Ericson
Super Veteran
Just want to share my experience here since Im also a newbie I ask a member here if what is the best settings for a all stock engine with an open pipes he told me that close my A/F screw and just get it on 1/2 and here's what happened here's my SP..
And now I"ll try this 2 1/2 turns.. hopefully my SP burns well and have a golden brown burn of fuel..
And now I"ll try this 2 1/2 turns.. hopefully my SP burns well and have a golden brown burn of fuel..
Attachments
-
58.5 KB Views: 124




Hi all, i'm new here. I'm learning in tweaking my 2012 T135, just done upgrading with 57mm vixion cylinder kit,yoshimura exhaust but having problem tuning my mikuni BS25 carb. Now the main jet is #125, but i simply couldn't find the correct air screw turn. When i opened up the throttle it will jerk/bogging also when in high RPM it sound not so smooth. its been a few weeks having the issue. With limited free time, it quite difficult for me to spend a lot of time on it. Needed help on advise on what is the factory air screw turn for mikuni BS25 or baseline air screw turn after my upgrading.