very true dats why you should use a close ratio transmission gear ratio!!Rjet100 said:pag drag di na pinag uusapan top speed ang pinag uusapan na dito eh kung gano mo kabilis kukunin ang 400kms
8)kng 400kms.. stock bike lang gagamitin ko bro iwas sa sabog...docgabby said:very true dats why you should use a close ratio transmission gear ratio!!Rjet100 said:pag drag di na pinag uusapan top speed ang pinag uusapan na dito eh kung gano mo kabilis kukunin ang 400kms8)
why naman sasabog kung hindi stock gear ratio???? :shock: :?:nanix said:kng 400kms.. stock gagamitin ko bro iwas sa sabog...docgabby said:very true dats why you should use a close ratio transmission gear ratio!!Rjet100 said:pag drag di na pinag uusapan top speed ang pinag uusapan na dito eh kung gano mo kabilis kukunin ang 400kms8)
nanix said:kng 400kms.. stock gagamitin ko bro iwas sa sabog...docgabby said:very true dats why you should use a close ratio transmission gear ratio!!Rjet100 said:pag drag di na pinag uusapan top speed ang pinag uusapan na dito eh kung gano mo kabilis kukunin ang 400kms8)
yup doc gabby po. sori about the several set backs with your new diablo....hehehe. i hope x project tunes it to perfection.nanix said:stock bike lang gagamitin ko sa 400kms... para di sasabog makina.hehehe
400 meters lang sana bro...
uy! doc gabby kaw ba yan?
nagkita rin tayo... hehehe
depends on what transmission gear ratio you are using.acidrain said:For Drag set-up what would you preferred
high speed or low speed sprocket combination?
for what application??? stock is g1-12/34, g2-16/30, g3-17/23, g4-22/23.sniper31 said:what the best tranny ratio pls!
again you have so many combination also you could experiment with again depending on the power of your engine.sniper31 said:what the best tranny ratio pls!
depende sa displacement mo. my sniper has a displacement of 210cc. i have logged 6k kms on it. the big valve head i used was made by hispeed using a stock intake and exhaust valves of raider 150. kung magkaproblema ako sa vlave i can just buy stock raider valves. my friends sniper has a displacement of 280cc used for drag. his intake valves are 25in 22ex, the head was also made hispeed.jolly joker said:baguhan po pwede po ba magtanong sa nyo mga sir?ano po ba magandang big valve head for daily use or drag?anong brand ang durable?ano po ba mas maganda na size nya 19mm/22mm or Exhaust - 20.13mm
Intake - 23.19mm???thanks!
docgabby said:depende sa displacement mo. my sniper has a displacement of 210cc. i have logged 6k kms on it. the big valve head i used was made by hispeed using a stock intake and exhaust valves of raider 150. kung magkaproblema ako sa vlave i can just buy stock raider valves. my friends sniper has a displacement of 280cc used for drag. his intake valves are 25in 22ex, the head was also made hispeed.jolly joker said:baguhan po pwede po ba magtanong sa nyo mga sir?ano po ba magandang big valve head for daily use or drag?anong brand ang durable?ano po ba mas maganda na size nya 19mm/22mm or Exhaust - 20.13mm
Intake - 23.19mm???thanks!