• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

Diy Hazzard Light (no Additional Gadget, No Wire Tampering And No Additional Switch)

j3nai

New Member
nope! doing this mod in your mc will just disable the quick switching on your signal lights.. that means you have to push the middle push button if you have to take a right turn after taking a left turn or vice versa..


so b4 i do signal i have to push twice?..middle button then left/right?enx..
 

astridnoelle

Veteran
In this TUT I'm going to show you how to make DIY hazzard w/o additional gadget, no wire tampering and no additional switch!!! Just follow the step by step procedure. There is only 2 things to remind this TUT will work on the "Stock Thailand Turn Light Assy", "Stock Indonesian Turn Assy" cannot do this TUT. I will show the differences of Thai & Indo Stock Trun Assy.


This is a Thai Turn Assy





This is the differences of the 2 Assy

Now this is a Indo Turn Assy






We will now proceed on the TUT... just follow the photo for this TUT sorry for the lo-quality picture i don't have a good cam (This TUT can be applied for both Sniper and Mio (Nouvo have a different turn assy).


1. you need to removed you headlight cover then you need to do the ff.



2.





3.



4. after the screws as been removed this is how it's look like



5.



6. after you removed the small box this is how it's look in the most inner part.



Put back all together the turn light assy and test your DIY Hazzard
(Note: Need to replace your Stock Flasher Relay to a Replacement Flasher Relay b'coz the Stock Flasher relay doesn't have enough Power to turn on the 4 light bulb.)

Here is the proof video on this TUT, showing you how this TUT works


Note: If your SMX are from the Philippine Market mostly have a Indonesian Parts, Sniper R (Some of this model can do the TUT) if you want to do this TUT and your Turn Assy is Indo OEM, you can buy a Thai Turn Assy at 10th Ave Caloocan City Ph or you can order a Thai Turn Assy from BOSS_JAY316
Sorry for my Bad English :confused:

Thanks for for liking :D

Does this work for x1r turn signal assembly? Thanks.
 

m.bolado14

Super Veteran
TS i did it but no hazard on !!! then i try to adjust more on the cutting but in the end the one with the humps i cut got broken!!! what shoul i do!!! and how much is this kind of assembly thxx TS!!!! unlucky me!!! :( D.I.Y destroy it yourself AHAHAHA lol
 

PiZZNeT

Super Veteran
TS i did it but no hazard on !!! then i try to adjust more on the cutting but in the end the one with the humps i cut got broken!!! what shoul i do!!! and how much is this kind of assembly thxx TS!!!! unlucky me!!! :( D.I.Y destroy it yourself AHAHAHA lol
If you readeth and follow the guide carefully i think there will be no problem at all but i doubt you dint follow all the instruction that is written on these. If you you gonna back read there are some of our fellow forum'ers tried these and failed due to over excitement and haste. But the rest who readeth and follow the instruction properly doesnt encountered any problem at all. OEM turn light assy price around 700 to 800 pesos.
 

sniper71

Veteran
successful !!!..ngawa ko ng maayos na wlang problema,.an dali lng!..may tinuruan ako at mga ginawan..libre bro dhil libre ko nakuha mula syo...tnx a lot....cnxa na mga admin d ako marunong mg inglish..=)
 

sniper71

Veteran
successful !!!..ngawa ko ng maayos na wlang problema,.an dali lng!..may tinuruan ako at mga ginawan..libre bro dhil libre ko nakuha mula syo...tnx a lot....cnxa na mga admin d ako marunong mg inglish..=)
 
E

Eldon Nol Loredo

Guest
how much is the Thailand turn assy and flasher relay on BOSSJHAY? and can i have its contact nos.?
 
E

Eldon Nol Loredo

Guest
ahh..four LED???front and rear?if you do that you cant use your normal signal light,when you use signal light it will hazard all the time....
(hirap kase english tskts)
i mean sir if you are using an LED signal lights you cant use ur stock relay, i have read that on other forums.
 

suplado010

Super Veteran
(hirap kase english tskts)
i mean sir if you are using an LED signal lights you cant use ur stock relay, i have read that on other forums.
yes sir tama kah hindi gagana ang stock relay kapag naglagay kah ng led(magiging hazard)...sabihin mo lang dun sa bibilan mo relay nah pang led...yung aken 40 pesos lang..
 
Thank you very much sir PiZZNeT... Has been looking for electricians to have my hazard lights installed with all those additional wirings and making holes on your fairings to fit the switch, turns out that was all useless thanks to this.
 
Top