• If your have CLUB EVENTS/RIDE & would like to announce it here,
    Message traxxas-modifier about it :-)

HAZARD LIGHT INSTALLATION

guitarizta

Super Veteran
Hazard light wiring diagram. Stock indicator bulb still working without modification & hazard light working with ignition switch off.
Cathode of diode1 & diode 2 connected to left & right signal lights ( chocolate & dark green). Use 1n5401 (3ampere diode).

View attachment 16302
Sir how about this diagram, the flasher relay is already replaced right?
how about the switch? is that the stock switch or another switch (SPST switch)?
if it's another switch, i'll just tap that negative(-) wire from the switch?

sorry for the many questions, i hope u can answer them all..
the other diagram you posted in the other thread seems too advanced in my basic electronic skills:D ..that's is why i'm going to try this one first
 

thon

Super Veteran
Sir how about this diagram, the flasher relay is already replaced right?
how about the switch? is that the stock switch or another switch (SPST switch)?
if it's another switch, i'll just tap that negative(-) wire from the switch?

sorry for the many questions, i hope u can answer them all..
the other diagram you posted in the other thread seems too advanced in my basic electronic skills:D ..that's is why i'm going to try this one first
It's another flasher relay & SPST switch bro.
Heres another circuit not using diodes. Use DPST switch or DPDT switch.;)
h.jpg
 

guitarizta

Super Veteran
wow, thank you sir you are very accommodating..
sir thon, what is the difference with the diagram on this thread with the other one you made (the one with 2 pcb relay)?
 

thon

Super Veteran
wow, thank you sir you are very accommodating..
sir thon, what is the difference with the diagram on this thread with the other one you made (the one with 2 pcb relay)?
the one with 2 relays can still use signal lights with hazard lights on, with hazard lights off hazard lights will be enabled during braking action.
 

sniper71

Veteran
tnx to those who post this diagram...i made it in my snipee..i have now hazard lights...(hrap mg-ingles,=)...)GOD bless u all mga paps !!!
 

kikaipitoy

Super Veteran
Thanks to this thread I was able to install mine....just wanna share some pictures, this where I installed the switch. Bill of Materials: Relay 80pesos, switch 25 pesos, diode 5pesos each. Not Bad
 
Top