Yamaha T135 Bearing Codes

[MasterJAD]

thanks sir traxx

 

[Gaslen]

thank you for the info sir.....

 

[agustin arcilla]

Yamaha T135 Bearing Codes and Oil Seal

Bearings
Crankshaft Left = 6305/C3
Crankshaft Right = 6305/C3
Camshaft = 6001-Z
Camshaft = 6906 /C3

Transmission =6002
Transmission =6202
Transmission =6004
Transmission =6204

Front Wheel Left =6300-Z/MT
Front Wheel Right =6300-Z/MT

Rear Wheel Left =6301-RS1/MT
Rear Wheel Right=6301-Z/MT
Rear Sprocket Drum =6004-Z/C3

Water Pump bearing =6000
Clutch Plate pressure bearing = 6901

Oil Seal
kick starter oil seal = 16 x 26 x 5
engine sprocket oil seal = 20 x 35 x 5
waterpump oil seal = 10 x 31 x 13.5
rear mags sprocket oil seal = 26 x 42 x 8
front mags oil seal = 20 x 35 x 7

Hope that helps guys

how about the oil seal for front fork shock?

 

[traxxas-modifier]

how about the oil seal for front fork shock?

its oil seal specifically for yamaha bikes, no generic size

 

[kr.r_sniper]

up

 

[Gaslen]

mga sir ask ko sana san ako makakabili bearing sa waterpump at oilseal?

 

[bhek_21]

what is the bearing code for the steering ball race bearing (upper and lower)??

 

[thienchicks]

Clutch plate pressure 6901: same code 24x12x6 SKF 61901-2z with cover. I had replaced it at 27000km but wonder if it working without oil. Any help.

 

[traxxas-modifier]

Clutch plate pressure 6901: same code 24x12x6 SKF 61901-2z with cover. I had replaced it at 27000km but wonder if it working without oil. Any help.

you can remove the cover of any bearings with a knife...

 

[kojack]

can anyone point out where the "Clutch Plate Pressure bearing = 6901" is located for me... thanks in advanced..

 

[traxxas-modifier]

can anyone point out where the "Clutch Plate Pressure bearing = 6901" is located for me... thanks in advanced..

Hi bro

Clutch plate bearing 6901 is for Hand Clutch version only...
the image you posted is from automatic version

 

[kojack]

Hi bro

Clutch plate bearing 6901 is for Hand Clutch version only...
the image you posted is from automatic version

Oopss my bad noobs ere. thanks traxxas.. T135SE/T135S. is it possible the cracking/grinding rough sound is caused from an old wear n tear (4)friction plate...

 

[Marc Tefora]

same problm Clutch plate bearing 6901.nabili ko sa autoshop koyo 200pesos!

@traxxas-modifier tnx.

 

[Alexis643]

mga sir san po nkakabili netong oil seal n to.?rear mags sprocket oil seal = 26 x 42 x 8..?

 

[traxxas-modifier]

hi guys

english please...

 

[Abbie S Hir]

Yamaha T135 Bearing Codes and Oil Seal

Bearings
Crankshaft Left = 6305/C3
Crankshaft Right = 6305/C3
Camshaft (small bearing) = 6001-Z
Camshaft (big bearing) = 6906

Classic tranny 4speed
Transmission =6002
Transmission =6204
Transmission =6004
Transmission =6202

MX tranny 5speed
Transmission =6003
Transmission =6204
Transmission =6004
Transmission =6202

Front Wheel Left =6300-Z/MT
Front Wheel Right =6300-Z/MT

Rear Wheel Left =6301-RS1/MT
Rear Wheel Right=6301-Z/MT
Rear Sprocket Drum =6004-Z/C3

Water Pump bearing =6000
Clutch Plate pressure bearing (handclutch version)= 6901

Oil Seal
kick starter oil seal = 16 x 26 x 5
engine sprocket oil seal = 20 x 35 x 5
waterpump oil seal = 10 x 31 x 13.5
rear mags sprocket oil seal = 26 x 42 x 8
front mags oil seal = 20 x 35 x 7

93102-12891 Oil seal shifter = 12 x 22 x 5
93101-10843 oil seal crankshaft right side = 10 x 18 x 6


Hope that helps guys

Sir traxxas san nakalagay ung camshaft small bearing?ksi pgkakaalam k isa lng bearing ung cams ung malaki...

 

[Abbie S Hir]

anu bearing code ng conrod bearing sir traxxas?

 

[kim19]

crankshaft bearing yata ang hanap mo!nandyan na ang sagot.!
6305.

 

[Abbie S Hir]

hndi bos..dba me bearing din mismo s conrod at pin nya?

 

[Banana]

i just want to add this oil seal for front forks 26*37*10.5
Sorry to interupt all of you masters
I always change my oil seals in forks due to off road use of my sniper
ride with god behind you