LESSON 2
High Performance
Some engines use double valve springs where a smaller diameter spring is inside the outer one.
Other engines even use triple valve springs. Don't forget that the valve spring not only closes the valve, but also pushes all the other parts such as the retainer, rocker arm, pushrod, and lifter, back against the cam; so increasing valve spring tension increases camshaft and lifter wear dramatically.
you might assemble an engine with heavy duty, super high tension valve springs, but don't expect the cam and lifters to last very long. Since you probably don't mind re-building an engine between racing seasons, this is probably acceptable, but a manufacturer could not offer a warranty on a bike with an engine that needed to have its' cam and lifters replaced every year. He'd go broke.
Rather than increasing valve spring tension, the same result of HIGH ENGINE RPM can be obtained by decreasing the weight of the valve train. The springs have less work to do because the valve train has less inertia.