• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

[TIPS] Optimum Air Fuel settings for your T135

khai2717

New Member
Dunno y, but my bike starting to sound abit raspy 4 days after changed the air/fuel mixture setting... the vibration also increasingly like b4 change a/f settng.. its not my chain.. its the engine.. last engine oil n spark plug change on 3k.. planning next engine oil n air filter change on 5k.. changed oil filter @ 2 k.. currently my bike on 4.1k...
other than that, i did nothing to the bike..

anybody knows y?
 

traxxas-modifier

Super LOLO
Staff member
khai2717 said:
Dunno y, but my bike starting to sound abit raspy 4 days after changed the air/fuel mixture setting... the vibration also increasingly like b4 change a/f settng.. its not my chain.. its the engine.. last engine oil n spark plug change on 3k.. planning next engine oil n air filter change on 5k.. changed oil filter @ 2 k.. currently my bike on 4.1k...
other than that, i did nothing to the bike..

anybody knows y?
try to adjust Air Fuel setting

try from 1-5/8 turns then increase (see below)
after adjusting the turns, better use it for a day
so that the adjustment you made will be properly set and you will
really feel the difference. and have it run to the max at least once...


1st day:
* 1-5/8 turns

2nd day:
* 2 turns

3rd day:
* 2-1/8 turns

4th day:
* 2-1/4 turns

then based from those which do you think is best...
just make sure DONT GO BELOW 1-5/8 turns becuase
your bike will run leaner (lack of fuel)
as what yamaha mechanic says.. more is better than less.

i am now currently set 2-1/8 turns and looks good too.
the settings will really depends on your place (elevation)

just be patient... i have fully tuned my A/F mixture for a month, adjusting which i think is best :)
so just be patient :)
 

goff_d_p

Super Veteran
hey traxxas, i tryed what you suggested 2 1/8 turn, i found that the outer edge of my sparkplug is black, the the procalyn and tip of plug is a good color. for those of you that do the adjustment. keep checking it. my plug from the factory, looked good. i also noticed that the gap on my plugs from factory was not .8-.9 it was dead on .85mm just keep and eye on color of you plug after you do your adjusting. and follow the guides given somewhere in the form about the color of your plug. i just made a new adjustment to 1 3/4 just to try it out. haven't had a road test yet.
 

khai2717

New Member
thanks traxxas but i'm starting to get worried bout my bike cos the vibration is getting worse.. my fingers still tingly when i get off my bike after 15 min... i'm not exagerating.. wish i can open up the engine to see whats wrong.. the pick up and a speed is still there. i'm scared i that i might have ruined the bike..
 

khai2717

New Member
i just did just as what the author of this thread said to do.. except for the checking of the spark plug colour... i tink tomoro i'm gona check it out.. i didnt slowly go to the turn of 2 1/4 day by day.. i got to the setting straight away.. but i so called meddled wit the pilot air screw cos i keep changing it to 2 turn, standard 1 5/8 turn then back to 2 1/4 turn everyday cos i could not get the level of comfort that i wanted.. i did it so often that now when i turn the screw, it doesnt turn smoothly.. sorta get stuck.. haha.. my bike is now 4.2k km++... wish any of u guys live ard here.. none of my frenz here know wats wrong.. if the proplem persist, then i might have to ask the mechanic to rectify it the next time i service my bike.. haiz.. kaching!!! $$ fly away...
 

goff_d_p

Super Veteran
turn the screw all the way clock wise till it stops. mark it's location on side. they just for shits and gigels just turn it 2 rotations, you have the distance of the 1 5/8's turn from factory to 2 1/8ths turn to play with. just remember the more turns you have the more lean the feul is in mix, i think??
 

khai2717

New Member
hey i did get the right screw rite?

down there. there r 2 screws, the air screw is the 1 on the left right? the 1 on the right is further in right? wats that screw for by the way? the on right..
 

goff_d_p

Super Veteran
all i know is after i did the 2 1/8 turn and rode a wile, my plug had black burn on the metel part. but the procalin and the tip was all ok?
 

MioBikerBoyz

Super Veteran
You guys should not meddle with all these things in the first place! Just leave the carb alone and everything gonna be eyeree mon!
 

rooster

Super Veteran
khai2717 said:
hey i did get the right screw rite?

down there. there r 2 screws, the air screw is the 1 on the left right? the 1 on the right is further in right? wats that screw for by the way? the on right..
left side is for mixture..the right side is for idle speed..
 
Top