• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

hard shifting gear

F

frdnnd_ferrer

New Member
sir, its hard to shift/change gear to second specially morning when i started my sniper 135 yamaha eventhough i warmed it up for five to seven minutes, how can i make it easier to change gear? what will i do? please help me. i'm just a rookie here. thanks and more power. by the way mine is an automatic clutch type.
 
wingman44

wingman44

Super Veteran
frdnnd_ferrer said:
sir, its hard to shift/change gear to second specially morning when i started my sniper 135 yamaha eventhough i warmed it up for five to seven minutes, how can i make it easier to change gear? what will i do? please help me. i'm just a rookie here. thanks and more power. by the way mine is an automatic clutch type.
Click to expand...
That's highly irregular. You should be able to shift the gears around even when the engine is cold and even if the engine is not running.

I suggest that you go and see a really reliable T135 mechanic instead of guessing and experimenting about what to do with your bike.

Also, it is quite difficult for us to give you a definitive advice on how to fix your bike without thoroughly checking it out.
 
wingman44

wingman44

Super Veteran
Rjloks said:
sir wing man diba mahirap talaga i kambyo ang matic??? medyo matigas?
Click to expand...
A/C gamit ko regularly pero hindi ko na-encounter na mahirap magkambyo.

In fact, naka rear set ako for as long as I can remember pero never pa kong nahirapang magkambyo.

Ngayon ko lang narinig na mahirap ikambyo pag matic.
 
Rjloks

Rjloks

Super Veteran
as i experience kasi sa motor ni boneslee medyo matigas yung kambyo nya.
hes using x1r rearset. and sniper A/C
 
wingman44

wingman44

Super Veteran
Rjloks said:
as i experience kasi sa motor ni boneslee medyo matigas yung kambyo nya.
hes using x1r rearset. and sniper A/C
Click to expand...
Ganun ba?

May adjustment sa clutch ng sniper a/c. para mapalambot ang shifting ng kambyo. Madali lang gawin ito. Kahit sinong mekaniko magagawa ito.

Kung naka- X1R RS naman siya, baka merong mali sa pagkaka install ng RS nya. Kasi yung mga kinabitan namin dito ng X1R RS, wala namang nagsabing nahihirapan sila sa kambyo nila.
 
raider125jeigh

raider125jeigh

Super Veteran
frdnnd_ferrer said:
sir, its hard to shift/change gear to second specially morning when i started my sniper 135 yamaha eventhough i warmed it up for five to seven minutes, how can i make it easier to change gear? what will i do? please help me. i'm just a rookie here. thanks and more power. by the way mine is an automatic clutch type.
Click to expand...
baka palitin na ung langis mo..hehehe... try mo semi synth...sarap ng shifting.. kung hindi naman diyan ang issue... either sa mga nasabi nila o may dpat talaga icheck diyan
 
X1rCJ

X1rCJ

Super Veteran
naka RS ba ikaw sir TS? kase kung naka-RS ka na, may part na mahirap talaga magkambyo, meron pa kase need na i-adjust para lumambot ang shifting mo pag naka-RS na for AC sniper..
 
M

Mizpeh

Super Veteran
Ganyan din sa akin.

Mas matigas i-shift yung sniper ac ko kaysa sa X1R na may clutch.

Ganyan din yung Sniper ko kapag umaga, yung first shift ko from 1st gear to 2nd gear matigas minsan hidni ko pa maipasok. Afterwards ok na.
 
marvymavs

marvymavs

Veteran
Check the clutch adjustment screw at the left side of the engine of your A/C Sniper. Pag masyadong nakadiin ang settings titigas ang shifting mo. Sa lahat ng a/c na moped applicable tong procedure.

Loosen the lock nut (di diyes ata na liyabe yun)

Turn the adjuster using a flat head screwdriver clockwise (in) until maramdaman mong tumukod na siya.

Then loosen it 1/8 of a turn (counter ckockwise) then tighten the lock nut.

Clockwise turn - pahigpit - pag sinagad mo titigas ang pagshift mo.
Counter clockwise turn - paluwag - lalambot pero pag sumobra magislide ang clutch mo.

HTH :)
 
X1rCJ

X1rCJ

Super Veteran
marvymavs said:
Check the clutch adjustment screw at the left side of the engine of your A/C Sniper. Pag masyadong nakadiin ang settings titigas ang shifting mo. Sa lahat ng a/c na moped applicable tong procedure.

Loosen the lock nut (di diyes ata na liyabe yun)

Turn the adjuster using a flat head screwdriver clockwise (in) until maramdaman mong tumukod na siya.

Then loosen it 1/8 of a turn (counter ckockwise) then tighten the lock nut.

Clockwise turn - pahigpit - pag sinagad mo titigas ang pagshift mo.
Counter clockwise turn - paluwag - lalambot pero pag sumobra magislide ang clutch mo.

HTH :)
Click to expand...
ei papz marvy..sama ka sa EB maya..
 
marvymavs

marvymavs

Veteran
sniperCJ said:
marvymavs said:
Check the clutch adjustment screw at the left side of the engine of your A/C Sniper. Pag masyadong nakadiin ang settings titigas ang shifting mo. Sa lahat ng a/c na moped applicable tong procedure.

Loosen the lock nut (di diyes ata na liyabe yun)

Turn the adjuster using a flat head screwdriver clockwise (in) until maramdaman mong tumukod na siya.

Then loosen it 1/8 of a turn (counter ckockwise) then tighten the lock nut.

Clockwise turn - pahigpit - pag sinagad mo titigas ang pagshift mo.
Counter clockwise turn - paluwag - lalambot pero pag sumobra magislide ang clutch mo.

HTH :)
Click to expand...
ei papz marvy..sama ka sa EB maya..
Click to expand...
Naku sir gustuhin ko man hindi uubra.. nasa work ako sa ngayon dito sa global city hanggang 4am. saan ba kayo mag i-EB at anong group? sayang naman.. gusto ko pa namang makakilala ng co-forumers dito. :cry:
 
S

sniper1979

New Member
welcome to our world motorcycle riding...sniper is the best choice option to be your bike...ride safe mga bro....GOD Speed.....
 
mr_kulafu

mr_kulafu

Super Veteran
marvymavs said:
Check the clutch adjustment screw at the left side of the engine of your A/C Sniper. Pag masyadong nakadiin ang settings titigas ang shifting mo. Sa lahat ng a/c na moped applicable tong procedure.

Loosen the lock nut (di diyes ata na liyabe yun)

Turn the adjuster using a flat head screwdriver clockwise (in) until maramdaman mong tumukod na siya.

Then loosen it 1/8 of a turn (counter ckockwise) then tighten the lock nut.

Clockwise turn - pahigpit - pag sinagad mo titigas ang pagshift mo.
Counter clockwise turn - paluwag - lalambot pero pag sumobra magislide ang clutch mo.

HTH :)
Click to expand...

sir, ung 1/8 turn counter ckockwise, malambot n poh b i shift un?

sir, ask ko lng, minsan kapag nagsshift ako from first gear to second gear, ang lakas ng tunog, kung sumalpak eh hnd katulad kpg nagsshift ako s 3rd and 4th gear, bakit poh kaya ganon?
 
LoveMeDead

LoveMeDead

Veteran
yun sakin dati lumalagitik din pag change gear medyo matigas sya,, pero nun nagpalit ako langis na motul 5100 okay na shifting ko super smooth ang pasok.. sakin lang po yun, hindi ko lang lam baka may iba issue sayo.. try mo rin po muna palit, hehehe
 
You must log in or register to reply here.
Top