Today I finally get the figures out for our stock camshaft and Yamaha Genuine Racing camshaft (measured while turning the crankshaft by a mechanic)
Here's the stock figure:
IN duration: 225 degree
EX duration: 275 degree
IN opens 15 degree before TDC.
IN closes 30 degree after BDC.
EX opens 80 degree before BDC.
EX closes 15 degree after TDC.
Tapette setting: IN 10, EX 12.
Here's the yamaha race cam figure:
IN duration: 335 degree
EX duration: 315 degree
IN opens 75 degree before TDC
IN closes 80 degree after BDC
EX opens 80 degree before BDC.
EX closes 30 degree after TDC.
Tapette setting: IN 25, EX 20.
Well, I forgot to ask the mechanic to help me measure the amount of lift at the lobe center.
No wonder last time I always get a sudden power drop at mid range rpm when using the Yamaha Genuine Race Cam. GOSHH it is just too extreme for street use.
However, this racing cam is a good pair with a long stroke 240cc prototype engine that we are experiment on.
If you have any suggestions, please let me know how to improve the camshaft design.
Here's the stock figure:
IN duration: 225 degree
EX duration: 275 degree
IN opens 15 degree before TDC.
IN closes 30 degree after BDC.
EX opens 80 degree before BDC.
EX closes 15 degree after TDC.
Tapette setting: IN 10, EX 12.
Here's the yamaha race cam figure:
IN duration: 335 degree
EX duration: 315 degree
IN opens 75 degree before TDC
IN closes 80 degree after BDC
EX opens 80 degree before BDC.
EX closes 30 degree after TDC.
Tapette setting: IN 25, EX 20.
Well, I forgot to ask the mechanic to help me measure the amount of lift at the lobe center.
No wonder last time I always get a sudden power drop at mid range rpm when using the Yamaha Genuine Race Cam. GOSHH it is just too extreme for street use.
However, this racing cam is a good pair with a long stroke 240cc prototype engine that we are experiment on.
If you have any suggestions, please let me know how to improve the camshaft design.
