• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Uma Superhead Tips & Tricks

john_carlo

john_carlo

Super Veteran
yalomed said:
are you running on stock crank and how long can it sustain 15k rpm, still stock valve spring?
Click to expand...
using tk valve spring... in a couple of second coz it need to change gear no need to sustain it @ around 15k rpm for a long period there is another gear for me to shift..
 
UMA Agent

UMA Agent

New Member
Question is how did you fit a 26mm yoshi carb into the uma superhead manifold since the rubber comes with the uma superhead I measured at least 30mm. and you can fit a 26mm carbie onto it. How?
 
traxxas-modifier

traxxas-modifier

Super LOLO
Staff member
nadelapena said:
Hoping to see the link share by @traxxas-modifier the "Top secret section." even if i am a new member. if not allowed its ok..still TWO THUMBS UP on this. :)
Click to expand...
top secret section is only available to members who are active and gain certain trophy points.
so just be active and post in the forum and the system will automatically allow you to access it.
 
ross42102

ross42102

Member
traxxas-modifier said:
top secret section is only available to members who are active and gain certain trophy points.
so just be active and post in the forum and the system will automatically allow you to access it.
Click to expand...

I cant find this "Top Secret" section even though im active and posting some queries and topic in this forum....What certain amount of point should be in order to access in this section....Thanks and Ride Safe Always admin @traxxas-modifier ...
 
Julio25

Julio25

Veteran
sir
ross42102 said:
I cant find this "Top Secret" section even though im active and posting some queries and topic in this forum....What certain amount of point should be in order to access in this section....Thanks and Ride Safe Always admin @traxxas-modifier ...
Click to expand...
sir ross42102 as per sir traxxas said, you have or we have to keep on posting and be active and the system will automatically allow you to access the top secret section..=) im sure theres so many post and informative infos there for t135 users like us..=)
 
ross42102

ross42102

Member
Julio25 said:
sir

sir ross42102 as per sir traxxas said, you have or we have to keep on posting and be active and the system will automatically allow you to access the top secret section..=) im sure theres so many post and informative infos there for t135 users like us..=)
Click to expand...

Can you access it now the top secret section sir @Julio25 ????.... If so, what are the topics that were discussed/shared there???....:rolleyes::rolleyes::rolleyes:
 
Julio25

Julio25

Veteran
right now i cant access the top secret section sir ross42102..=) because im also a newbie here..i have to gain enough points for me to access the top secret section..=) im pretty sure there is more infos and post there that can help us in our bike..
 
zcbitik

zcbitik

Super Veteran
additional question master, is the 28mm carb can handle the super head?.. thanks in advance..
I am asking because of my my future mods, I don't want go more than 28mm, as much as possible 26 to 28mm carb only

@john_carlo - bro does the 26mm carb will last long like for daily drive (if Im gonna use UMA block +UMA Head setup)

btw. does this two combination is good for A/C? if not then let me know so I will renew my list (project-mamaw)
 
Ericson

Ericson

Super Veteran
zcbitik said:
additional question master, is the 28mm carb can handle the super head?.. thanks in advance..
I am asking because of my my future mods, I don't want go more than 28mm, as much as possible 26 to 28mm carb only

@john_carlo - bro does the 26mm carb will last long like for daily drive (if Im gonna use UMA block +UMA Head setup)

btw. does this two combination is good for A/C? if not then let me know so I will renew my list (project-mamaw)
Click to expand...

UMA-atikabong project ni sir.. Up.!
 
john_carlo

john_carlo

Super Veteran
zcbitik said:
additional question master, is the 28mm carb can handle the super head?.. thanks in advance..
I am asking because of my my future mods, I don't want go more than 28mm, as much as possible 26 to 28mm carb only

@john_carlo - bro does the 26mm carb will last long like for daily drive (if Im gonna use UMA block +UMA Head setup)

btw. does this two combination is good for A/C? if not then let me know so I will renew my list (project-mamaw)
Click to expand...
I'm using uma 28mm carb


egbert123 said:
sir @traxxas-modifier can we use the stock connecting rod on this or possible to buy much stronger one..tnx:)
Click to expand...
We can sir..
 
You must log in or register to reply here.
Top