• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Whats needed to convert AC to DC

goff_d_p

Super Veteran
Guys, just wondering, what has to be done if you want to convert your ac to dc for installing HID or Neon light?

Is there a simple way of doing it without costing a lot?
 

dehanz

New Member
traxxas-modifier said:
bro you dont need to convert.
use your mc battery if you need to use DC devices like HID.
Yeah, the power out from the battery is DC. Just make sure your alternator can supply enough to recharge the battery, or else the battery will be drained. Get yourself a higher capacity battery
 

goff_d_p

Super Veteran
I want to keep the bike as much as stock wiring as i can. I am trying to avoid adding or changing things. same with the switches, I want to keep using them so it's all stock.

I want to change the look and function of the bike, without major electrical changes
 

ronnelmarc_21

Super Veteran
they're right but just to answer your question, you just need rectifier(1 diode for half wave or 4-diodes for full wave rectifier) after passing through those diode its already DC but there are still ripple voltages or AC components,...after rectifier you can add a regulator or voltage regulator like LM7812 if you need exact 12V., and add also a capacitor in parallel to oppose the changes in voltage level everytime the rpm changes,...
FYI this how our MC chargers work...charger should be higher a lil bit in voltage to the battery to keep charging....

Hope it will help.
 

kikaipitoy

Super Veteran
ronnelmarc_21 said:
they're right but just to answer your question, you just need rectifier(1 diode for half wave or 4-diodes for full wave rectifier) after passing through those diode its already DC but there are still ripple voltages or AC components,...after rectifier you can add a regulator or voltage regulator like LM7812 if you need exact 12V., and add also a capacitor in parallel to oppose the changes in voltage level everytime the rpm changes,...
FYI this how our MC chargers work...charger should be higher a lil bit in voltage to the battery to keep charging....

Hope it will help.
@ronnelmarc

Very well said
 
Top