
until now 34000kms odo, still workin...

its built to last ata... :lol: :lol: :lol:

thats great sir..... im still using the stock SP, on sat sched tune-up of my snipee im planning to replace it with irridium.. odo reading 12600+...

hehehe.. me im still using stock stil working good.. almost 10k odo in 7 months..

 

[mingomz]

where can I get spacer for sniper?

 

[wingman44]

when was your last tune up? your snipee is a work horse...

first and last po is at 10,000kmz or 12k ata...

i cant remember...
its the tuneup that comes free with the service warranty...

just like ERNIE BARON said, if you break it, its considered sold.. :lol:









my mistake.. its "IF IT AINT BROKE, DONT FIX IT"... :lol: :lol: :lol:

For some guys.... "If it ain't broke....BROKE IT"

 

[wingman44]

where can I get spacer for sniper?

Tol, exactly what kind of spacer are you looking for? I might have some at the shop.

 

[rmtebotz23]

goodmorning masters..any idea about this new pipe (RAR SSM RACING) for our snipee.. i heard that this one is imported,same performance and apperance like YY pang..

TIA masters...


more power SOS...

 

[depedal]

hi guys,. any idea behind the concept of a replacement SP with a small hole on the end of one of its tip? (side electrode)

TIA

 

[mingomz]

where can I get spacer for sniper?

Tol, exactly what kind of spacer are you looking for? I might have some at the shop.

For the rear shocks, just want to try my sniper elevated. I am more with it. my t\2 previous bikes where elevated before.

btw, is it hard to install the spacer?

 

[wingman44]

where can I get spacer for sniper?

Tol, exactly what kind of spacer are you looking for? I might have some at the shop.

For the rear shocks, just want to try my sniper elevated. I am more with it. my t\2 previous bikes where elevated before.

btw, is it hard to install the spacer?

I'm confused. I thought you only need a spacer for something else. When we elevate the height of the mc, what we normally do is we put a lifter on top of the monoshock. This way, the entire rear portion of the bike would be elevated to a desired height.
For this, we bring the monoshock to a machine shop so the necessary work could be done in a safe and secured way.
I'd be happy to do this kind of work for you should you decide to bring your bike to our shop. Medyo malayo nga lang kami tol, but if you could find the time, you're always welcome here.

 

[linjunvelasco]

goodmorning masters..any idea about this new pipe (RAR SSM RACING) for our snipee.. i heard that this one is imported,same performance and apperance like YY pang..

TIA masters...


more power SOS...

know what ser kung me bagong labas at maganda sya bili na lang agad he he he mahirap kasi malaman ang performance kahit anung ganda ng pipe kung stock lang naman ang mods mo ganun din yun in other words pare pareho lang yan tulad dati uso dbs lahat naka dbs ngayun naman uso yypang halos lahat naka yy pang baka pag nakita ku yang rar ssm racing na yan at maganda ay baka ibenta ko na naman yung yypang ko at bilhin yan ahi hi hi

 

[marcusfilter]

T135 technical/modification discussion (ENGLISH ONLY)

 

[linjunvelasco]

oops sorry i thought i was on the off topic thread.. again sorry sir

 

[raider125jeigh]

oops sorry i thought i was on the off topic thread.. again sorry sir

hahaha...



any pics for the said pipe? how does it look?

 

[jchris1124]

@sir chris
Ako po ung nakasabay nyo pauwi,di ko po napansin na jan pala kayo sa jolibee magstop,di na ko nakapagpaalam,aun.lakas ng rextor di ako makadikit,hahaha ingat po

 

[linjunvelasco]

sir jchris1124 technical mod (english only) we have an off topic thread thanks ride safe

 

[goff_d_p]

[quote="wingman44
I'm confused. I thought you only need a spacer for something else. When we elevate the height of the mc, what we normally do is we put a lifter on top of the monoshock. This way, the entire rear portion of the bike would be elevated to a desired height.
For this, we bring the monoshock to a machine shop so the necessary work could be done in a safe and secured way.
I'd be happy to do this kind of work for you should you decide to bring your bike to our shop. Medyo malayo nga lang kami tol, but if you could find the time, you're always welcome here.[/quote]

Bro be carful with adding a rearshock spacer. I have one and after about thre weeks of riding i had some big problems
you know the plastick chain guide on the swing arm? it got sucked into the front sprocket and locked up the rear tires so bad i has to take the gear box apart to fix it. also it damages the bushings in the swingarm joint that holds the swingarm onto the frame. well atleast it did with mine.

Just be carfull bro

 

[wingman44]

[quote="wingman44
I'm confused. I thought you only need a spacer for something else. When we elevate the height of the mc, what we normally do is we put a lifter on top of the monoshock. This way, the entire rear portion of the bike would be elevated to a desired height.
For this, we bring the monoshock to a machine shop so the necessary work could be done in a safe and secured way.
I'd be happy to do this kind of work for you should you decide to bring your bike to our shop. Medyo malayo nga lang kami tol, but if you could find the time, you're always welcome here.

Bro be carful with adding a rearshock spacer. I have one and after about thre weeks of riding i had some big problems
you know the plastick chain guide on the swing arm? it got sucked into the front sprocket and locked up the rear tires so bad i has to take the gear box apart to fix it. also it damages the bushings in the swingarm joint that holds the swingarm onto the frame. well atleast it did with mine.

Just be carfull bro[/quote]

@ goff_d_p

Thanks bro. Advice well-taken.
Rest assured though that as far as we can tell, we've taken all necessary precautionary measures to prevent any mishaps from happening {with regards to this mods}. And after about 20 or so bikes fitted with this kind of lifters, I think we've pretty much covered all angles.
But nonetheless, thanks for the advice. It was a nice gesture from you

 

[linjunvelasco]

pwede pala yung pang wave 125 na oil seal sa sniper?kaylangan ku ng palitan kasi yung sa akin ..anu ba ang pinakamagandang sukat ng fork oil pag aftermarket na front shocks ang gamit? input naman mga ser para masabi ko sa mekaniko

 

[interceptor]

@linjun

where you able to purchase the seals sir?
its available at triumph jt (west ave)

i think the amount of oil should still be the same sir...
unless you want a stiffer ride...

 

[marcusfilter]

@linjun, it differs on the size of the shock cover, if you're still using Trusty shock cover i have the correct amount of fork oil for that. It is really hard to estimate. You have to test it then if it's not good enough, you have to remove the cap, the FS and oil...grrrr....

stock shock cover & After market shock cover dont have the same capacity of form oil...that is through experience and not hear say.

thanks

ride safe