Bore and Stroke concepts:
When bore / stroke >1.04, it is called oversquare engine.
When bore / stroke < 0.95, it is called undersquare engine.
When bore / stroke between 0.95 - 1.04, it is called square engine.
OVERSQUARE ENGINE
An oversquare engine is generally more reliable, wears less, and can be run at a higher speed. This type of engine doesn't suffer from power, but low-rpm torque does to some degree. An oversquare engine cannot have as high a compression ratio as an understroke engine at same CC. This causes the oversquare engine to have poorer fuel economy, and somewhat poorer exhaust emissions.
UNDERSQUARE ENGINE
An undersquare engine usually has a lower redline than an oversquare one, but it may generate more low-end torque. In addition, it can have a higher compression ratio to a same CC oversquare engine. This also equals better fuel economy. An undersquare engine does not overheat as easily as similar oversquare engine. However, a longer stroke usually means greater friction, a weaker crankshaft, and a smaller bore means smaller valves which restricts gaseous exchange. Luckily, with the aid of modern technology, these are not the large problems that they used to be.
* Honda CBR150 is an oversquare engine with very short strokes. That's why it can rev so high but the bottom line torque is pretty weak.
* 135LC is a slightly undersquare engine (near to square engine, which is the most balance). That's y our bike have good torque and able to rev pretty high
Source: http://en.wikipedia.org/wiki/Stroke_ratio
When bore / stroke >1.04, it is called oversquare engine.
When bore / stroke < 0.95, it is called undersquare engine.
When bore / stroke between 0.95 - 1.04, it is called square engine.
OVERSQUARE ENGINE
An oversquare engine is generally more reliable, wears less, and can be run at a higher speed. This type of engine doesn't suffer from power, but low-rpm torque does to some degree. An oversquare engine cannot have as high a compression ratio as an understroke engine at same CC. This causes the oversquare engine to have poorer fuel economy, and somewhat poorer exhaust emissions.
UNDERSQUARE ENGINE
An undersquare engine usually has a lower redline than an oversquare one, but it may generate more low-end torque. In addition, it can have a higher compression ratio to a same CC oversquare engine. This also equals better fuel economy. An undersquare engine does not overheat as easily as similar oversquare engine. However, a longer stroke usually means greater friction, a weaker crankshaft, and a smaller bore means smaller valves which restricts gaseous exchange. Luckily, with the aid of modern technology, these are not the large problems that they used to be.
* Honda CBR150 is an oversquare engine with very short strokes. That's why it can rev so high but the bottom line torque is pretty weak.
* 135LC is a slightly undersquare engine (near to square engine, which is the most balance). That's y our bike have good torque and able to rev pretty high

Source: http://en.wikipedia.org/wiki/Stroke_ratio


