T135 technical/modification discussion (ENGLISH ONLY)

[marcusfilter]

Easily get busted? how often? if it's unsual, there might be some problem with your electrical wiring/s

with Signal relay, not quite sure though if it's the same with cars, but Relays that's being used for our HID, it's just the same with cage...

ride safe

 

[linjunvelasco]

papa marcus ikaw ba yan?hu hu hu hu naiiyak naman ako ikaw pa sumagot sa tanung ko miss na kasi kita mwah! isang beses pa lang naman nagbusted nagkabit kasi ako ng all led (12 pieces (each) led front signal light-aftermarket) di na gumana yung signal light after using it for 3 days pati yung arrow sign na left and right sa panel nawala din buti na lang me spare ako na relay..iniisip ko lang baka kasi di kaya ng relay anyway experiment ko pa lang naman yun balik ulit stock..

 

[marcusfilter]

ha ha ha...it's me...but LED has a minimal voltage consumption compared to peanut bulb...but as you've said, 12pcs LED, maybe that's causing the issue here or better yet, find a good signal relay.

I am always here...watching...

hope you guys understand, me being not present in EB's and posting in important thread/s
reason: once I posted, it will continue... for every event, important event that I am involve, I always make it a point that it will be a success or huge success...

to achieve SUCCESS, you need TIME, DEDICATION, PATIENCE and ASSISTANCE. As of now, I cant give that guys. My priority for the last quarter of the year is my Family. My Snipee is 75% ok as of the moment, need some parts to be replace, still finding time to cope up with it

ride safe guys
I miss you all

 

[BOSS_CHO29]

just take your time pre...hoping that youll be with us on our charity ride...

miss you pre...

back to topic...

 

[linjunvelasco]

sorry english thread ...i just carried away

 

[mingomz]

I use Niles japan that I bought from a autosupply shop, the relay was about 100 - 120 pesos?

I have been using it for 6 mos now no prob with me

btw, is the peanut bulb size of the guage light same as the one in the park light?

Want to change mine

Also..

@ pres, my suspension is performing bad again

 

[linjunvelasco]

lets talk about gearing....how much is the complete set?what is the recommended brand? how much is the labor? how many numbers of hours it would take to finish installing the said gearing? can we possibly change all the gearings instead of just the 4th gear..and lastly...who is the best mechanic you can recommend for the job? he he he so many questions

 

[marcusfilter]

I use Niles japan that I bought from a autosupply shop, the relay was about 100 - 120 pesos?

I have been using it for 6 mos now no prob with me

btw, is the peanut bulb size of the guage light same as the one in the park light?

Want to change mine

Also..

@ pres, my suspension is performing bad again

Peanut bulb for Park light and Panel are the same

 

[marcusfilter]

lets talk about gearing....how much is the complete set?what is the recommended brand? how much is the labor? how many numbers of hours it would take to finish installing the said gearing? can we possibly change all the gearings instead of just the 4th gear..and lastly...who is the best mechanic you can recommend for the job? he he he so many questions

- Transmission gear? I think it's about 7k...
- Number of hours? 3-4 hours give or take
- can we possibly change all the gearings instead of just the 4th gear? of course we can, transmission gear set. LHK or Kitti
who is the best mechanic you can recommend for the job? Revzone or Gerry sta maria

 

[wingman44]

lets talk about gearing....how much is the complete set?what is the recommended brand? how much is the labor? how many numbers of hours it would take to finish installing the said gearing? can we possibly change all the gearings instead of just the 4th gear..and lastly...who is the best mechanic you can recommend for the job? he he he so many questions

Better get the LHK complete racing gear set......that is if you can get one nowadays. I've been looking for this for a couple of months now to no avail.
I had one but Ezra asked me to put it on his bike first. [B]We installed it on his bike and it was a blast. [/B]This is one engine upgrade that is really worth your money.
Be ready to spend around 3.5K for machine shop works and the installation cost. That is on top of the cost of the racing gear.
One time I'll have you try Ezra's bike so you can feel the benefit of the racing gear.

 

[linjunvelasco]

thanks for the input ..so more or less around 10 thousand plus...is there any downside or what we called negative effect on the engines performance like gas consumption etc etc ?is there a way we can get orders abroad ?

 

[wingman44]

thanks for the input ..so more or less around 10 thousand plus...is there any downside or what we called negative effect on the engines performance like gas consumption etc etc ?is there a way we can get orders abroad ?

We installed the gear set about two months ago and to date, all I hear from Ezra was his raving about the improvement of his bike's performance.
There is a minimal and tolerable increase in his fuel consumption. But then again, the benefit of the additional power far outweighs the slight increase in fuel consumption.

 

[schmuck]

i made a thread reagarding this query
but i gues this thread suite to my questions...


how wide can i go using stock mags?
cause im planning to have 100/90
or more wider...but i have a doubt f
the tire would really expand, i mean
the result of using stock mags to wide
tires...

how wide is our stock mags by the way?

and as well, im planning to
have a fabrication of a shock
lifter, can anyone provide me
some pictures?...and ho much
height is advisable? 1 inch or
2 inches?... DETACHABLE lang sana

TIA po!!!!

 

[marcusfilter]

Engine Theory....Increase in power = Increase in Gas Consumption

 

[linjunvelasco]

Engine Theory....Increase in power = Increase in Gas Consumption

with my mods right now my gas consumption is still ok you can ask chris about it... my gas consumption is even minimal compare to yoko who still use stock block..i always compare my gas consumption on every gas stop we had ..being 3rd behind rod and chris is not
easy.. those two are veteran when it comes to riding..one thing ive learned with this ride is that first..having vixion kit. big carb, pnp. racing cam and racing cdi is not at all that bad when it comes to gas consumption..2nd...sss sprocket is good in long drive even uphill no problem whatsoever...3rd ..bridgestone exedra is the best and most durable everyday tire for me its so unfortunate that they have already stop the production of this tire..this is my 3rd baguio ride using this tire i even used it one time on highest point...this tire is 2 and a half years old (everyday office use) i wonder what kind of tire i would buy next year...to sum it up i believe that gas consumption also depends on your driving style..the way you squeeze your throttle...maybe im wrong ...maybe...... it depends on how good is your bikes mechanic.. AH BASTA MAS MALAKAS PA RIN SA GAS ANG NAKA-CAGE HE HE HE

 

[Black Panther]

is that racing transmission gears can be installed on a stock t135? or is it advisable to change the 4th gear only

 

[wingman44]

[quote="wingman44



Better get the complete racing gear set......that is if you can get one nowadays. I've been looking for this for a couple of months now to no avail.

 

[mingomz]

Hi,

What is the logic behind changing the widths of our chain? I see some folks who have thinner chains and others using thicker.

Hope you can enlighten my confusion.

Thanks!

 

[BOSS_JAY316]

WARNING PETRON XCS has E10

Nag karga kami ng gas kagabi. Hindi pa nga alam ng gas boy na may E10 na ang XCS nila. Tinuro pa namin sa kanya ang sticker.

<center>

</center>

Pero, yung Blaze wala pang nakalagay na E10 sticker. (P49.60 a liter)

 

[BOSS_CHO29]

blaze na din kinarga ko kanina sa mc ko...sa seaoil yata wala pang E10....

ride safe...