Drag race T135 version

[alx.cruz]

had problems with the custom gear maker in manila, hopefully this week he mightl send me the gear. thats why its taking too long to finish.

if its ok with you, may i know who/where is that custom gear maker? precision?

and also, may I know the bore and stroke of your 200cc sniper?

thanks!

 

[SaM03]

subscribing

 

[chrisniper19]

watch mode

 

[docgabby]

it

if its ok with you, may i know who/where is that custom gear maker? precision?

and also, may I know the bore and stroke of your 200cc sniper?

thanks!

its GERCO MACHINE SHOP 210 A. bonifacio Ave ,between Sta. Catalina and Apo st, Q.c. Mr. Lino Francisco- owner tel no. (02)740-0189. it was recommended by precision. its a 65mm bore using the x1r aftermarket bore kit i bought from traxxas. stock stroke..193.86cc (the 4 valve limited displacement used to be 195cc, now 200cc due to the suzuki breed wars). close ratio 4 speed transmission. i am trying out a ratio that hopefully will be gud enough for a 4 speed against the 6 speed raiders?? hopefully????? and most importantly is the use of race gas.

 

[alx.cruz]

it

its GERCO MACHINE SHOP 210 A. bonifacio Ave ,between Sta. Catalina and Apo st, Q.c. Mr. Lino Francisco- owner tel no. (02)740-0189. it was recommended by precision. its a 65mm bore using the x1r aftermarket bore kit i bought from traxxas. stock stroke..193.86cc (the 4 valve limited displacement used to be 195cc, now 200cc due to the suzuki breed wars). close ratio 4 speed transmission. i am trying out a ratio that hopefully will be gud enough for a 4 speed against the 6 speed raiders?? hopefully????? and most importantly is the use of race gas.

nice, i know the place...

thanks for sharing... hopefully, i can build a drag sniper aswell...

I plan to use 62mm Uma bore kit with Faito crankshaft... hope i can get some advices from you with regards to transmission ratio for this king of set-up...

 

[docgabby]

nice, i know the place...

thanks for sharing... hopefully, i can build a drag sniper aswell...

I plan to use 62mm Uma bore kit with Faito crankshaft... hope i can get some advices from you with regards to transmission ratio for this king of set-up...

wow! that's great for us sniper lovers. hope our asses dont get whooped by the raiders...

 

[alx.cruz]

wow! that's great for us sniper lovers. hope our asses dont get whooped by the raiders...

well i hope so... but still there's a problem... as a friend mechanic told me once...

"it is easier to build a strong and fast bike for drag racing... what's hard is to find a good rider who can "feel" the bike and say where it is lacking in performance"

and only one rider i know who's like this... Joji "Hapon" Ishida...

 

[docgabby]

well i hope so... but still there's a problem... as a friend mechanic told me once...

"it is easier to build a strong and fast bike for drag racing... what's hard is to find a good rider who can "feel" the bike and say where it is lacking in performance"

and only one rider i know who's like this... Joji "Hapon" Ishida...

hmmm..i dont now hapon personally though i have seen him ride. you'd be extremely lucky to get him as a rider. he drove the open sniper built by x project. that sniper is now with nanix.

 

[P@simuno]

well i hope so... but still there's a problem... as a friend mechanic told me once...

"it is easier to build a strong and fast bike for drag racing... what's hard is to find a good rider who can "feel" the bike and say where it is lacking in performance"

and only one rider i know who's like this... Joji "Hapon" Ishida...

Yeah Hapon is really a very good race driver i saw him lots of races, suicidal driver, a devil riding a beast machine.

 

[PLDC]

if i make my sniper 07 model... like a mods of..

60-63 block..
cams idk what cams il be using.
V.spring.
cdi

what is my cc and can i beat stock raider150?
hope to help me guys

 

[jamskie]

if i make my sniper 07 model... like a mods of..

60-63 block..
cams idk what cams il be using.
V.spring.
cdi

what is my cc and can i beat stock raider150?
hope to help me guys

even stock bore and stock stroke sniper sir can beat a stock raider 150 with open pipe.
ask the masters here

 

[chrisniper19]

circuit cguro heheh.. pero pag pipe lang mukang mahirap ata paniwlaan

 

[PLDC]

chris yeap tama sa 400 stock vs stock di uubra.. circuit medyo medyo pa.. kaya nga ask ko sa mg mamaw dito eh ano b ibbgay ng gnyang mods ko..

 

[chrisniper19]

tingin ko pag stock na arwanpepti nid mo lang stock bore or bore up kit khit 57mm, rcdi, valve springs, pipe depende sau, turbo cams, clutch spring ska tamang combi ng sprocket sama mo na iridium spark plug ayon sa mga masters.............

 

[PLDC]

khit stock bore ??? anong cams magnda and v.spring cdi khit brt? fatio turbo b sinsbi mo? kano b yung gnun

 

[chrisniper19]

pm kr. r sniper.. stock bore un faito turbo cams saka valve spring ahm tri ovale rcdi tnung mo s knya...

 

[SaM03]

stock sniper vs stock raider.... sa 1km drag ewan ko lng hehehe.... lamang tlga ang raider sa 400m..

 

[SaM03]

khit stock bore ??? anong cams magnda and v.spring cdi khit brt? fatio turbo b sinsbi mo? kano b yung gnun

paps pwd ma tatalo ang raider 150 stock bore lng basihan, kung ang snipee mo naka stock bore tapos naka CDI,R-cam,V-spring, Racing Gears, Racing Crankshaft, Big Valve head, Ignition Coil, Racing Carburator, tsaka naka Iradium, cgurado bye bye Raider Huwanpeptey kahit sa 400m heheh

 

[PLDC]

@sam

basic mods lng muna pero ung basic na pwde lumaban sa raider....

 

[SaM03]

@sam

basic mods lng muna pero ung basic na pwde lumaban sa raider....

paps kung basic mods lng d kayanin sa 400m try mo hamunin 600 or 700m...