plus Big valve Head..i choose 62mm block & 3.5mm jack crank...![]()
24/22 valve...plus Big valve Head..
malossi/TOP 63mm with faito crank 3.5mm....If you were to build a 200cc monster motor, which would you choose? X1R 65mm block or 3.5mm jack crank with 62mm block.![]()
Interesting but takes the fun out of itI choose to get a 250cc bike. Hassle free. Last longer than the modify bike ~XD~
. If you knew me, you'd know that stock just isn't enough. If bought a 250cc, I'd be looking to make it a 300cc! 
Longer stroke mean longer leg. Same meaning. What happen if u have longer leg? You run one step, and the short leg have to run two stepmay i ask..what is jack crank..?
That the advantage.. So long stroke = More power and more torque but Short stroke = higher RPM. (Accidentally read that on some book..) 
why just choose one when you can get them both...you can't compare it to a leg...longer stroke with stroker pin is a different thing..you'll be surprise with the result if you have them and not by just reading themLonger stroke mean longer leg. Same meaning. What happen if u have longer leg? You run one step, and the short leg have to run two stepThat the advantage.. So long stroke = More power and more torque but Short stroke = higher RPM. (Accidentally read that on some book..)
![]()

sir so its still depends on where it was balanced..what if example a balanced crank in a 60mm piston is wore by a stock bore..what could be the difference?.5mm offset difference in crank pin location. One is balanced and one is not. Example..........you upgrade to a 60mm piston, the stock crank would then be "balanced" to the heavier piston to reduce vibration/wear and maximize performance. Of course same can be done to stock piston as well.