• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Yamaha Lc 135 Oil Cooler Kit Project

rhoitol

Super Veteran
cool..but....

why did they placed the heat meter on the oil cooler after they tested the effectivity..but in the first test, they placed the heat
meter on the dip stick...

just wondering..:eek:
 

mepanousis

New Member
cool..but....

why did they placed the heat meter on the oil cooler after they tested the effectivity..but in the first test, they placed the heat
meter on the dip stick...

just wondering..:eek:

If you look really carefully you will notice that the number the first time is 53, 5 c

The second time we can see that the hot side has 53,5 c and the cold side has 48 or less , so we can understand that the oil that comes FROM the engine has the same temp like before but the oil that goes TO the engine is a little bit colder.

So you have your answer that the second time the meter would give the same temp in the dip stick.

Still , your point is very good.This mod does NOT give lower temp in the oil tank but i can share some of my knowledge here.

The oil tank contains about 850ml of oil (53c temp) , the cooler has no more than 100ml of oil (temp 53 to 48) and we are using this small amount of oil to cool of the oil in the tank.

To make this work we need a really a good oil pump and a different position for the cooler.We need to have a diffirence of more than 20 degrees in the temp , we need a better flow of the oil and we need more amount of external oil which means that we need a bigger cooler.

Still its a very good idea and i am working on that......:)
 

traxxas-modifier

Super LOLO
Staff member
If you look really carefully you will notice that the number the first time is 53, 5 c

The second time we can see that the hot side has 53,5 c and the cold side has 48 or less , so we can understand that the oil that comes FROM the engine has the same temp like before but the oil that goes TO the engine is a little bit colder.

So you have your answer that the second time the meter would give the same temp in the dip stick.

Still , your point is very good.This mod does NOT give lower temp in the oil tank but i can share some of my knowledge here.

The oil tank contains about 850ml of oil (53c temp) , the cooler has no more than 100ml of oil (temp 53 to 48) and we are using this small amount of oil to cool of the oil in the tank.

To make this work we need a really a good oil pump and a different position for the cooler.We need to have a diffirence of more than 20 degrees in the temp , we need a better flow of the oil and we need more amount of external oil which means that we need a bigger cooler.

Still its a very good idea and i am working on that......:)
we can study the way how suzuki raider 150 flows their oil..
 
i think liquid cooling of sniper 135 is enough. i have been using my sniper for long rides and its very reliable. adding this accessories will reduce the oil pressure and amount that circulates with in the engine. by the way it's only my idea please correct if its wrong.
 

rowan

Super Veteran
i think liquid cooling of sniper 135 is enough. i have been using my sniper for long rides and its very reliable. adding this accessories will reduce the oil pressure and amount that circulates with in the engine. by the way it's only my idea please correct if its wrong.

when u get a bigger displacement u will surely need some things that will lessen heat in ur engine.
yes ur right on stock displacement no doubt about it, extending lifespan and keeping the performance is their motive bout this especially on upgraded displcement
 
when u get a bigger displacement u will surely need some things that will lessen heat in ur engine.
yes ur right on stock displacement no doubt about it, extending lifespan and keeping the performance is their motive bout this especially on upgraded displcement
sir when you had increased the displacement of your mc did you experience any alarms in your motorcycle about the temperature? if not, the temperature is still tolerable. High displacement motorcycles use liquid cooling alone.
 

rowan

Super Veteran
just arrived not so fresh from vietnam. suppose to be im going to use this , but my friend mr. chuck n.:dance: will surely need this one.
lowered my displacement so i have to dispose this . quality material indeed.
 

blackfly26

New Member
cool..but....

why did they placed the heat meter on the oil cooler after they tested the effectivity..but in the first test, they placed the heat
meter on the dip stick...

just wondering..:eek:
at first when they check the temp. of the oil they pointed the temp. meter at the dip stick because there's the only way to check the temp. of the oil without the oil-cooler, and after installing the oil-cooler they check it on the radiator from the right side of the radiator is the oil that is coming from the engine (that has not been cooled) and on the left side is the oil that has been cooled down and will go back to the engine. is my explanation ok?
 

kr.r_sniper

Super Veteran
Ganda nito :D ung mga SniperMX na kumuha sa akin mga mamaw un :D puro Positive Feedback :D

wait nyo lapit na ung pang Sniper Classic 2 to 3 weeks from now..
 

HADZ

New Member
gud pm as ko lng sa 3s shope po b availabe yan oil cooler new user po ko ng snipermx tnx help nman san mabili yan sir
 
Top