very informative
nope! doing this mod in your mc will just disable the quick switching on your signal lights.. that means you have to push the middle push button if you have to take a right turn after taking a left turn or vice versa..
correct..you have to press middle first to release then make lef/right signal...so b4 i do signal i have to push twice?..middle button then left/right?enx..
very well said sircorrect..you have to press middle first to release then make lef/right signal...
In this TUT I'm going to show you how to make DIY hazzard w/o additional gadget, no wire tampering and no additional switch!!! Just follow the step by step procedure. There is only 2 things to remind this TUT will work on the "Stock Thailand Turn Light Assy", "Stock Indonesian Turn Assy" cannot do this TUT. I will show the differences of Thai & Indo Stock Trun Assy.
This is a Thai Turn Assy
![]()
![]()
This is the differences of the 2 Assy
Now this is a Indo Turn Assy
![]()
![]()
We will now proceed on the TUT... just follow the photo for this TUT sorry for the lo-quality picture i don't have a good cam (This TUT can be applied for both Sniper and Mio (Nouvo have a different turn assy).
1. you need to removed you headlight cover then you need to do the ff.
![]()
2.
![]()
![]()
3.
![]()
4. after the screws as been removed this is how it's look like
![]()
5.
![]()
![]()
6. after you removed the small box this is how it's look in the most inner part.
![]()
![]()
![]()
Put back all together the turn light assy and test your DIY Hazzard
(Note: Need to replace your Stock Flasher Relay to a Replacement Flasher Relay b'coz the Stock Flasher relay doesn't have enough Power to turn on the 4 light bulb.)
Here is the proof video on this TUT, showing you how this TUT works
Note: If your SMX are from the Philippine Market mostly have a Indonesian Parts, Sniper R (Some of this model can do the TUT) if you want to do this TUT and your Turn Assy is Indo OEM, you can buy a Thai Turn Assy at 10th Ave Caloocan City Ph or you can order a Thai Turn Assy from BOSS_JAY316
Sorry for my Bad English
Thanks for for liking![]()
nope this won't work on the X1-R b'coz they've got different turn light switch assy, X1-R Turn Assy is just like a Nouvo turn Assy.Does this work for x1r turn signal assembly? Thanks.
nope this won't work on the X1-R b'coz they've got different turn light switch assy, X1-R Turn Assy is just like a Nouvo turn Assy.
D.I.Y destroy it yourself AHAHAHA lolIf you readeth and follow the guide carefully i think there will be no problem at all but i doubt you dint follow all the instruction that is written on these. If you you gonna back read there are some of our fellow forum'ers tried these and failed due to over excitement and haste. But the rest who readeth and follow the instruction properly doesnt encountered any problem at all. OEM turn light assy price around 700 to 800 pesos.TS i did it but no hazard on !!! then i try to adjust more on the cutting but in the end the one with the humps i cut got broken!!! what shoul i do!!! and how much is this kind of assembly thxx TS!!!! unlucky me!!!D.I.Y destroy it yourself AHAHAHA lol
flasher relay is only 40petot...you can buy it anywhere...(suking tindahan)how much is the Thailand turn assy and flasher relay on BOSSJHAY? and can i have its contact nos.?

lol i mean i need a flasher relay that can make the four LED signal light bulb blink^^flasher relay is only 40petot...you can buy it anywhere...(suking tindahan)![]()
ahh..four LED???front and rear?if you do that you cant use your normal signal light,when you use signal light it will hazard all the time....lol i mean i need a flasher relay that can make the four LED signal light bulb blink^^
(hirap kase english tskts)ahh..four LED???front and rear?if you do that you cant use your normal signal light,when you use signal light it will hazard all the time....
yes sir tama kah hindi gagana ang stock relay kapag naglagay kah ng led(magiging hazard)...sabihin mo lang dun sa bibilan mo relay nah pang led...yung aken 40 pesos lang..(hirap kase english tskts)
i mean sir if you are using an LED signal lights you cant use ur stock relay, i have read that on other forums.
bro it's Yamaha X1no prob blackfly26 BTW is it a X1 or X1R?
, by the way will this DIY hazard light works if i am using a LED bulb for my signal lights? what type of flasher relay i should use. thanks bro.