voltage Stabilizer??
- Thread starter keciks
- Start date
i believe these are made of series of capacitors ?
G
Guest
Guest
Exactly. There are many capacitors in variety values, plus a diot zener to make the output voltage constantly :lol:traxxas-modifier said:
G
goff_d_p35
Guest
guys, check this out, see if this would be use full.
http://cgi.ebay.co.uk/SOLID-STATE-VOLTA ... 240%3A1318
In case the link doesn't work, this is the ad below
________________________________________________________________________________________________________________
12v DC VOLTAGE STABILIZER
FOR NEGATIVE & POSITIVE EARTH CARS
This is a solid-state voltage stabilizer for classic cars with 12v negative or positive earth. This is a direct replacement for the bimetal spring and contact breaker device that was fitted to classic cars originally.
The cars battery voltage is fed into a voltage stabilizer, which is normally 12v with engine off and about 14v when engine is running. The voltage stabilizer reduces this voltage to a steady 10v for the instrument gauges so they don’t fluctuate with the battery voltage.
The original voltage stabilizer is unreliable and they break down after a while and either over read or allow full system voltage to the gauges, which will burn the gauges out. This alternative is a modern solid-state device which will do the same job but is much more reliable and won’t burn out your gauges.
I have tried and tested this device on my 1972 Triumph Spitfire. This device plugs straight in to the original wiring and works perfectly with a nice steady 10v output. This device will work on other classic cars including Ford, Jaguar, Triumph, MG, Lotus, Daimler, Rolls Royce, Mini Cooper, or any other classic car that has a 12V negative or positive earth electrical system and mechanical gauges. The enclosure's measurements are, 36 by 16 by 24mm. The cables are long enough to alter for different cars if necessary.
This item directly replaces your original stabilizer and is very simple to fit. It works better than the original stabilizer because it uses modern components.
I make these stabilizers myself and for your own piece if mind I am a fully qualified electrical engineer. I have sold these stabilizers to many customers on ebay and elsewhere without a single complaint. I am always willing to make bespoke items for people with different requests.
**PLEASE STATE IF YOUR CAR IS NEGATIVE OR POSITIVE EARTH WHEN PURCHASED**
Here is some of the feedback I have received
neat unit , with precis and clear instructions
quick sender, great item, imprecive instalation manual. greatly recommend!
thank you for your swift postage-My fuel gauge now works perfectly
good instructions and super fast delivery 5*
All as described, fitted and working. Recommended
Good product,quick delivery,good eBayer
thanks recived today just the job to keep an old car happy
Very quick service - now to fit it!
Quick delivery, item as described, What More Could You Want!
Super fast international delivery!
Quick International Delivery, exactly what I was looking for, a must have item
This sale is for the voltage stabilizer as pictured and a simple guide on how to fit it.
I have not had any complaints or returns, but if you purchase this product and are not happy with it you can return it within 30 days and I will send you another or refund the costs. Please e-mail me I if you have any problems with the stabilizer before sending it back.
MULTIPLE ITEMS ARE AVAILABLE, E-MAIL IF REQURED
Postage costs are as follows.
UK and Europe £1.50
Australia £2.00
America £2.00
Canada £2.00
Any other destinations please e-mail before you purchase.
On 06-Apr-06 at 04:44:16 BST, seller added the following information:
Pay instantly with your debit or credit card through PayPal.
Pay me securely with any major credit card through PayPal.
VisaMasterCardAmerican ExpressSoloSwitch
______________________________________________________________________________________________________
I also fount a forum that talks about it. here is a link, a member in that forum made a V.S. for his car. maybe someone here can get into this forum and find out more info and maybe a ket that is for sale.
http://www.zerotohundred.com/newforums/ ... lizer.html
http://cgi.ebay.co.uk/SOLID-STATE-VOLTA ... 240%3A1318
In case the link doesn't work, this is the ad below
________________________________________________________________________________________________________________
12v DC VOLTAGE STABILIZER
FOR NEGATIVE & POSITIVE EARTH CARS
This is a solid-state voltage stabilizer for classic cars with 12v negative or positive earth. This is a direct replacement for the bimetal spring and contact breaker device that was fitted to classic cars originally.
The cars battery voltage is fed into a voltage stabilizer, which is normally 12v with engine off and about 14v when engine is running. The voltage stabilizer reduces this voltage to a steady 10v for the instrument gauges so they don’t fluctuate with the battery voltage.
The original voltage stabilizer is unreliable and they break down after a while and either over read or allow full system voltage to the gauges, which will burn the gauges out. This alternative is a modern solid-state device which will do the same job but is much more reliable and won’t burn out your gauges.
I have tried and tested this device on my 1972 Triumph Spitfire. This device plugs straight in to the original wiring and works perfectly with a nice steady 10v output. This device will work on other classic cars including Ford, Jaguar, Triumph, MG, Lotus, Daimler, Rolls Royce, Mini Cooper, or any other classic car that has a 12V negative or positive earth electrical system and mechanical gauges. The enclosure's measurements are, 36 by 16 by 24mm. The cables are long enough to alter for different cars if necessary.
This item directly replaces your original stabilizer and is very simple to fit. It works better than the original stabilizer because it uses modern components.
I make these stabilizers myself and for your own piece if mind I am a fully qualified electrical engineer. I have sold these stabilizers to many customers on ebay and elsewhere without a single complaint. I am always willing to make bespoke items for people with different requests.
**PLEASE STATE IF YOUR CAR IS NEGATIVE OR POSITIVE EARTH WHEN PURCHASED**
Here is some of the feedback I have received
neat unit , with precis and clear instructions
quick sender, great item, imprecive instalation manual. greatly recommend!
thank you for your swift postage-My fuel gauge now works perfectly
good instructions and super fast delivery 5*
All as described, fitted and working. Recommended
Good product,quick delivery,good eBayer
thanks recived today just the job to keep an old car happy
Very quick service - now to fit it!
Quick delivery, item as described, What More Could You Want!
Super fast international delivery!
Quick International Delivery, exactly what I was looking for, a must have item
This sale is for the voltage stabilizer as pictured and a simple guide on how to fit it.
I have not had any complaints or returns, but if you purchase this product and are not happy with it you can return it within 30 days and I will send you another or refund the costs. Please e-mail me I if you have any problems with the stabilizer before sending it back.
MULTIPLE ITEMS ARE AVAILABLE, E-MAIL IF REQURED
Postage costs are as follows.
UK and Europe £1.50
Australia £2.00
America £2.00
Canada £2.00
Any other destinations please e-mail before you purchase.
On 06-Apr-06 at 04:44:16 BST, seller added the following information:
Pay instantly with your debit or credit card through PayPal.
Pay me securely with any major credit card through PayPal.
VisaMasterCardAmerican ExpressSoloSwitch
______________________________________________________________________________________________________
I also fount a forum that talks about it. here is a link, a member in that forum made a V.S. for his car. maybe someone here can get into this forum and find out more info and maybe a ket that is for sale.
http://www.zerotohundred.com/newforums/ ... lizer.html
Attachments
G
goff_d_p35
Guest
http://intakeone.com/Pivot/Piv_VS1E.html
PIVOT Raizin volt stabilizer, comes with options: with or without Super Earth spark plug earth tune-up system. Including all installation hardware and manual, made in Japan.
- Increases torque at low and middle speeds.
- Stabilizes idling and improves engine kink-over.
- Improves engine response.
- Increases headlight brightness.
- Improves fuel economy.
- Improves battery life.
- Improves bass sound.
Performance parts detail information update
Product Name Pivot RAIZIN volt stabilizer - Universal voltage stabilizer systems
Price (US dollars) $85.00
Shipping & Handling $18.45
Option - ( with Pivot Grounding system $170.)
Sounds like a good system to me. but i just noticed this warning: Warning: IntakeOne.com will not be responsible for any damage of buyers vehicles or purchase unit during installation. We will NOT refund for the installed unit. It strongly requires professional installation and dyno tuning for best result !
PIVOT Raizin volt stabilizer, comes with options: with or without Super Earth spark plug earth tune-up system. Including all installation hardware and manual, made in Japan.
- Increases torque at low and middle speeds.
- Stabilizes idling and improves engine kink-over.
- Improves engine response.
- Increases headlight brightness.
- Improves fuel economy.
- Improves battery life.
- Improves bass sound.
Performance parts detail information update
Product Name Pivot RAIZIN volt stabilizer - Universal voltage stabilizer systems
Price (US dollars) $85.00
Shipping & Handling $18.45
Option - ( with Pivot Grounding system $170.)
Sounds like a good system to me. but i just noticed this warning: Warning: IntakeOne.com will not be responsible for any damage of buyers vehicles or purchase unit during installation. We will NOT refund for the installed unit. It strongly requires professional installation and dyno tuning for best result !
keciks
New Member
it looks like my dad use in his car..thrasher said:we have raizin pivot volt stabiliser here. costs SGD$90
recommended to be used with grounding wires... that itself is another... SGD$60. don't really know how well it works... but dont mind forking out d cash to find out in the future.
ITS THE SAME DUDE!!~~ :lol:
lc-motospeed
Super Veteran
pivot is a well known car aftermarket car stuffs kinda thing, haha... but if it can b used for bikes, hmm, tats good, haha =)
in singapore they also have REVTEC impedance stabilizer
check revtec.com.sg
check revtec.com.sg
mohd_asrim67
New Member
Hi everybody....,
I've used VS. Not much impact.
From my experience..
a. Top speed up 10km/h
b. Headlight brighter a bit
c. Low to mid power improve a bit
d. FC-no improvement
I've used VS. Not much impact.
From my experience..
a. Top speed up 10km/h
b. Headlight brighter a bit
c. Low to mid power improve a bit
d. FC-no improvement
Hye asrim...
from where did you bought that VS in malaysia?...
i'm from penang...
my ym :- zal_boyz@yahoo.com
from where did you bought that VS in malaysia?...
i'm from penang...
my ym :- zal_boyz@yahoo.com
unlimited express
Super Veteran
Is this VS the same with relay? it has the same purpose, stabilizing the flow of voltage and creating a steady amount of voltage output. all you need is a bigger rectifier so your battery can supply the enough voltage without delay and drying out.
Just a guess guys.
Just a guess guys.
VS also cleans out the electrical interference or fluctuations...
ronnelmarc_21
Super Veteran
Sir traxx just want to comment,..traxxas-modifier said:
its in parallel connection of capacitors to increase the capacitance value,...coz if you series it it will decrease the capacitance
parallel resistors === is like series capacitors
series resistors ==== is like parallel capacitor
peace nothings personal....
chipops_spokies
New Member
is that true my fren?
unbelievable...
unbelievable...